SILVA LR2000 RC Work Light User Manual

SILVA LR2000 RC Work Light User Manual

PRODUCT OVERVIEW

The packaging contains the following parts:

• Lamp unit
• Headband
• Cable guide (side)
• Rechargeable Li-Ion battery 7.0 Ah
• USB-C charge cable
• Battery holder (7.0)
• Headband (top)
• Quick guide

BEFORE USE

BATTERY CHARGING
The battery needs to be charged before first use

1. Located on the side of the battery pack is a USB-C connector. Attach the included USB charge cable to this USB-C connector.
2. Connect the USB connection to a wall outlet, computer or other standard USB connection.
3. On the battery, there are 5 LEDs showing battery status during charging:

• Green light (all 5 LEDs) = battery is fully charged
• Red light blinking = battery is charging

Charge time is approximately 8 hours.

Note! When the battery is fully charged the charger automatically switches to maintenance mode.
Note! Never leave a battery unattended during charging.

ADJUST THE HEADBAND
The headband is ergonomically shaped to give comfortable fit. Use the 2 buckle adjustments to fit it perfectly to your head. Detachable top band included. Attach the headlamp in the head bracket by sliding the headlamp foot into the snap-in socket. To remove, slide the headlamp up and out of the bracket.

BATTERY CARRYING
The ergonomic battery holder keeps the battery in place and improves the comfort when you carry the battery on your head. You attach the battery holder to the headband and then easily slide in the battery

DURING USE

SILVA INTELLIGENT LIGHT AND FLOW LIGHT
SILVA Intelligent Light optimizes the light pattern by the unique combination of a long reach spot light and a close flood light. Our ingenious SILVA Flow Light takes the optimization even further by providing seamless tuning of the light pattern. Simply tilting the light downwards makes the beams wider to brighten up slower activities. When tilting the headlamp upwards, the light reaches longer to provide perfect vision when you move fast.

SWITCH ON YOUR HEADLAMP
A push button is located on the left side of the headlamp body. This button controls all light modes.

• To start the headlamp with Flow Light activated press push button with a short press.
• To start the headlamp with Flow Light deactivated press and hold push button for 1 second
• To cycle between the different modes use short presses.
• To turn the headlamp off press and hold button for 1 second
  

DEACTIVATED FLOW LIGHT
Flow Light deactivated means that the Light image will remain unchanged even if the headlamp is tilted up or down. This might be useful when the lamp is mounted on a helmet.

BOOST MODE
LR2000 RC has a Boost mode that temporarily increases the light output to 2300 lumen during 10 seconds.

To enter Boost mode, do as follows:

• Switch headlamp ON (with Flow light activated or deactivated)
• Keep the power button pressed until headlamp turns OFF and keep pressing the button until the headlamp switches back ON.
• Headlamp has now entered Boost mode
• The light will remain in Boost mode for 10 seconds and then return to the light mode from where you entered Boost mode (for example MED)

Note! During the 10 seconds the headlamp is in Boost mode it is not possible to use power button.

TEMPETRATURE CONTROL:
This headlamp might get hot. The headlamp temperature is depending on light mode, ambient air temperature and airflow (speed). Make sure to keep it away from children. Also, make sure it will not get in contact with sensitive or flammable material.
NOTE: Always make sure to disconnect the battery when the lamp is not is use

If the cooling is not sufficient, for instance if used while standing still, indoors or in high temperatures, then the light will automatically be reduced until acceptable surface temperature on the lamp body is reached. This means that the lower the ambient temperature, the stronger the light output.

LOW BATTERY WARNING
During operation of the headlamp there will be a low battery warning when 10% of the battery energy remains. This is done by flashing both LEDs for 1 second.

RESERVE MODE
During operation, the lamp will go into reserve mode when there is 10% power left of the battery. All LEDs will flash before the lamp goes into this mode. Reserve mode can be overridden by pressing the button.

Warning: If you have pressed the button when headlamp is in reserve mode no more low battery warnings will appear before the headlamp turns OFF.

BATTERY STATUS INDICATION
When battery is connected and the headlamp is switched on – the current battery status will automatically be visible for 30 seconds. To check battery status during use, the headlamp has to be switched OFF and then back ON again.

• 5 green LEDs = Fully charged
• 4 green LEDs = 80% of the battery remains
• 3 green LEDs = 60% of the battery remains
• 2 green LEDs = 40% of the battery remains
• 1 red LED = 20% of the battery remains

To get as much power as possible out from your battery, keep it away from low temperatures during use.

AFTER USE

MAINTENANCE
To make sure you get maximum performance from your headlamp, clean it regularly with a damp cloth. Headband cleaning – rinse in warm water.

TECHNICAL SPECIFICATIONS

• Wbeight headlamp   including headset: 129 g
• Battery weight: 235 g
• Battery  type: Li-ion 7.4 V, 7.0 Ah
• Reserve mode: 0.5 h
• Charging time: 8 h
• Water resistance: IPX5
• Operative temperature range: -20 – +60º
  

ABOUT LI-ION BATTERIES

The battery should be stored in a dry environment within the temperature range of-20°C and +35°C. If you would like to store your battery for a longer period (more than 30 days) the batter y should not be fully charged. This may cause loss of its characteristics. Li-ion batteries have a discharge rate of approx. 20% over a 30-day period. You can always charge a half full battery without damaging its characteristics. Do not expose the battery for extreme temperatures which may cause fire or explosion. Do not disassemble or mistreat the battery; risk for chemical burn. Keep away from children. Do not dispose of batteries in fire. This may cause an explosion. Do not submerge the batteries in water. Do not short circuit the contacts. Replace only with Silva batteries with the same connector.

PROTECTING THE ENVIRONMENT.
Headlamp, batteries and packaging are recyclable. Please dispose these items at designated recycling stations.

WARRANTY

Silva warrants that, for a period of two (2) years*, your Silva Product will be substantially free of defects in materials and workmanship under normal use. Silva’s liability under this warranty is limited to repairing or replacing the product. This limited warranty extends only to the original purchaser.
If the Product proves defective during the Warranty Period, please contact the original place of purchase. Make sure to have your proof of purchase on hand when returning the product. Returns cannot be processed without the original proof of purchase. This warranty does not apply if the Product has been altered, not been installed, operated, repaired, or maintained in accordance with instructions supplied by Silva, or has been subjected to abnormal physical or electrical stress, misuse, negligence or accident. Neither does the warranty cover normal wear and tear. Silva is not responsible for any consequences, direct or indirect, or damage resultant from use of this product. In no event, will Silva’s liability exceed the amount paid by you for the product. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This Warranty is valid and may be processed only in the country of purchase.

*** Batteries:** 1 year

For more information please visit www.silvaweden.com

Visit: www.silva/environment for more information about the Waste Electrical and Electronic Equipment (WEEE) Directive.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>