DAYTONAUDIO iMM-6S Calibrated Measurement Microphone User Guide
- June 6, 2024
- DAYTONAUDIO
Table of Contents
DAYTONAUDIO iMM-6S Calibrated Measurement Microphone
Features
- Precision condenser microphone for critical measurement and recording applications
- For use with iOS, Android, and Windows Phone devices via 3.5mm TRRS headset jack
- True omnidirectional pattern with calibrated flat frequency response
- Rugged construction with high-quality components
- Extremely compact; includes sturdy carrying case with foam insert
- Compatible with industry-standard measurement apps
Technical Specifications
- Capsule type: Precision 6 mm electret condenser
- Polar Response: True Omnidirectional
- Frequency Response: 18 Hz–20 kHz (Calibrated)
- Impedance: 200 ohms
- Sensitivity at 1 KHz into 1K ohm: 10mV/Pa (-0dBV, re. 0dB = 1V/Pa)
- Max. SPL for 1% THD @ 1000Hz: 127dB
- S/N Ratio: 70 dB A weighted (varies depending on host device)
- Connector: Gold-plated 3.5mm TRRS
Setup
To set up the iMM-6S for use, verify that the iMM-6S is functioning by attempting to record sound using the host device.
Calibration
To deliver the most accurate results, a calibration file should be loaded into
the software program being used for audio analysis. This calibration file is
generated based on the serial number of our iMM-6S. To obtain your calibration
file in text format (compatible with most audio analysis apps), visit
DaytonAudio.com and navigate to the iMM-6S product page. Enter the serial
number of your iMM-6S, then click on
“Download.”
Support
If you encounter problems of have unanswered questions, please visit the Support page on the Dayton Audio website for support contact information.
5-Year Limited Warranty
See daytonaudio.com for details
daytonaudio.com
tel + 937.743.8248 info@daytonaudio.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>