hansgrohe PuraVida Single Lever Mixer Instruction Manual

hansgrohe PuraVida Single Lever Mixer

Product Information

• The product is a shower system with multiple models: PuraVida 15066000 / 15066400, 15072000 / 15072400, 15081000 / 15081400, 15070000 / 15070400, and 15075000 / 15075400.
• The product comes with a user manual with instructions in various languages including German, French, English, Italian, Spanish, Dutch, Danish, Polish, Chinese, Russian, Swedish, Lithuanian, Croatian, Turkish, Romanian, Greek, Slovenian, Estonian, Latvian, Serbian, Norwegian and Bulgarian.
• The shower system is designed for bathing, hygienic and body cleansing purposes only.
• Gloves should be worn during installation to prevent crushing and cutting injuries.
• The hot and cold supplies must be of equal pressures.
• The product has a maximum operating pressure of 1 MPa and a recommended operating pressure of 1.6 MPa. The test pressure is also 1.6 MPa.
• The product should not be used with silicone containing acetic acid.

Product Usage Instructions

• Wear protective gloves during installation to avoid injuries.
• Make sure the hot and cold water supplies have equal pressures.
• The shower system is for bathing, hygienic and body cleansing purposes only.
• Do not use silicone containing acetic acid with the product.
• Refer to the flow diagram on page 33 for information on water flow.
• Clean the product as instructed on page 35.
• Refer to the spare parts list on page 36 for replacement parts.
• Refer to the assembly instructions on page 31 for installation guidance.

Safety Notes

• Gloves should be worn during installation to prevent crushing and cutting injuries.
• The shower system may only be used for bathing, hygienic and body cleansing purposes.
• The hot and cold supplies must be of equal pressures.

Installation Instructions

• The fitting must be installed, flushed and tested after the valid norms.
• If the instantaneous water heater causes problems or
• if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.
• Hansgrohe mixers can be used together with hydraulically and thermically controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.
• If the water is flowing along the fixture in the direction of the shaft, the spray former must be replaced with a standard air bubbler 13913000.

Technical Data

This mixer series-produced with EcoSmart® (flow limiter)

• Operating pressure: max. 1 MPa
• Recommended operating pressure: 0,1 – 0,5 MPa
• Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
• Hot water temperature: max. 80°C
• Recommended hot water temp.: 65°C

Assembly

Symbol Description

Do not use silicone-containing acetic acid

Dimensions

Flow diagram

1. with EcoSmart®
2. without EcoSmart®

Spare parts

Operation

Cleaning

Test certificate

Hansgrohe · Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com · Internet: www.hansgrohe.com

References

• Taps for bathrooms, showers and kitchens | hansgrohe INT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>