LIVING glow CP-BL03-9WELN Battery Backup Light Bulbs User Manual

LIVING glow CP-BL03-9WELN Battery Backup Light Bulbs

Product Information

The New Battery Backup Light Bulbs are designed to provide light during power outages. These bulbs have a sleek design that can fit in any lamp or fixture. They work in multi-socket fixtures and lamps and have dimmable options for longer battery life when the power is out. The bulbs feature breathable air holes that allow air flow to the bulb battery. The battery power in the bulb is not at 100% out of the box, so it is recommended to fully charge the battery in the bulb for 10-12 hours for optimal performance. These bulbs come with sync instructions for multi-socket usage.

Features:

• Works in Multi-socket fixtures & lamps
• Sleek design to fit in any lamp or fixture
• Battery Backup Mode
• Dimmable Option for Longer Battery Life when the power is out
• Breathable Air Holes, allows airflow to the bulb battery

Sync Instructions for Multi-Socket Usage:

1. First, turn the light switch off.
2. Screw your bulbs into ANY multi-socket lamp or fixture. (This bulb will not work with any other dimmable or battery back up bulb)
3. If the bulbs are all off, this means they are already synced and there should be no need to do a sync setting. If any bulb remains on, this means they are not synced, please follow syncing instructions below.
4. Keep the light switch OFF before syncing, to sync the bulbs, turn your light switch ON and then OFF without delay (in less than 1 second).
5. Then leave the light switch OFF for 5 seconds.
6. This should make all the lights be in sync, and turn on and off at the same time.
7. If all the bulbs are still not syncing, please repeat this process 1 or 2 more times depending on the fixture wiring.
8. Once the bulbs are synced, you will NOT need to repeat this process anymore, bulbs have a memory function, remember your last choice. If you take out bulbs from the multi-socket fixture and then install them back, please follow the above sync instructions the first time of use.

Instructions for Everyday Use and Charging:

1. Leave the lamp or light fixture ON to charge. (Approximately 10-12 hours to fully charge) we can switch the light color to soft white/daylight by the switch on the bulb body in AC mode.
2. It is okay to charge the bulb and remove it for later use, just make sure to charge it once every few months to ensure it is fully charged when you need it.
3. When the power goes out and you would like to use your battery backup light bulb, the lamp or fixture will need to be plugged in and turned on, or the light switch on the wall needs to be turned on if not already, for the bulb to work during the power outage.
4. The charged bulb will also work by using the provided screw-on cap for light on the go.
5. The fully charged bulb will last up to approximately over 10 hours depending on whether you are using bright or dim mode.

How to Test Your Bulbs:

1. Fully charge the bulb using the instructions provided above.
2. Screw the provided power cap onto the bottom of the bulb.
3. Push the black button at the bottom of the cap. If the charged bulb illuminates, that tells you the bulb is working fine and it will work in the event of a power outage.
4. Putting the bulb in a lamp and unplugging the lamp will not simulate a power outage, and the bulb will not come on with this method. The bulb has a smart chip that determines if it is a power outage or if it is unplugged.

Product Usage Instructions

1. Before using the New Battery Backup Light Bulbs, read the complete instructions.
2. To sync the bulbs for multi-socket usage, follow the sync instructions provided above.
3. Leave the lamp or light fixture ON to charge for approximately 10-12 hours.
4. The charged bulb will last up to approximately over 10 hours depending on whether you are using bright or dim mode.
5. To test your bulbs, follow the instructions provided above.

Read complete instructions before use.

Features

• Works in Multi-socket fixtures & lamps
• Sleek design to fit in any lamp or fixture
• BatteryBackupModeDimmable
• Option for Longer Battery Life when the power is out
• Breathable Air Holes, allow air flow to the bulb battery.
  • Battery power in bulb is not at 100% out of the box, please fully charge the battery in the bulb for 10-12 hours for optimal performance.

Sync Instructions for multi-socket usage
This is for the first time use only and to make the bulbs turn on and off at the same time, and so that none of the bulbs turn back on when you turn your light switch off.

1. First turn the light switch off.

2. Screw your bulbs into ANY multi-socket lamp or fixture. (This bulb will not work with any other dimmable or battery back up bulb)

3. If the bulbs are all off, this means they are already synced and there should be no need to do sync setting. If any bulb remains on, this means they are not synced, please follow syncing instructions below.

4. Keep light switch OFF before syncing, to sync the bulbs, turn your light switch ON and
   then OFF without delay(in less than 1 second).

5. Then leave the light switch OFF for 5 seconds.

6. This should make all the lights be in sync, and turn on and off at the same time.

7. If all the bulbs are still not syncing, please repeat this process 1 or 2 more times depending on fixture wiring.

8. Once the bulbs are synced you will NOT need to repeat this process any more, bulbs have memory function, remember your last choice. If you take out bulbs from multi socket fixture and then install back, please follow above sync instructions at first time of use.

NEW FEATURE!!

Bulb can change between Daylight and Warm Light by flipping the new added switch.

Instructions for everyday use and charging

1. Leave the lamp or light fixture ON to charge. (Approximately 10-12 hours to fully charge) we can switch the light color soft white/daylight by the switch on the bulb body in AC mode.
2. It is okay to charge the bulb and remove it for later use, just make sure to charge it once every few months to ensure it is fully charged when you need it.
3. When the power goes out and you would like to use your battery backup light bulb, the lamp or fixture will need to be plugged in and turned on, or the light switch on the wall needs to be turned on, if not already, for the bulb to work during the power outage.
4. The charged bulb will also work by using the provided screw on cap for light on thego.
5. The fully charged bulb will last up to approximately over 10 hours depending on whether you are using bright or dim mode.

How to test your bulbs to know that it will work in a real power outage

1. Fully charge the bulb using the instructions provided above.
2. Screw the provided power cap onto the bottom of the bulb.
3. Push the black button at the bottom of the cap if the charged bulb illuminates that tells you the bulb is working fine, and it will work in the event of a power outage.
4. Putting the bulb in a lamp and unplugging the lamp will not simulate a power outage and the bulb will not come on with this method. The bulb has a smart chip that determines if it is a power outage or if it is unplugged.

To use the Battery Backup Mode Dimmable option

1. Using your already charged bulb.
2. Screw the provided power cap onto the bottom of the bulb.
3. Push the black button at the bottom of the cap for the light to illuminate in the dim mode.
4. Dim mode will allow the bulb battery to last longer during a power outage.
5. Push the black button at the bottom of the cap for the light to turn off.
6. Push the black button at the bottom of the cap for the light to illuminate in the bright mode.
7. To get the bulb back into the dim mode simply push the black button at the bottom of the cap againto turn the light off and then push it again to turn it back on in the dim mode.
8. The fully charged bulb will last up to over10 hours, depending on whether you are using bright or dim mode.

In DC mode, the light color can only be Daylight

Power Cap:
The power caps are a provided device that allows the LED rechargeable bulb to become portable, use it as a flashlight to carry in your hand or hang it anywhere with the attached hook. The power cap also allows you to use the bulb on bright mode or dim mode lighting. The power cap DOES NOT charge the bulb. You must charge the bulb in the lamp or light fixture per provided charging instructions.This device will only work with LED rechargeable Bulbs.

How to use the provided power caps

1. Using your already charged bulb.
2. Screw the provided power cap onto the bottom of the bulb.
3. Push the black button at the top of the cap to illuminate in the high brightness mode.
4. Push the black the top button of the cap to turn off the light.
5. Push the black button at the top of the cap to illuminate in the half-brightness mode.
6. Push the black button at the top of the cap to turn off.
7. Push the black button at the top of the cap illuminate in dim mode. Dim mode will allow the bulb battery to last longer during a power outage.
8. To get the bulb back into the high bright mode simply push the black button at the top of the cap again to turn the light off and then push it again to turn it back on in the high brightness mode.
9. The fully charged bulb will last up to over 10 hours depending on whether you are using bright or dim mode.

Bulb Stand:
The bulb stand is a device that allows the LED rechargeable bulb to stand/sit up on a table or hard surface. This device must be used with the provided power cap. It allows the bulb to still be portable but gives you the ability to set it near where you are needing light. The bulb stand DOES NOT charge the bulb. You must charge the bulb in the lamp or light fixture per provided charging instructions. This device will only work with LED rechargeable Bulbs.

How to use the bulb stand with the power caps

1. Using your already charged bulb.
2. Screw the provided power cap onto the bottom of the bulb.
3. With the cap already screwed on to the bulb, fold the hanger hook to the side.
4. Set the bulb inside the bulb stand.
5. The bulb can be turned on before or after the bulb with cap has been placed in the bulbstand.
6. See provided power cap instructions to turn the bulb on and off and how to switch from bright to dim mode.
7. To remove the bulb from the bulb stand, simply pick it up by the top of the bulb with one hand and hold on to the bulb stand with the other hand.

Power Plug Adapter:
The power plug is a device that allows the single socket lamp to become portable so you can move the lamp from one room to another. The power plug adapter DOES NOT charge the bulb. You must charge the bulb in the lamp or light fixture per provided charging instructions. This device will only work with LED rechargeable Bulbs.

How to use the power plug adapter

1. Using your already charged bulb.
2. Screw the bulb into a single source socket lamp (a lamp with only 1 socket to screw in 1 bulb).
3. Remove the power cord from the wall outlet.
4. Plug the outlet into the provided power plug adapter.
5. Turn the lamp on, and the bulb will illuminate until the bulb needs re-charged.
6. Use this device to make your once-stationary lamp portable.

Important Information

If used in a 3-way or dimmer switch type lamp the switch must be set on the last/highest setting of power for it to work properly. Remember to charge your bulb after each use to make sure it is ready for the next time you need it or charge it with everyday use. The Battery Backup Light Bulb has a smart chip, the smart chip detects a power outage as soon as it occurs and activates the bulb’s battery to provide up to approximately 6 hours of emergency light depending on whether you are using bright or dim mode.

The Smart chip protects the bulb’s battery and prevents it from overheating or overcharging. The Smart chip can also tell the difference between a power outage, and when you turn your light switch off or unplug your light fixture.This allows you to use the bulb just like a standard bulb, even during a power outage.

Made in China.

• This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
• (1) This device may not cause harmful interference, and (2) This device must accept any
• interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Responsible Party: KMS LLC, 811 E Waterman Wichita KS 67202, 1-800-752-5262

Customer Service and Questions
For questions or part(s) on your Living Glow Bulbs please visit our website at WWW.LIVINGGLOW.COM or email [email protected] If you have no online access please call 800-752-5262 x 251

Warranty

1 Year warranty with proof of purchase, you may be asked to return any defective bulbs for inspection before a replacement is sent.

“We keep it BRIGHT, even in the DARK!”

Documents / Resources

| LIVING glow CP-BL03-9WELN Battery Backup Light Bulbs [pdf] User Manual
CP-BL03-9WELN Battery Backup Light Bulbs, CP-BL03-9WELN, Battery Backup Light Bulbs, Backup Light Bulbs, Light Bulbs, Bulbs
---|---

References

• LivingGlow | Living Glow
• LivingGlow | Living Glow

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>