meloght MEFLA40BL LED Flood Light User Manual
- June 12, 2024
- meloght
Table of Contents
meloght MEFLA40BL LED Flood Light
COMPONENTS AND STRUCTURE
SPECIFICATIONS
PAIRING LED LIGHT WITH “Smart Life” APP
*Step 1: ‘Smart Life App Download.**
There are 2 options for obtaining and downloading the ‘Smart Life’ App on your
smart device.
- Scan the QR code on the right.
- Search for “Smart Life” in the App Store or Google Play.
- Step 2: Enter the “S mart Life” App. Register an account and log in. If you already have an account for Smart Life App, Please select “Log in with existing account’.
- Note: You will need your “Smart Life” App username and password to pair with Amazon Alexa and/or Google Assistant.
Step 4: How to pair the LED Light
- Note: Please understand our access request, our application needs to access your relevant information, and the purpose is only to complete the pairing with the luminaire.
- Set the light to the pending pairing state.
- Power on the LED Light.
- Turn the light on and off 3 times until it starts flashing, indicating that the light is ready for pairing. Method 1
- Tap the ‘+* button on the top right corner and tap ‘Add Device’ to add a device.
- The app will automatically search for the device. After discovering the device, tap ‘Add’.
- Wait for the device to register (about 30-60s).
- Tap ‘Next’ to complete the light pairing.
- You can tap to change the device name.
- Tap ‘Done’ to enter the control panel.
Step 4: How to pair the LED Light
Method 2
- Tap’+* button on to p right corner and tap ‘Add Device’ to add the device.
- Tap ‘Lighting’ and then ‘PIR Light(BLE)’ to enter next page
- Tap the ‘Next* button to pair the LED Light.
- Wait or the device D to register (about 30-the 60s).
- Tap “Next’ to complete the light pairing.
- You can tap to change the device name.
- Tap “Done” to enter the control panel.
APP OPERATING INSTRUCTIONS
Note: When first connecting to the app, a prompt will pop up which can be exited by double clicking on the blank area.
RGB color interface
- Choose the color you want
- Adjust the color brightness
- Presets to save frequently used colors
- Set the timer
White-light mode interface
- Adjust the color brightness
- Presets to save co mmon brightness modes
- Set the timer
DIY mode interface
- Set the desired color
- Seled the rhythm mode
- Adjust the brightness and speed
Scene mode interface
- Set color’s jump
- Adjust the brightness and speed
Music mode interface
The light will change its color and brightness following the music collected by the microphone.
HOW TO CONTROL LIGHTS IN GROUPS
Note: If the light is offline, it cannot be grouped.
- Click More in any of the mode screens of any of the lights.
- Create a group
- Select the named group and operate the APP.
PREPARATION
Check all components for damage, do not use the product if it is damaged.
Estimated Assembly Time: 10-30 minutes
TOOLS REQUIRED
(not included)
- CAUTION: PLEASE MAKE SURE YOUR WALL SWITCH AND POWER AT MAIN CIRCUIT BREAKER BOTH ARE OFF. IF IN DOUBT ABOUT ELECTRICAL INSTALLATION, CONSULT A LICENSED ELECTRICIAN.
- WARNING: INSTALLING THIS LIGHT IN AN UNGROUNDED ELECTRICAL SYSTEM MAY CAUSE THE METAL PARTS OF THE LIGHT TO CARRY CURRENT IF ANY WIRES OR WIRE CONNECTIONS ARE DAMAGED OR LOOSE. IN THIS CASE, ANYONE WHO TOUCHES THE LIGHT WILL RECEIVE AN ELECTRIC SHOCK, RESULTING IN INJURY OR DEATH. BE CAREFUL NOT TO DAMAGE OR CUT THE WIRE INSULATION (COVERING) DURING INSTALLATION. DO NOT LET THE WIRES TOUCH ANY SHARP EDGES.
- WARNING: THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. RISK OF SHOCK- BEFORE BEGINNING INSTALLATION, TURN OFF ELECTRICITY AT THE CIRCUIT BREAKER BOX OR THE MAIN FUSE BOX.
INSTALLATION STEPS
- Step 1: According to the spacing (see the ‘A’ part of the picture) of two screw bits on the
- LED Light bracket, drill two mounting holes.
- Step 2: Put the bracket onto the prepared mounting holes and then screw it on.
- Step 3: Adjust the beam direction as you like, Wiring.
- Step 4: Adjust the beam direction as you like, and then plug into the main socket.
FCC ID: 2BBGOMEFLA100BL
FCC
Warning:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits a re de signed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measure
- Re-orient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the re elver is connected.
- Consult the dealer or an experienced radio/TV technician for help
- This equipment complies with FOC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Zhuo Yue Lighting Inte national Co., Limited
Unit C 9/F Winning House,
No.73 Wing Lok Street, Sheung Wan, Hong Kong,HK
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>