IKEA AA-2138623-7 UPPLYST LED Wall Lamp Instruction Manual

IKEA AA-2138623-7 UPPLYST LED Wall Lamp

Product Information

The product is called UPPLYST and is an electrically operated device that requires a 120VAC Max21mA 60Hz power supply. It is recommended for indoor use only and complies with part 15 of the FCC Rules. The device comes with a cord and transformer that need to be regularly checked for damage. The product should not be used if any part is damaged. The device is not recommended for children under 3 years of age.

The device comes with important safety instructions that need to be followed during handling and use to prevent electric shock. It is important to keep these instructions for future use. Different materials require different types of fittings, always choose screws and plugs that are specially suited to the material. The device must not be modified or changed in any way that is not expressly approved by the party responsible for compliance as it could void the user’s authority to operate the equipment.

Product Usage

1. Make sure the device is plugged into a 120VAC Max21mA 60Hz power supply.
2. Check the cord, transformer, and all other parts for damage before use. If any part is damaged, do not use the product.
3. Use a damp cloth to clean the device, never use a strong cleaning agent.
4. Choose screws and plugs that are specially suited to the material for installation.
5. Keep the device away from children under 3 years of age.
6. Do not modify or change the device in any way that is not expressly approved by the party responsible for compliance.
7. If the device causes interference, try the following: increase the separation between the device and the receiver, connect the device into an outlet on a different circuit from that to which the receiver is connected, or consult the dealer or an experienced radio/TV technician for help.

IMPORTANT

READ CAREFULLY KEEP FOR FUTURE REFERENCE.

CAUTION: ELECTRICALLY OPERATED PRODUCT

• Not recommended for children under 3 years of age. As with all electric products, precautions should be observed during handling and use to prevent electric shock.

Technical information

• 120VAC Max21mA 60Hz

IMPORTANT SAFETY INSTRUCTIONS

• For indoor use only.
• Regularly check the cord, the transformer and all other parts for damage. If any part is damaged the product should not be used.

Important information:  Keep these instructions for future use.

Cleaning

• Use a damp cloth, never a strong cleaning agent.

Fcc Statement

This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions:

1. This device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material.

Tools

Info

Parts

Warning

Installation Instructions

WARNING:  Strangulation hazard.

• NEVER place cord within reach of the child in a crib, playpen or toddler bed.
• ALWAYS secure cord to wall. Check regularly that the cord is securely fastened.
• Pull the cord to remove any slack between switch and both fasteners. Tie up any remaining slack cord between fastener and socket.
• Please see illustration of how to secure cord to wall further on in this document.

Warnings

© Inter IKEA Systems B.V. 2018

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>