mokee Mini Transformable Baby Cot Instruction Manual
- October 28, 2023
- mokee
Table of Contents
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Mini Cot
Great design is all about making life easier and beautiful. The moKee mini cot does just that, with its modern colour range, minimalistic Scandinavian design and a range customisations to fit your needs and budget. One side can easily be removed when your child is around 24 months, increasing the moKee mini lifespan to up to 3 years old, whilst also saving you a lot of space’ Add pillows and extend the mini life even further by using it as a mini sofa.
IMPORTANT – RETAIN FOR SUBSEQUENT CONSULTATION – READ CAREFULLY
CONFORMS TO STANDARD SAFETY REQUIREMENTS EN 716
Warning: Be aware of the risk of open fire and other sources of strong heat,
such as electric bar fires, gas fires, etc. in the near vicinity of the cot.
Warning: Do not use the cot if any components are broken, damaged or missing,
and only use spare parts approved by the manufacturer.
Warning: Do not leave anything in the cot or place the cot close to another
product, which could provide a foothold or present a danger of suffocation or
strangulation, e.g. strings, blind/curtain cords
Warning: Do not use more than one mattress in the cot.
CAUTION:
The cot base is safest at the lowest position and must be set to this position
as soon as the baby is old enough to sit up.
The supports used to adjust the base when it is set to the low position must
be removed.
The thickness of the mattress selected must be such that the internal height
(i.e. the distance between the surface of the mattress and the upper part of
the cot frame) is at least 500 mm with the base at the lowest position and at
least 200 mm at the highest position.
The markings on the side of the stand indicate the maximum thickness for the
mattress to be used when the base is set to different positions.
The mattress to be used with this cot must be designed for 70 cm x 140 cm cots
and must not exceed 10 cm in height.
The length and width of the mattress must be such that the space between the
mattress and the sides and ends of the cot does not exceed 30 mm.
After assembly, check that all the assembly mechanisms are correctly tightened
and are checked regularly, and retightened if necessary.
Care: clean using a damp sponge and warm, soapy water. Never use any abrasive
products. When the child is able to get out of the cot on its own, the cot
must no longer be used for this child, to prevent any risk of falling.
ZACKARO LIMITED. Office 141 405 Kings Road, London, England, SW10 0BB, UK
In the set: You will need (not included):
8xA 8xB 4xC 4xD 1xE1 1xE2
Options available (not included):
buy atmokee.eu
IMPORTANT! DO NOT USE CASTER WEELS WHEN 1 SIDE IS OPEN
1
4xC 4xD 1xE1
2
4xA 4xB 1xE2
3
2xC ****
4
1. Please insert the screws C from below, not from above.
4xA 4xB 2XC 1xE2
5
4xA 4xB 1xE2
IMPORTANT! – THIS COT IS NOT A CO-SLEEPER – ONLY REMOVE THE LONG SIDE WHEN BASE (H) IS AT ITS LOWEST SETTING & IN CONJUNCTION WITH THIS WOODEN PANEL SECURELY ATTACHED (I)
0-6 months
top levels
6-24 months
the lowest
level
24-36 months
one side
open