etmpacific ETM 770 Cellular Signal Analyzer User Guide
- October 30, 2023
- etmpacific
Table of Contents
etmpacific ETM 770 Cellular Signal Analyzer User Guide
Welcome to your ETM Product
Get started: This guide helps with initial product setup. Need more?
Find additional product information by simply scanning the QR code.
Support : ETM offers multiple support options to help you get the most
out of your product. You can go onto etmpacific.com.au or e-mail
support@etmpacific.com.au.
If urgent, please call us using the numbers below
ETM Pacific Pty Ltd (APAC)
Suite 20, 273 Alfred Street,
North Sydney NSW 2060, Australia
Tel: +61 (0)2 9956 7377 E-mail:
sales@etmpacific.com.au
www.etmpacific.com.au
INTRODUCTION
ETM770 is a handheld signal analyzer for cellular 2G/3G/4G or 2G/Cat M1/Cat NB2 network measurements.
Common applications include:
- Determine the best operator
- Check signal strength & coverage
- Send measured data to server
- Check working IP connection
- Select the best antenna
- Check parameters like Lac, cell
FEATURES
- 2G/3G/4G or 2G/LTE Cat M1/LTE Cat NB2 coverage
- Monochrome OLED display
- Rechargeable battery
- Mini USB for programming and charging
- Includes antenna, hard case and charger
NETWORK COVERAGE
ACCESSORIES
WANT A VIDEO USER GUIDE?
There is an ETM770 user guide available on
Youtube, use the link or scan the QR code to watch:
https://youtu.be/1PLVtn6GDLs
Getting Started
Using the ETM770
1. SCANNING A SIGNAL
2. ADDITIONAL FUNCTIONS
SEND DATA TO SERVER
- Navigate main menu > Send Data to Server > Send Last Scan
- To change the IP-Address for sending, please see ”4. Configuring the ETM770”
COMMUNICATION TEST
- Navigate main menu > Communication Test > PING ”IP-Adress”
- This will send three tests to the selected server. It shows ”success” or ”fail”. Ping round trip time in milliseconds.
- To change the PING address, please see ”4. Configuring the ETM770”
SIGNAL ANALYSIS EXPLANATION
RSSI (dBm) Recieved Signal Strength Indicator
RSRP (dBm) Reference Signal Recieved Power
RSRQ (dB) Reference Signal Recieved Quality
SINR (dB) Signal to Interference plus Noise Ratio
3. SYSTEM
Device Data
Page 1: SIM card number, software version, hardware number, IMEI number
Page 2: Date/time, internal temperature, supply voltage, battery voltage
Select APN
Select which APN you wish to use for uploading scanned data to a server
Select User/PassW
Some APNs require username/password. Add and select the right user in this
tab.
Server Address
Displays the added server adresses and ports
Restart Device
Restart the device without using the buttons.
4. CONFIGURING THE ETM770
When it comes to configuring the ETM770 there are two options:
- Using the Configuration Tool to configure with a computer via the provided USB Cable. Please see ETM770 User Guide available on our website etmpacific.com.au
- Configuring the unit wirelessly using the SMS commands:
SMS COMMANDS
An easy way to configure the ETM770 unit is by using SMS Commands. Simply send an SMS with the following syntaxes to the device’s cellular number.
Change PING address ET-IP3=”IP Address”:”Port”
Example ET-IP3=8.8.8.8:80 (Google’s server)
Change server address ET-IP1=”IP Address”:”Port”
Example ET-IP1=54.77.219.177:7162 (EWO server)
Change APN list ETSAPN=”List position”, ”APN name”
Example ETSAPN=1, m2m.tele2.com
Change User/password ETSUP=”List position”, ”Username”, ”Password”
Example ETSUP=1,username1,password1
4. CellNET
- Log in using the provided login credentials
- Manage your account, units and organisation in the settings.
- Under settings > configuration choose which data you want to be presented
- Enjoy your ETM product
To access the ETM IoT Cloud Dashboard, please visit the website or scan the QR Code.
ETM PRODUCTS
Documents / Resources
|
etmpacific ETM 770 Cellular Signal
Analyzer
[pdf] User Guide
ETM 770 Cellular Signal Analyzer, ETM 770, Cellular Signal Analyzer, Signal
Analyzer, Analyzer
---|---