YANSUN H-WL059 Modern Black Wall Sconce with Clear Glass Tube User Manual

: October 30, 2023
: YanSun

Table of Contents

H-WL059 Modern Black Wall Sconce with Clear Glass Tube
Read User Manual Online (PDF format)
Download This Manual (PDF format)

USER MANUAL

H-WL059 Modern Black Wall Sconce with Clear Glass Tube

Thank you for purchasing our product
For questions or assistance on assembly, parts or installation, please contact customer support Please include the product number, orde* number if any, and your phone number in the email If there are broken or missing parts, please include the part numbers and quanties, and your address.
For hard to explain problems, please send us a few pictures showing the problems if you can We involve the factory technicians directy in the support, 50 you can be assured you wil deal with the experts.
CAUTION

Rated 110-130V/60Hz, bulb 40W-60W maximum
Care should be taken to avoid damage to the surface of lighting and wire. Wearing gloves are recommended when installing.
Keep lighting away from acid, alkali ard other corrosive chemical or gas. Clean the lighting with clean soft cloth only.
Installation must be carried out by qualified electrician only.
Disconnect the power before installing, cleaning and replacing lighting,
Never cover the lighting when power is connected.

The wiring connection of luminaire and outiet box
Connect the positive electrode of the main wire that is marked, to the positive electrode of the outlet box supply. wire. Connect the negative electrode of the main wire that is unmarked, to the negative electrode of the outie box supply wire. Connect the fixture ground wie to the outlet box ground wire with wire connectors.

YANSUN H-WL059 Modern Black Wall Sconce with Clear Glass Tube -
Figure2

Requires E26 40W-60W bulb (not included)

1A. Lock the mounting bracket on the junction box of the wall by using 2 pes of 5/32 screws in the accessories bag.
1B. Connect the wires. The positive (+) wire is the one which has writing on it. The negative (-) wire is the one which has no writing. The bare wire is the ground wire.
1C. Cover the wall plate and attach the screws to the wall plate.

Please note The parts in this table are completely unassembled, for illustrative purpose. In the actual product that you receive, some parts are assembled and attached together.