inBEKEA A6 Series Wireless Quick Charging Vehicle Holder Instruction Manual
- October 30, 2023
- inBEKEA
Table of Contents
inBEKEA A6 Series Wireless Quick Charging Vehicle Holder
Parameter Description
- Product Name : wireless fast charging vehicle holder (intelligent induction type)
- Power : 15W/10W/7.5W
- Effective transmission distance :0-5mm
- Boundary dimension : 127 mm74mm13mm
- Charging interface : TYPE-C USB
A6-1 Packing List:
- Car bracket 1
- Manualx1,
- Data linex1
- Car outlet base× 1
A6 Packing List:
- Car bracket×1
- Manual×1,
- Data linex1
- Car outlet base×1
- Magnetic head×3(Android,Iphone, Type-C)
Functional components
Specifications
- Color : Black/Silver
- Weight : 123.8g
- Material : ABS/PC+GLASS
- Input voltage / current: 5V / 2a, 9V / 1.67a
- Output power : 15W/10W/7.5W automatic identification
- Rated frequency : 110k-205khz
- Charging distance : 0 – 5mm
- Equipment supporting QC wireless fast charging, such as : HUAWEI P40/P40 Pro/Mate 30/Mate 20/Mate RS/ Iphone14/14 Pro/14 Pro Max/phone 13/13 Pro/ 13 Pro Max/iphone12/12 Pro/12 Pro Max/iphone 11/11 Pro/11 Pro Max/X/iphone XS Max/XR/ iphone8/8P/8 Plus/Samsung Galaxy Note 20/Note 10+ Note 10+5G/Note9/Note8/S20/S10+/S10/S9+/S9/ S8+and other support Wireless charger
Instructions For Use
- Connect the product to the appropriate data cable during use
- Connect the USB end of the data cable to the vehicle interface(e.g. cigarette lighter converter and USB charging interface)
- The base clamp clamps the air outlet of the air conditioner, and can also be placed in other places that can be clamped
- After the equipment is connected with 5 ~ 9V DC power supply, it will automatically check the tension and closing once, The indicator light is on. When the object is 5cm-20cm close to the equipment, it will automaticallySense and open your arms, put in the mobile phone, and the device automatically clamps the mobile phone, At this time, the wireless fast charging will automatically charge the mobile phone (the mobile phone has wireless charging function). When taking out the mobile phone, you need to touch the below right corner of the back, fingers|con sensing area, when the finger touches this position, the device will open automatically Take out your mobile phone with both arms
- The equipment has built-in overvoltage protection, over temperature protection, magnetic field protection and short circuitProtection. In case of abnormality, it will automatically stop working
Precautions
- Do not over squeeze or collide with the equipment
- Do not use it under severe high temperature, humidity or corrosive environmentThis product can avoid damaging the circuit of the equipment
- Wireless charging cannot be carried out without connecting a USB cable for power supply and only using the battery
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure StatementThe antennas used for this transmitter must be installed to provide separation distance of at least 20 cm from all persons and must not beco-located for operating in conjunction with any other antenna ortransmitter. This device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions:(1)This device may not cause harmful interference, and(2)This device must accept any interference received, includinginterference that may cause undesired operation.