Electrak EG0047 Floor Grommets Owner’s Manual
- June 12, 2024
- Electrak
Table of Contents
EG0047 Floor Grommets
Product Information
The product comprises of various types of grommets for access to
power and data. The available models are EG0010, EG0030, EG0040,
EG0045, EG0051, EG0052, EG0053, EG0035, EG0041, EG0042, EG0043,
EG0044, EG0025, EG0046, EG0047, and EG0048. They are made of
hard-wearing and durable ABS grey mouldings and conform to BS EN
61534-22. The product is designed for quick fit installation and
comes with removable carpet recess and cable flap feature. The
grommet lids can be closed while in use by using the cable flap
feature. The product is recommended for use in light traffic areas
and should be avoided to be positioned in walkways or under static
loads.
Product Usage Instructions
To install the product, follow the below instructions:
-
Choose the appropriate model based on your requirement.
-
Position the grommet in the desired location.
-
Push down the spring-loaded screws and rotate a quarter turn to
secure the grommet in place. -
If required, use the cable flap feature to close the grommet
lid while in use. -
Avoid positioning the grommet in walkways or under static
loads.
Note: For information on knockout sizes, refer to page 37 of the
user manual. If you require IP 66 assembled fixed or hinged lid
grommets with power and data sockets, please contact us on +44 (0)
370 608 9020.
floor grommets
access / power and data
EG0010
EG0030
EG0040
EG0045
Dimensions and technical information p. 37
Pack Cat. Nos. Plastic access grommets
Pack Cat. Nos. Plastic power and data grommets
Quick fit installation Precision engineered from hard wearing durable ABS Grey
mouldings. Other colours available to special order Conform to BS EN 61534-22
Simply secured by pushing down the spring-loaded screws and rotating a quarter
turn
Recommended for use in light traffic areas Avoid positioning in walkways or
under static loads
1 EG0010 144 mm Ø cut-out size 127 mm Ø
Can accomodate all cable types or three metal conduits up to a 20 mm Ø or 25
mm without foam
169 mm Ø cut-out size 152 mm Ø
Quick fit installation Precision engineered from hard wearing durable ABS Grey
mouldings. Other colours available to special order. Conform to BS EN 61534-22
Removable carpet recess Cable flap feature so grommet lid can be closed while
in use Simply secured by pushing down the spring-loaded screws and rotating a
quarter turn Recommended for use in light traffic areas Avoid positioning in
walkways or under static loads For information on knockout sizes p. 37
1 EG0030 169 mm Ø cut-out size 152 mm Ø
Allows power, data and flexible conduit up to 32 mm to pass through raised
access floor Lid can be locked with screw (included) Maximum number of
conduits : 9 x 20 mm Ø 5 x 25 mm Ø 3 x 32 mm Ø
1 EG0055 232 mm Ø cut-out size 215 mm Ø
High capacity grommet Recommended for installation in light traffic areas
Maximum number of conduits : 18 x 20 mm Ø 10 x 25 mm Ø
6 x 32 mm Ø
Aluminium access grommet
1
EG0040 13 A power grommet
Supplied complete with
13 A unswitched socket
1 EG0045 RCD 30 mA switched socket power grommet Supplied complete with 13 A RCD 30 mA switched socket passive
1
EG0051 13 A power/data grommet
Supplied complete with 13 A socket and
1 x 37 x 22 mm cut-out
1
EG0052 Data grommet
Supplied complete with data plate
2 x 37 x 22 mm cut-out
No knockout
Cleaners floor grommets 169 mm Ø
1
EG0053 Non-standard 5 A socket
1
EG0035 Single switched socket
Body cast aluminium Lid injection moulded plastic Nylon 66 with neoprene
cable gasket Secured by quarter-turn fasteners Floor depth 25 to 55 mm Access
grommet depth 60 mm (95 mm when back box included)
1 EG0015 144 mm Ø cut-out size 127 mm Ø
Allows power, data and flexible conduit up to 25 mm to pass through raised
access floor
Pre-wired power grommets
Recommended for use in light traffic areas For information on knockout sizes p. 37
169 mm Ø cut-out size 152 mm Ø
Cleaners socket version
1
EG0041 DP1332 – 3 m unfused
1
EG0042 DP1532 – 5 m unfused
1
EG0043 DP1313 – 3 m 13 A fused
1
EG0044 DP1513 – 5 m 13 A fused
Aluminium power grommet For information on knockout sizes p. 37 1 EG0025 13 A power grommet Supplied complete with 13 A switched socket
RCD 30 mA switched socket version
1
EG0046 DP1332 – 3 m unfused
1
EG0047 DP1532 – 5 m unfused
1
EG0048 DP1313 – 3 m 13 A fused
1
EG0049 DP1513 – 5 m 13 A fused
Please consult us for IP 66 assembled fixed or hinged lid grommets with power
and data sockets
contact us on +44 (0) 370 608 9020
36
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>