Sony STR-DE497 AV FM Stereo FM-AM Receiver Easy Setup Guide
- October 30, 2023
- Sony
Table of Contents
Sony STR-DE497 AV FM Stereo FM-AM Receiver
This Easy Setup Guide explains how to connect the DVD player, TV, speakers, and subwoofer so you can enjoy multi-channel surround sound from the DVD player. For details, refer to the operating instructions supplied with the receiver.
Safety Instructions
-
Power Source:
Ensure that the receiver is connected to a power source that meets the voltage and frequency requirements specified on the rear panel or in the user manual. Use only the supplied power cord or an authorized replacement to avoid electrical hazards. -
Ventilation:
To prevent overheating, maintain adequate ventilation around the receiver. Place the receiver in a well-ventilated area, ensuring that there is sufficient space around it to allow heat dissipation. Do not block the ventilation openings on the unit. -
Liquid and Moisture:
Keep the receiver away from liquids and moisture. Do not expose it to rain, water, or excessive humidity, as it can cause electrical shorts, damage the internal components, or result in an electric shock. -
Cleaning:
When cleaning the receiver, disconnect the power cord and use a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners, as they can damage the device. -
Avoid Obstructions:
Do not place the receiver on soft surfaces, such as a bed or sofa, or on unstable surfaces. Ensure that there are no objects blocking the ventilation openings or falling onto the receiver. -
Lightning Protection:
To protect the receiver from power surges caused by lightning strikes or electrical storms, unplug the power cord during thunderstorms or when the receiver will not be used for an extended period. -
Servicing:
For any servicing or repair needs, contact authorized Sony service centers or qualified personnel. Do not attempt to disassemble or repair the receiver yourself, as it may result in electric shock or void the warranty. -
Speaker Connections:
When connecting speakers, make sure to follow the correct polarity (positive to positive and negative to negative). Incorrect connections can cause distorted sound or damage to the receiver.
Easy Setup Guide for Speaker System
Refer to the illustration at the right for speaker connections (A–F).
Speaker Wire:
The most common way to connect speakers to the Sony STR-DE497 is using speaker wires. The receiver usually has multiple pairs of speaker terminals labeled as “Front,” “Center,” “Surround,” and “Subwoofer.” You will need to connect the positive (+) and negative (-) terminals of each speaker to the corresponding terminals on the receiver. Ensure that you match the polarity correctly to maintain proper sound reproduction.
You can set up the speakers easily by selecting the speaker pattern.
Use the buttons on the receiver for the operation.
- Find your speaker pattern by referring to the illustration on the back page. You can use the flow chart on the back page.
- Press to turn on the system.
- Press MAIN MENU repeatedly to select “
”. - Press < or> repeatedly to select “EASY SET”. If it does not appear, select “NORM. SET” and press + or – to select “EASY SET”.
- Press < or> repeatedly to select “SP. PAT. X–X”.
- Press + or – repeatedly to select your speaker pattern, then press ENTER.
What is your Speaker Pattern?
The speaker pattern depends on the number of speakers you have.
- A Front speaker (L)
- B Front speaker (R)
- C Center speaker
- D Subwoofer
- E Surround speaker (L)
- F Surround speaker (R)
Refer to the illustration at left, follow (yes) if you have the speakers, and follow (no) if you do not.
FAQ’s
How can I reset the Sony STR-DE497 receiver to factory settings?
Can I use the Sony STR-DE497 radio with a subwoofer?
The receiver does indeed include a separate subwoofer output. Subwoofer cables are used to connect the subwoofer to the receiver's SUBWOOFER OUT jack on the back.
What is the Sony STR-DE497 receiver's maximum power output?
The receiver can provide up to 100 watts of power per channel through stereo speakers with an impedance of 8 ohms.
Can I use HDMI to connect my TV to the receiver?
No, there are no HDMI inputs or outputs on the Sony STR-DE497. The majority of the connections are analogue for audio.
Can I play Dolby Digital or DTS surround sound on the receiver?
Yes, Dolby Digital and DTS surround sound formats are supported by the Sony STR-DE497.
Can I use the receiver to listen to FM or AM radio?
The receiver does indeed include an FM/AM tuner. To listen to radio broadcasts, connect an FM or AM antenna to the corresponding antenna connections on the back.
Sony STR-DE497 has how many audio inputs?
Four analogue audio inputs on the receiver allow you to connect things like CD players, DVD players, and gaming consoles.
Can I use the receiver with my iPod or smartphone?
Yes, you can use an audio cable (such as a 3.5mm to RCA cable) to connect your iPod or smartphone to one of the analogue audio inputs on the receiver.
Is there a headphone jack on the receiver?
How do I modify the receiver's input source?
To switch between the numerous input sources, use the remote control or the INPUT SELECTOR buttons on the front panel.
Is the Sony STR-DE497 equipped with a sleep timer?
Yes, you may set a sleep timer on the receiver to switch it off automatically after a certain amount of time. The remote control's SLEEP button can be used to start and stop the timer.
Can I use the receiver to connect more than one pair of speakers?
The receiver does indeed support multiple speaker arrangements. To switch between various speaker arrangements, use the remote control or the SPEAKERS button on the front panel.
Download This PDF Link:Sony STR-DE497 AV FM Stereo FM-AM Receiver Easy Setup Guide
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>