TAIFOND WSFSL001 Ceiling Fan Installation Guide

TAIFOND WSFSL001 Ceiling Fan

CAUTION
Read instructions carefully for safe installation and fan operation.

Safety Rules

To avoid the risk of electric shock, personal injury, or fire, please carefully follow the rules bellowed:

1. Turn off the electricity to the fan at the main fuse box or circuit panel at the beginning.
2. All wiring must be in accordance with the local electrical codes or National Electrical Code
3. please use gloves when handling fan parts that have sharp edges.
4. Made sure the site you choose to install has enough space for the blades to rotate, meaning that at least 7 feet (2.13 meters) from the floor to the fan blades, 18 inches(45.72 centimeters) from the end of the blade to the wall or other upright structures.
5. Please only mount the fan to an outlet box which marked acceptable for the fan and use mounting screws which compatible with the outlet box.
6. The outlet box and ceiling support structure must be securely mounted and capable of supporting at least 45KGs.
7. Be cautious when working around or cleaning the fan
8. Do not clean the fan or fan blades with water or detergents. A dry cloth or lightly dampened cloth with being recommended
9. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.
10. Electrical diagrams are for reference only.
11. The fan is only for indoor use and outdoor places with a ceiling.

Tools Required

Are parts missing or damaged?
Don’t need to return to the store. Just contact us via email, We will help you solve the problem as soon as possible.
[email protected] (NA Market)
[email protected] (EU Market)

Mention
This ceiling fan can’t be gradually dimmed, DO NOT use any Dimmer Switch for this!!!

Package Content

1. Mounting Bracket ×1
2. Down Rod ×2
3. Canopy x1
4. Yoke Cover x1
5. Fan Module x1
6. Long Screw Rod x1
7.  Small Screw Nut ×3
8. Tube x1
9. Tube Cover x1
10. Bulb Socket x1
11. Long Screw Nut x1
12. Medium Screw Rod x1
13. Bulb Socket Cover x1
14. Hand Screw Nut x1
15. Short Screw Rod x1
16. Shade x1
17. Decorated Screw Nut x1
18. Receiver x1
19. Wire Nuts ×5
20. Expansion Screw x2
21. Tapping Screw ×4
22. Remote x1

Install The Mounting Bracket

To Prevent Personal Injury and Damage, Ensure That the Hanging Location Allows the Blade a Clearance of 7 Feet(2.13Meters) From the FLoor and 18 Inches(45.72 Centimeters)From any Wall or Obstruction.

For the concrete ceiling:

1. Turn the 0Power OFF From the Electrical Fan Light Before Installation.
2. Mark the right sign on the ceiling with a Pencil and Mounting Bracket(Fig.1).
3. Drill 06mm holes at the marked places, and Knocked the Expansion Screws in(Fig.2)
4. Finally, Install the Mounting Bracket and Lock the Expansion Screw. (Fig.3)

For the Wood Ceiling:

Mark the location for the ceiling fan first, and secure the mounting bracket to the building structure with four wood screws provided.
NOTE: Hanger after the installation must be able to withstand the weight of 45kgs or more.

Assemble the Down Rod

1. Remove the DownRod Clip & Down Rod pin from the download and loosen the set screws in the yoke(Fig.4)
2. Feed the fan wires through the yoke cover, canopy, and down-rod (Fig.5)
3. Slide the download into the yoke of the motor assembly. Align holes and reinstall the download pin and download the clip and secure it with the two set screws. (Fig.6)

Assemble Bulb Socket

1. Insert the wire Through Long Screw Rod, Small Screw Nut, Tube, Tube Cover, and Bulb Socket, Then assemble to the fan Module(@ 234©).
2. Insert the Wire Through a Long Screw Nut, and Connect the Wire With an electric Tape, Then Assemble a Short Screw Rod, Small Screw Nut, Bulb Socket Cover, and Small Screw Nut 6 1 8 0 101 Q2).

Install Bulbs and Shade

Install LED Bulbs to the E26 Bulb Socket as Shown in(Fig.8)
Screw off the Four Shade Screws (Fig.9).
NOTE: The Max Wattage of Each Bulb is 60W(Bulbs not Included.)
Install the Decorated Screw Nut on the Shade and Fix the Shade on the Fan module With Four Screws(Fig.10).

Install the ball end of the download into the opening of the mounting bracket (Fig.11).
WARNING: Failure to align the slot in the ball with the tap on the mounting bracket may cause the fan to fall, which could result in injury or death.

Connect Remote Receiver Wire

Be sure to do this after a power outage Strictly follow the picture of linking wires.

1. Connect the house cable to the remote receiver, as shown in Fig.12 Connect using By wire nut (included).
2. Connect the motor to the remote receiver as shown in Fig.13, Connect using By wire nut (included).
3. Once the wiring step has been completed, slide the wired remote receiver in between the mounting bracket and the top of the download ball.

Install the Canopy

Raise the canopy up and align the keyholes o the bottom of the canopy with the screws -s on the bottom of the mounting bracket. Rotate the canopy until both screws from the mount-in bracket drop into the slot recesses. Tighten screws securely.

Instructions for the use of fans and lamps
Be sure to check and confirm that the whole installation process conforms to the specifications shown in the instruction manual, and strictly follow the instructions to install and connect cables. Then power on using the remote control using the fan lamp

Remote Control Instructions

Troubleshooting Guide

If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly or wiring. In some cases, these installation errors may be regarded as defects of the LED ceiling fan. If you experience any faults, please check this Trouble Shooting Guide. If the problem cannot be solved, please consult with your authorized electrician and please feel free to contact us.

Before:

1. This is an LED ceiling fan, DO NOT install any dimmer switch for this.
2. Check circuit fuses or breakers and make sure the battery is installed correctly.
3. Check line wire connections to the fan and switch wire connections in the switch housing.
   CAUTION : Make sure the main power is off.

Problem: The fan doesn’t work

• Make sure the power switch is on.
• Check the circuit breaker to ensure the power is turned on.
• Make sure the blades spin freely.
• Turn off the power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram.

Problem: Excessive Wobbling

• Make sure the blades are properly installed on the blade iron posts.
• Turn the power off, support the fan carefully, and check that the hanger for the ball is properly seated.
• Use the provided balancing kit and instructions to balance the fan.

Problem: Noisy Operation
Make sure that the Housing Voltage and Frequently is 120V/60Hz.

• Carefully check if the motor has a scrap iron.

Problem: Remote Control of the Fan is Erratic

• Make sure the battery is installed correctly.
• Install a fresh battery.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>