GLOSSIFY Gel Polishes Smart Lamp Instructions
- October 30, 2023
- GLOSSIFY
Table of Contents
GLOSSIFY Gel Polishes Smart Lamp
Product Information
Glossify Gel Polishes are a type of gel nail polish designed for professional use. They require curing under a low heat lamp for a specific amount of time to ensure a full cure. The smart lamp has been designed to help reduce heat spikes and provide an optimal curing environment.
If the Naturabuild gel feels wet and uncured, it may have been applied too thickly. We recommend building in thin layers to avoid this issue. If the side of the thumbs feels uncured, the client should put them in separately while holding the bottom of the lamp to ensure they stay in an upright position.
Product Usage Instruction
- Apply a thin coat of Basic Base or First Base. Seal the free edge and cure in a low heat lamp for 90 seconds.
- Apply the first layer of gel polish, seal the free edge and cure for 90 seconds.
- Apply the second layer of gel paint, seal the free edge and cure for 90 seconds.
- Apply a coat of Glossy top and seal the free edge and cure for 90 seconds. Glossy Top is no wipe.
- Finish with a sparing drop of cuticle oil.
Product Usage Instructions
- Apply a thin base layer of Naturabuild. Seal the free edge and cure in a low heat lamp for 90 seconds.
- Apply the second layer of Naturabuild, seal the free edge and cure for 90 seconds.
- Apply the third layer of Naturabuild, seal the free edge and cure for 90 seconds.
- Refine as desired and apply a coat of Glossy top, seal the free edge and cure for 90 seconds. Glossy Top is no wipe.
- Finish with a sparing drop of cuticle oil.
Note: It is important to follow these instructions carefully to achieve the best results and ensure a full cure. If you have any questions or concerns about using Glossify Gel Polishes, pleaseconsult the user manual or contact our customer service team for assistance.
All Glossify Gel polishes should be cured on 90 seconds low heat mode. The smart lamp has been designed to help reduce heat spikes, to ensure a full cure they must be cured for this length of time. If Naturabuild gel feels wet and uncured it has been applied too thick. We recommend building in thin layers. If the side of the thumbs feels uncured please ask your client to put them in seprately holding the bottom of the lamp to ensure they stay in an upright position.
APPLYING THE GEL – GEL POLISH
- Apply a thin coat of Basic Base or First Base. Seal the free edge and cure in a low heat lamp for 90 seconds.
- Apply the first layer of gel polish, seal the free edge and cure for 90 seconds. Apply the second layer of gel paint, seal the free edge and cure for 90 seconds.
- Apply a coat of Glossy top and seal the free edge and cure for 90 seconds. Glossy Top is no wipe.
- Finish with a sparring drop of cuticle oil.
APPLYING THE GEL – NATURABUILD
- Apply a thin base layer of Naturabuild. Seal the free edge and cure in a low heat lamp for 90 seconds.
- Apply the second layer of Naturabuild, seal the free edge and cure for 90 seconds.
- Apply the third layer of Naturabuild, seal the free edge and cure for 90 seconds.
- Refine as desired and apply a coat of Glossy top, seal the free edge and cure for 90 seconds. Glossy Top is no wipe.
- Finish with a sparing drop of cuticle oil.