Hisense L1-04 Remote Controller Instruction Manual

Hisense L1-04 Remote Controller Instruction Manual

Thank you very much for purchasing this Air Conditioner. Please read this instruction carefully before using this appliance and keep this manual for future reference.

Remote controller

The remote controller transmits signals to the system.

Indication symbols on LCD:

Note: Each mode and relevant function will be further specified in the following pages.

How to Insert the Batteries

How to Use

1. Remove the battery cover according to the arrow direction.
2. Insert new batteries making sure that the (+) and (-) of the battery are matched correctly.
3. Reattach the cover by sliding it back into position

Note:
Use 2 LR03 AAA(1.5volt) batteries. Do not use rechargeable batteries. Replace batteries with new ones of the same type
when the display becomes dim.

Storage and Tips for Using the Remote Controller
The remote controller may be stored and mounted on a wall with a holder.
Note : The remote controller holder is an optional part.

To operate the room air conditioner, aim the remote controller at the signal receptor. The remote controller will operate the air conditioner at a distance of up to 7m when pointing at the signal receptor of the indoor unit.

Operation instructions

Operation modes
Selecting mode

• Press the MODE button once once
• Result: The operation modes changed in sequence:

Heating mode is NOT available for cooling only the air conditioner

FAN mode

• Press the button once once
• Result: The fan speed is changed in sequence:

In “FAN ONLY” mode, the “AUTO” is not available.
At “DRY” mode, Fan speed is set at “AUTO” automatically, the “FAN” button is ineffective in this case.

Setting temperature

• Press TEMP. button onc
• Result: Raise temperature setting by 1℃
• Press TEMP. button once

• Result: Lower temperature setting by 1℃
  Range of available set temperature

  *HEATING, COOLING| 16℃~30℃
  DRY| -7 ~ 7
  FAN ONLY| unable to set

Note: Heating mode is NOT available for cooling-only models.
*Note:
Remote controller
In “Dry” mode, a decrease or rise of up to 7℃ can be set if you still feel uncomfortable.

Turning on

• Press button.
• Result: The RUN indicator of the indoor unit lights up.

SWING, SMART, TIMER ON, TIMER OFF, CLOCK, 8°HEAT, SLEEP, and SUPER operation modes will be specified on the following pages.

• Changing modes during operation, sometimes the unit does not respond at once. Wait 3 minutes.
• During heating operation, airflow is not discharged at the beginning. After 2－5 minutes, the airflow will be discharged until the temperature of the indoor heat exchanger rises.
• Wait 3 minutes before restarting the appliance.

Airflow direction control
Vertical airflow(Horizontal airflow) is automatically adjusted to a certain angle in accordance with the operation mode after turning on the unit.

The direction of airflow can be also adjusted to your own requirement by pressing the remote controller. ” button of *Heating mode is only available for heat pump models.

Vertical airflow control (with the remote controller) Use the remote controller to set various angles of flow or specific angles as you like.

• Press the” button once.
• Result: The vertical adjustment louver will swing up and down automatically.
• Press the” ” button again.
• Result: The louvers swing to a suitable angle as desired.

Horizontal airflow control (with the remote controller)

Using a remote controller to set various angles of flow or specific angles as you like.

• Press the” button once.
• Result: The horizontal adjustment louver will swing left and right automatically.
• Press the” ” button again.
• Result: The louvers swing to a suitable angle as desired.

NOTE: If the unit doesn’t have four ways airflow function, you can adjust horizontal airflow by yourself.

• Do not turn the vertical adjustment louvers manually, otherwise, malfunction may occur. If that happens, turn off the unit first and cut off the power supply, then restore the power supply again.
• It is better not to let the vertical adjustment louver tilt downward for a long time at COOLING or DRY mode to prevent condensed water from dripping.

SMART mode(SMART mode(invalid for multi-system invalid for multi-system))

How to set SMART mode?

• Press the button.
• Result: Enters SMART mode(fuzzy logic operation) directly regardless of whether the unit is on or off.  Temperature and fan speed are automatically set based on the actual room temperature.

Heat pump models

Cooling only models

The SMART button is ineffective in SUPER mode.
Press the MODE button to cancel SMATR mode.
Note: Temperature, airflow, and direction are controlled automatically in SMART mode. However, for the inverter, you can choose from -7 to 7. if you still feel uncomfortable.

What you can do in SMART mode?

| Indoor fan speed alternates among Higher, High, Medium, low and Lower each time when this button is pressed.
__

Uncomfortable because of unsuitable flow direction.

| __

__

| Press it once, the vertical adjustment louver(horizontal adjustment louver) swings to change vertical airflow direction(horizontal airflow direction). Press it again, the swing stops.

How to cancel the SMART mode?

Press the button.
Result: The SMART mode will be canceled.

8°HEAT mode
8°HEAT mode is used to set 8° heating mode.
In 8°HEAT mode, the fan speed is set at “AUTO” automatically.

How to set 8°HEAT mode?

• Press the button in the heating mode.
• Result: The 8° heat mode will be started.

How to cancel 8°HEAT mode?
Press any button except for and , ,
Result: The display will disappear and the 8°HEAT mode will be canceled.

Note: In 8°HEAT mode, the default temperature is set to 8℃. 8°HEAT mode can be set only when the air conditioner works in the heating mode.

SUPER mode
SUPER mode is used to start or stop fast cooling or heating.
The SUPER mode can be set when the appliance is in operation or energized. In SUPER mode, you can set airflow direction or timer.

How to set SUPER mode?

Press the button in the cool mode.
Result: At higher fan speed, the set temperature automatically to 16℃.

Press the SUPER button in the heat mode.
Result: At auto fan speed, the set temperature automatically to 30℃.

How to cancel SUPER mode?
Press the SUPER, MODE, FAN, ON/OFF, SLEEP, or TEMPERATURE SETTING button.
Result: The display return to the original mode. Escape from SUPER mode.

Note:
The Appliance will continue working in SUPER mode for 15 minutes if you don’t escape from it by pressing any of the buttons mentioned above.

Timer mode
It is convenient to set the timer on with TIMER ON/CLOCK and TIMER OFF buttons when you go out in the morning to achieve a comfortable room temperature at the time you get home. You can also set a timer off at night to enjoy a good sleep.

How to set TIMER ON?

1. Press button.
   Result: ON 12:00″ flashes on the LCD

2. Press the button.
   Result: Once to increase or decrease the time setting by 1 minute. One and a half seconds to increase or decrease the time setting by 10 minutes. For a longer time increase or decrease the time by 1 hour.

3. When your desired time is displayed on LCD, press the TIMER ON button and confirm it.
   Result: A “beep” can be heard. The TIMER indicator on the indoor unit lights up. “ON” stops flashing.

4. After the set timer is displayed for 5 seconds, the clock will be displayed on the LCD of the remote controller instead of a set timer.

How to cancel TIMER ON?
Press the button again.
Result: beep” can be heard and the indicator disappears, the time on mode has been canceled.
Note: It is similar to setting TIMER OFF, you can make the appliance switch off automatically at your desired time.

QUIET mode In this mode, the air conditioner will work with low noise performance by low compressor frequency and low fan speed. This mode is only available for inverter models.
Note: Press the MODE, FAN, SMART, and SUPER buttons can cancel QUIET mode.

ECONOMY mode
In this mode, the air conditioner will bring you energy-saving performance by lower running currency.

CLOCK button

How to adjust the real-time?

1. Press the button for about 3 seconds.
   Result: The time flashes on the LCD.

2. Press and buttons.
   Result: Once to increase or decrease the time setting by 1 minute. One and a half seconds to increase or decrease the time setting by 10 minutes.
   For a longer time increase or decrease the time by 1 hour.

3. Press the button again for about 3 seconds.
   Result: The real-time is set.

IFEEL mode
The temperature sensor built-in remote controller is activated. It can sense its surrounding temperature, and transmit the signal back to the unit, the unit can adjust the temperature so as to provide maximum comfort.

How to cancel IFEEL mode?
Press the button for about 5 seconds.
Result: The transmit signal in the display will disappear, and the IFEEL function will be shunted off.
Note:
The default setting is IFEEL acting.

How to set IFEEL mode?
Press the button.
Result: The IFEEL function will be started.

Dimmer button
How to set the DIMMER?
Press the button to turn off the light and the display in the unit.

Note:
When the light is off, receive signal will turn on the light again.

SLEEP mode
SLEEP mode can be set in COOLING, HEATING, or DRYING mode. This function gives you a more comfortable environment for sleep. The appliance will stop operation automatically after operating for 8 hours. Fan speed is automatically set at low speed.

How to set SLEEP mode?
Each time button is pressed.
Result: The operation mode is changed in sequence:

SLEEP mode 1:

• The set temperature will rise by 2℃ at most if the appliance operates in cooling mode for 2 hours constantly, then keeps steady.
• The set temperature will decrease by 2℃ at most if the appliance operates in heating mode for 2 hours constantly, then keeps steady.

SLEEP mode 2:

• The set temperature will rise by 2 if the appliance operates in cooling mode for 2 hours constantly, decrease by 1℃ after 6 hours, then decrease by 1℃ after 7 hours.
• The set temperature will decrease by 2 if the appliance operates in heating mode for 2 hours constantly, rise by 1℃ after 6 hours, then rise by 1℃ after 7 hours.

SLEEP mode 3:

• The set temperature will rise by 1 if the appliance operates in cooling hours, then decrease by 2 after 6 hours, decrease by 1 after 7 hours
• The set temperature will decrease by 2 if the appliance operates in heating mode for 1 hour, decreased by 2 after 2 hours, then rise by 2 after 6 hours, and rise by 2 after 7 hours.

SLEEP mode 4:

• The set temperature will keep steady.
• Note: Press the SUPER, SMART, MODE, or FAN buttons to cancel SLEEP mode.
• Note: By pressing “Sleeping mode” four times, or selecting other modes like SUPER, SMART, OR FAN, you could cancel the sleeping function of those units without four sleeping curves.
• Note: Heating is NOT available for cooling only air conditioners.

Download PDF:Hisense L1-04 Remote Controller Instruction Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>