ipcPRO IBJ4125U Industrial Fanless Mini PC User Manual

ipcPRO IBJ4125U Industrial Fanless Mini PC User Manual

Product Overview

Dimension

Product specification (Main parameter)

Processor| Intel Celeron 14125 (Quad core quad threading, 2.0GHz, Max turbo2.76Hz)
---|---
RAM| Support 1•DDR4 2400 SODIMM RAM Slot.
Max support 8G8
BIOS| AMI UEFI BIOS
Display Chip| integrated Intel ° UHD Graphics 600
Display Port| 1•HDMI, 26DP (Support synchronous and asynchronous three display.
Max Resolution support 4096×2160 @ 60Hz)
Front I/O| 1Power Switch. 4LISB3.0, 2LIS82.0. 1’COM
Rear I/O| 1DC, 1’HDMI, 2•DP. 2•Ian
1SIM slot. 1’Audio (support Mic and Speaker at the same time)
Expansion Slot| Support 1•M.2 2280 M-key slot (Support SATA)
Support 1sfv1.2 2242 B-key Slot (Support 4G function), embedded lSIM slot
Support 1•14.2 2230 E-key Slot (Support WIFI. Bluetooth Optional)
Optional expansion function: TPM Pin (Support TPM 1.2 / 2.0 security module) . lCOM ( (Standard version doesn’t have these function)
Network| 210/100/1000M RTL8111H LAN
Network| 1*M.2 2280 slot. Onboard 11‘2.5″ SATA HOD
Input Voltage| Support DC 12V Input
Other Function| Auto power on when there is electricity. Timing boot. Wake on LAN.. PXE boot
Work Temp| +WC (Commercial HOD) . -20″C — +for ( industrial SSD)
Work Humidity| 0% – 95% non-condensing
Dimension| 144′ 126.5 • 42 mm
Application| 0.8 kg

Device Connection

Steps of connect the device to the power supply| Diagrammatic drawing
---|---
Connect DC 12V power adapter to the power input port 1, then press the front panel power switch button, PC start with blue power LED on|

Warning:
The on/off button signal will not cut off the PC power!

Warning:
Long press the power switch for 4 seconds to turn off the pc, you need to turn off the power, then it can be turned on normally.

| 1| Power Switch
2| 4+USB 3.0
3| 2+USB 3.0
4| 1+com
Front Plate| NO| Port Name
---|---|---
| 1 and 9| Antenna hole
2| DC 12V
3| HDMI
4| DP1
5| DP2
6| SIM
7| 2+100M lAN
8| Audio

Remark:

1. HDMI Max Resolution: 4096×2160@30Hz;
2. DP1 Max Resolution: 4096×2160@60Hz;
3. DP2 Max Resolution: 4096×2160@60Hz:
   (Can’t support Audio and Can’t support hot plug in or hot plug off)

Internal expansion ports

Status indicator LED

BIOS Settings

Boot up the pc, then press “DELETE” to enter the BOIS setting or Boot up the pc, then press “F11” to open Boo manager to enter the BOIS setting.

Choose “Advanced” → “System power Management” → “Restore On AC Power Loss” → “Power On” See picture as below.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>