SUGIFT SGFT88350 Portable Adjustable Basketball Hoop System Stand Instructions

October 30, 2023
SUGIFT

SUGIFT SGFT88350 Portable Adjustable Basketball Hoop System Stand

SUGIFT-SGFT88350-Portable-Adjustable-Basketball-Hoop-System-Stand-
product

HARDWARE

  1. Short Hex Bolt with Washer ×2

  2. Long Hex Bolt with Washer ×1 SUGIFT-SGFT88350-Portable-Adjustable-Basketball-Hoop-System-Stand-fig-2

  3. Small Hex Bolt with 2 Washers and Nut ×4

  4. Socket Button Head with Washers and Nut ×4
    SUGIFT-SGFT88350-Portable-Adjustable-Basketball-Hoop-System-Stand-
fig-2

  5. Tension Knobs ×2

  6. Hex Key ×1

  7. Spanner ×1SUGIFT-SGFT88350-Portable-Adjustable-Basketball-Hoop-System-Stand-fig-3

COMPONENTS

SUGIFT-SGFT88350-Portable-Adjustable-Basketball-Hoop-System-Stand-
fig-4 SUGIFT-
SGFT88350-Portable-Adjustable-Basketball-Hoop-System-Stand-
fig-5

ASSEMBLY

  1. To build the first part of this assembly you will need; The Bottom Pole (3) Wheels (6) Base (9) Axle (10) Align one of the Wheels (6) into the slots on the Base (2), using the help of another person take the Bottom Pole (3) and place into the front of the Base. Thread the Axle (10) trough the holes; to the Wheel and through the Bottom Pole and through to the second Wheel.SUGIFT-SGFT88350-Portable-Adjustable-Basketball-Hoop-System-Stand-fig-6

  2. Take both Supports (4) and align the holes up with those on the base, secure the four holes on the base using (D) Bolts. Then secure to the Bottom Pole (3) using (B) BOLTS tightening to secure.

  3. With a person holding the structure fill the Base with either water or sand, to give the structure stability.

  4. Take the Centre Pole (2) and slot over the Bottom Pole (3), ensuring the screw holes are aligned. Secure into place using the 2 (A) bolts, tighten to secure.

  5. To assemble the Backboard and Hoop. Place the plate of the Top Pole (1) on the back of the Backboard (5) and then place the plate of the Hoop (7) into the front slot on the Backboard. Secure all three into place using the 4 Small Hex Bolts (C), tighten to secure.
    NOTE: Ensure the Backboard is between the two metal parts to help with stability.

  6. Take the Net (8) and hook over the loops. Now take the Top Pole assembly and slot onto the Centre Pole, Align the holes on the Top Pole with those on the Centre Pole and insert the 2 Tension Knobs, tighten to secure into place. The height can be adjusted using the Tension Knobs (E) by loosening and adjusting the height of the Top Pole, re-tighten when sufficient height is achieved.
    CAUTION: Only an adult should adjust the height.

    • Min Height – 1.72m
    • Max Height – 2.15m

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

SUGIFT User Manuals

Related Manuals