Varimixer A S 30008974 KODIAK 30 Mixer Metos Bear Instruction Manual
- June 12, 2024
- Varimixer A S
Table of Contents
KODIAK30
Spare parts manual
Valid from machine number:
30008974
All rights reserved for changes in construction
ORDERING OF SPARE PARTS:
Sale of spare parts for our mixers is attended by our spare part department. When ordering spare parts, the following information must be given:
- Type of machine
- Number of the machine
- Part number of the spare part in question.
- Method of conveyance
If any of the above information is missing, please contact Varimixer spare parts department before ordering.
A few spare parts are not sold alone, in such cases reference is made at the item number to the assembly number to be used for ordering. The assembly numbers are shown on the relevant pages.
Returning of spare parts is only allowed when agreed with Varimixer A/S
DRIVELINE
| Fig. no. | Part number | Description |
|---|---|---|
| 1 | RN20-87 | Ventilator |
| 2 | CR30-90 | Drive belt |
| 3 | STA3410 | Circlip |
| 4 | STA5750 | Hex cap screw |
| 5 | CR30-61.3 | Motor plate |
| 6 | CR20-128 | Pulley |
| 7 | CR20-129 | Pulley |
| 8 | STA2037 | Feather Key |
| 9 | STA3407 | Circlip |
| 10 | STA2004 | Feather Key |
| 11 | CR30-85.1 CR20-85.1 | Motor |
| 12 | 12 STA5834 | Lock Nut |
| 13 | 13 STA3413 | Circlip |
LIFTING SYSTEM
| Fig. no. | Part number | Description |
|---|---|---|
| 2 | STA2515 | Bearing bushing |
| 4 | CR30-83.1M | Lifting bolt |
| 5 | STA3410 | Circlip |
| 6 | CR30-63M | Crankshaft |
| 7 | CR20-62M | Lifting handle |
| 8 | CR20-62.9 | Cover for lift arm |
| 9 | STA3408 | Circlip |
| 10 | CR30-23M | Bowl arm mounted |
| 11 | CR20-68.5 | Shaft |
| 12 | CR30-63.3 | Absorber plug |
| 13 | CR20-110 | Tensile spring |
| 15 | CR20-23.5 | Gasket |
| 16 | STA3403 | Circlip |
| 17 | STA2019 | Feather Key |
| 18 | STA5605 | Set screw |
PLANETARY HEAD
| Fig. No. | Part number | Description |
|---|---|---|
| 1 | STA6460 | Pin |
| 2 | STA3515 | Circlip |
| 3 | 6006 2RS | Ball bearing |
| 4 | 6206 2RS | Ball bearing |
| 5 | STA3518 | Circlip |
| 6 | HK1816 | Needle bearing |
| 7 | R20-235 | Support washer |
| 8 | LR17 | Inner ring |
| 9 | STA3470 | Circlip |
| 10 | R20-32 | Planetary wheel |
| 11 | R20-31 | Planetary wheel small |
| 12 | STA2008 | Feather Key |
| 13 | LR15 | Inner ring |
| 14 | STA3414 | Circlip |
| 15 | CR30-108R | Radial Shaft Seal |
| 16 | RN20-272.1 | Cover |
| 17 | CR30-34 | Distance ring |
| 18 | CR30-36 | Eccentric disc |
| 19 | CR30-30.6 | Main shaft |
| 20 | RN20-108R | Radial Shaft Seal |
| 21 | STA5626 | Socket head screw |
| 22 | CR30-33.6 | Bayonet shaft |
| 23 | CR30-2.1 | Eccentric main |
| 24 | 42CR20-105 | Bayonet bushing |
| 25 | STA5729 | Socket head screw |
| 26 | CR30-37 | Distance ring |
| 27 | CR20-1 | Main bearing |
| 28 | HK2016 | Needle bearing |
| 29 | STA6283 | Pin |
| 30 | CR30-2.1MZ | Planetary head for scraper |
| 30 | CR30-2.3Z | Planetary head scraper+attachment drive |
| 31 | CR20-1Z | Main bearing |
| 32 | CR20-1.1Z | Main bearing, for attachment drive |
| 33 | CR30-2.11Z | Eccentric head assembly |
| 34 | CR30-2.1Z | Eccentric head |
| 35 | CR30-36Z | Eccentric disc |
| 36 | 42CR20-105Z | Bayonet shaft for scraper |
| 37 | CR30-30.5Z | Main shaft for attachment drive |
| 38 | CR30-30.6Z | Main shaft |
| 39 | CR30-33.6Z | Bayonet shaft |
ATTACHMENT DRIVE
| Fig. No. | Part number | Description |
|---|---|---|
| 1 | STA3410 | Circlip |
| 2 | STA5561 | Hand screw |
| 3 | STA6038 | Lock washer |
| 4 | R15-215 | Blind cover |
| 5 | CR30-211 | Cover |
| 6 | STA5625 | Socket head screw |
| 7 | CR30-50.1R | Attachment drive shaft |
| 8 | R100-143 | Distance bushing |
| 9 | RN20-37 | Distance bushing |
| 10 | STA3512 | Circlip |
| 11 | STA2031 | Feather Key |
| 12 | RN20-9 | Worm wheel |
| 13 | 6005 2RS | Ball bearing |
| 14 | STA3127 | Seal |
| 15 | CR20-8.2M | Drive housing |
| 16 | STA6248 | Pin |
| 17 | CR20-10Z | Attachment drive |
| 18 | CR30-50.1Z | Attachment drive shaft |
MACHINE COLUMN
| Fig. No. | Part number | Description |
|---|---|---|
| 1 | Machine frame | |
| 2 | STA5707 | Socket head screw |
| 3 | CR30-304 | Cover plate |
| 4 | 56CR30P-22 | Safety guard |
| 5 | 56CR20-109 | Switch plate |
| 6 | CR20-21.1R | Top cover |
| 7 | STA5750 | Hex flange bolt |
| 8 | STA5842 | Lock Nut |
| 9 | CR30-22.18 | Cam latch |
| 10 | STA5028 | Captive screw |
| 11 | 56CR20-110M | Switch bracket mounted |
| 12 | CR30-552.5M WR30-552.4M | Variable speed drive |
| 13 | 56CR30-280 | Filling tray |
| 14 | CR20-218 | Adjustable leg |
| 14a | CR20-218.1 | Rubber foot |
| **14c | CR20-218R | Adjustable leg |
| 15 | 56CR20-111M | Switch bracket mounted |
| 16 | STA3175 | Grommet oval |
| 17 | CR20-551 | Gasket |
| 18 | CR20-291M | Back plate |
| 19 | STA9008 | Special screw |
| *20 | CR20-430 CR20-430.2 CR20-430.3 | Transformer |
| *21 | STA5373 | Hex cap screw |
| *22 | STA5837 | Lock Nut |
| *23 | STA6014 | Washer |
| 24 | CR30-602 | EMC shield bracket |
| 25 | STA5803 | Wing Nut |
| 26 | CR10-601.1 | EMC filter |
ELECTRIC COMPONENTS
| Fig. No. | Part number | Description |
|---|---|---|
| 1 | CR20-501.13M | Control Panel |
| 2 | CR20-501.14M | C.P. for attachment drive |
| 3 | CR10-174.35Z | Emergency stop |
| Part number | Power supply cable |
|---|---|
| CR10-194.101M | DK 230V |
| CR10-194.102M | EU 230V |
| CR10-194.103M | UK 230V |
| CR10-194.104M | CH 230V |
| CR10-194.106M | US + CAN NEMA 5-15P, 120V |
| CR10-194.107M | AUS/NZL Type I 230V |
| CR10-194.112M | With out plug |
| CR10-194.113M | US + CAN NEMA L6-15P, 208V |
| Part number | Description |
|---|---|
| CR10-194.10 | Communication cable |
| CR10-550.2 | Seal Communication cable |
| CR10-550.3 | Seal Communication cable |
| CR20-542 | Main Cable |
| CR30-543.2 | Connection cable |
| CR10-601.1 | EMC filter |
| CR10-543.4M | Supply cable, 1x10A |
| CR20-543.6M | Supply cable, 2×6,3A |
| CR20-194.28M | Supply cable, Transformer |
| CR20-194.8M | Ground cable |
| R20E-418.10 | Fuse 10A |
BOWLS AND MIXING TOOLS
| Fig. No. | Part number | Description |
|---|---|---|
| 1 | CR30-75M | Bowl |
| 2 | CR30-75AM | Bowl B |
| 3 | CR30-78M | Hook |
| 4 | CR30-78AM | Hook B |
| 5 | CR30-27.4M | Flat beater |
| 6 | CR30-27.4AM | Flat beater B |
| 7 | CR30-28.1M | Whip |
| 8 | CR30-28.1AM | Whip B |
| 9 | 42CR30P | Scraper with standard blade |
| 10 | 42CR30AP | Scarper B with standard blade |
| 11 | 42CR30-204 | Scraper blade standard |
| 12 | 42CR30-204T | Scraper blade PTFE |
| 13 | 42CR30-204A | Scraper blade B standard |
| 14 | 42CR30-204AT | Scraper blade B PTFE |
| 15 | 22CR20 | Bowl truck |
| 16 | 22CR20-520 | Wheel for bowl truck |
Varimixer A/S
Elementfabrikken 9
DK-2605 Brøndby
P: +45 4344 2288
E: [email protected]
www.varimixer.com
Documents / Resources
|
Varimixer A S 30008974 KODIAK 30 Mixer Metos
Bear
[pdf] Instruction Manual
30008974 KODIAK 30 Mixer Metos Bear, 30008974, KODIAK 30 Mixer Metos Bear, 30
Mixer Metos Bear, Mixer Metos Bear, Metos Bear
---|---
References
Read User Manual Online (PDF format)
Loading......