Runyuan ZH706 Smart Humidifier User Manual
- June 4, 2024
- Runyuan
Table of Contents
Runyuan ZH706 Smart Humidifier
Thank you for purchasing our air humidifier, please read this instruction carefully before use, please keep this booklet for future reference.
Product introduction
Ultrasonic technology is a relatively mature technology in the world,it is
widely used in various fields, ultrasonic humidifier adopts ultrasonic high-
frequency oscillation principle,the water is atomized into 1-5 micron
ultrafine particles,the water mist is diffused into the air through the
pneumatic device, so as to achieve the purpose of uniformly humidifying the
air , freshening air, moistening skin, improving health.
Product accessories list
Open the packing carton, please check the carton contains the following accessories.
Specification
Main Features
- Top filling, more convenient;
- Spray fine, lasting up to 13 hours;
- Color changing RGB LED light;
- Smart App function (optional).
- Water shortage protection;
- Three gear mist adjustment;
- Sleep mode;
Safety precautions
In order to ensure safe use,avoid causing you and others to receive injury and property loss,please observe the following safety precautions.
Warning: Indicates the possibility of serious accident or injury;
Attention: Indicates possible product damage.
The following conditions are not considered in this product:
- The use of appliances by unattended children and persons with disabilities;
- The product can not be play by children as a toy;
- .This product is not suitable for people with physical or mental disabilities and lack of necessary experience and knowledge, unless used under the supervision of someone responsible for its security.
Parts
Main engine explosion diagram
Back of product
Panel function
Steps for usage
Steps for filling water
- The humidifier should be placed on a flat surface.
- Open the cover and fill in water, or take up the water tank and take it to the tap to add water
- Note that water must not exceed the maximum water level.
- Cover the tank cover and plug in the power cord.
Attention
- Mist outlet,water filling is forbidden,;
- Can be injected with clean tap water or pure water;
- The water filling position should not exceed the maximum water level.
Operation Steps
- Press repeatedly to switch to the First gear, the Second gear, the Third gear, sleep and shutdown in turn.
- When the machine goes into sleep mode, it will work at the high mode mist output, it will work for 5 minutes, pause for 5 minutes; then work for 5 minutes, pause for 10 minutes; then work for 5 minutes, pause for 15 minutes, work in cycle.
- At the working state, long touch for 3 seconds, the mist indicator light will flash, then enter the RGB light setting mode. Press the key circularly to set 10 RGB light modes(0-9): Gradation(1)-Red (2)-Yellow(3-Light green(4)
- Green(5)-Blue(6)-Dark lue(7)-Purple(8)-White(9)-Off RGB(0)
Smart App Function
- The machine has a built-in Wifi module, and the humidifier can be remotely controled through the Tuya Smart APP control system.
- Download the “Tuya Smart” mobile phone APP and install it on the phone, open the “Tuya Smart” application, and complete the pairing of the smart humidifier according to the mobile phone prompts.
- Note: In order to connect more smoothly, you need to turn on the Bluetooth function of your mobile phone at the same time.
Click on ” ZH706 ” to enter the control interface.
Click “Switch” in the mobile app interface to turn on the machine, and then Click “More” in the mobile App interface into next menu.
In the “More” menu, click the corresponding button remember to click “confirm”) to set the working states of the humidifier.
Cleaning/Maintenance
After appliance is used for a period of time, scale will appear, form
the”‘white powder” phenomenon; it is attached to the surface of the
transducer, affecting the humidification effect. It is necessary to clean the
main components of the humidifier regularly.
-
Add the proper amount of water, and clean the machine with cleaning brush.
-
Wipe the atomizer with a cotton swab stuck with citric acid solution.
-
Please do not use a sharp hard device to touch or concuss the atomizer sheet.
-
Do not use detergent to clean, use clean water is better.
-
Rinse with water and wipe clean with a soft cloth.
-
Remove the upper cover and spray nozzle in turn, wash them with water, and then wipe them with a soft wet cloth.
(It can be washed in water) -
The shell can be wiped with a wet cloth, and then wipe dry with a clean cloth.
Attention
Do not use a cloth with chemical solvent, gasoline, kerosene or polishing
powder to wipe the surface.
When cleaning, don’t let water get into the inside body to avoid the internal
components being wet and malfunctioning.
Instruction of pouring water
Warning
Do not pour water from the direction of the outlet position.
Notices
- This machine is with water tank detection function. When the machine is working, it will stop spraying when taking up the water tank. After the water tank is placed in, the machine will spray again automatically.
- When there is water shortage in the sink, the Mist indicator light will flash, the mist indicator light goes out after 5 seconds.
Attention
- Take up water tank, stop sprayings
- Place in water tank, start sprayıng.
Troubleshooting
If your humidifier does not work properly, please check the following before requesting after-sales service.
FCC Statment
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body