METALCRAFT GP937 Greenhouse Instruction Manual
- October 30, 2023
- Metalcraft
Table of Contents
METALCRAFT GP937 Greenhouse Instruction Manual
Assembly instruction
MODEL:GP937
PRODUCT SIZE(LxWxH): 433 X 250 X 228CM
PLEASE READ CAREFULLY BEFORE ASSEMBLY
Assembly and Maintenance Advice
- For safety purposes, we strongly recommend that this product is assembled by at least two people.
- Some components have sharp metal edges. Please be careful when handling metal components. Please wear gloves, shoes and safety goggles during assembly.
- Lay all of the components on a soft carpet or blanket to avoid any scratches or damages.
- DO NOT climb or stand on the roof. Heavy articles should not be leaned against the greenhouse.
- Keep the roof and gutter clear of snow, dirt & leaves. Allowing snow to build up on the roof may damage the product.
- Unlike steel, if the paint finish is scratched this will not harm the aluminum underneath.
- When your product needs cleaning, use a mild detergent solution and rinse with cold clean water. Do not use acetone, abrasive cleaners or strong detergents to clean the panels.
Tools Provided :
Tools Required when Assembly (Not Provided)
Assembly at least by two Persons
Important :
Rubber is not provided if you choose polycarbonate sheet as glazing panel.
Functions and Features:
1. Base anchor brackets are included as standard with expanding bolts to ensure a secure fixing into concrete or paving. Alternatively, you can use the brackets to fix into a timber base with wood screws (not provided).
2. The strong two part eaves beam includes an integral gutter. Downpipes are also included as standard so you can collect rainwater.
3. Manual window handles are included as standard with the roof vents. If required, automatic roof vent openers are available as an inexpensive optional extra.
4. Remove approximately 2 inches of film from all sheet edges before installing and remove all film immediately after the construction is completed. Please ensure that the side with the white film faces outwards.
5. This quality greenhouse features self-tapping screws to provide strong joints. As the name suggests, the screws tap their own thread. Driving in self-tapping screws requires more force than conventional screws. A powered screwdriver is therefore recommended.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>