EaseTec EK2030 Wireless Keyboard and Mouse Instruction Manual
- October 30, 2023
- EaseTec
Table of Contents
EaseTec EK2030 Wireless Keyboard and Mouse
Product Information
- The device complies with part 15 of the FCC Rules.
- The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
- Minimum distance of 0cm should be maintained between the radiator and your body.
Product Usage Instructions
- Do not make any changes or modifications to the device that are not explicitly approved by the manufacturer as it could void your authority to operate the equipment.
- Ensure that the device is operated in a way that does not cause harmful interference to other devices.
- The device should accept any interference received, including interference that may cause undesired operation.
- When installing and operating the equipment, ensure that there is a minimum distance of 0cm between the radiator and your body.
Caution: Please read and follow all instructions provided in the user
manual before operating the equipment.
Thank you for your support, in order to enable you to further understand this
wireless keyboard and mouse. Please read this manual carefully before using
the set!
Package contents
Wireless keyboard ………… ……………………………………. 1 PCS
Wireless mouse ………………………………………………… 1 PCS
receiver …………………………………………….. 1 PCS
Instruction manual (including warranty card) ……… 1 PCS
Product installation instructions
-
Remove the USB receiver from the bottom of the mouse and plug it into the USB port on the computer.
-
Open the battery cover at the bottom of the mouse and put an AA(No.5) battery into the battery compartment
(Note that the positive and negative polarity of the battery must be correct.) Cover the battery. -
Open the battery cover at the bottom of the keyboard and put the two AAA(No.7) batteries into the battery compartment(Note that the battery positive and negative polarity must be correct), cover the battery cover, the upper right corner of the keyboard. Toggle switch toggle to ON.
-
You can also load the USB receiver into the bottom of the mouse when you go out and do not use it In the receiver slot.
Product description
- Small digit switch indicator
- Case switch indicator
- Low power and wireless connection indicator
Wireless mouse -NANO receiver
Warranty term
The equipment is provided with a limited product hardware warranty service for 1 year from the date of purchase.
Security reminder
Please do not open or repair the equipment. Please do not use the equipment in a wet environment. Please wipe the equipment using the dry cloth.
Warranty restrictions
The limited warranty doesn’t cover the problems or damages due to the following causes: (1) Accidents, misuse, improper operation, or any unauthorized maintenance, modification or dismantling;
- Improper operation or maintenance, violation of the product description during the application or improper connection of voltage source;
Compensation
- In case of quality problems within 7 days, according to the “three guarantees” stipulated by the country, the hardware will be returned to the purchase place under the intact appearance and packaging of the product, and the payment for the bought hardware will be returned when presenting the valid voucher for purchase.
- In case of quality problems within 60 days, the hardware product can be replaced at the purchase place or repaired at the specified repairing block, and the expiration date of the replaced hardware is the remaining days.
- In case of quality problems within 1 year, the product can be repaired at the specified repairing block.
Shenzhen Hxss Technology Co.,Ltd.
Add: 609 , c Building , minle Technology Area, minzhi Street, longhua
Disrtict, Shenzhen, Guangdong , Province, China
Tel (fax): 0755-23744139
warranty period|
---|---
Date of purchase|
Whereto buy|
Product
Serial Number
|
Product Number|
stamp|
date| Maintenance situation
---|---
|
|
|
|
|
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is c connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>