Jiangmen Boweini Lighting Technology Co Ltd BWN-5846 Bluetooth Keypad User Manual

BWN-5846 Bluetooth Keypad

Bluetooth Keypad Product Information

The Bluetooth Keypad, model BWN-5846, is a wireless numeric keypad that can be connected to devices such as laptops, tablets, and smartphones via Bluetooth technology. The keypad features a 22-key layout with an ergonomic design for comfortable use. It has a built-in rechargeable lithium battery that can be charged via a USB cable.

Product Features:

• Wireless connectivity via Bluetooth technology
• 22-key layout with an ergonomic design
• Built-in rechargeable lithium battery
• Automatically lights up after power on
• Displays time and temperature alternately at intervals of 3 seconds

Bluetooth Keypad Usage Instructions

1. Ensure that the Bluetooth Keypad is charged before use.
2. Turn on the device that you want to connect the keypad to.
3. Press and hold the power button on the keypad until the LED light indicator flashes.
4. On your device, enable Bluetooth and search for available devices.
5. Select “BWN-5846” from the list of available devices.
6. Enter the pairing code “0000” if prompted.
7. Once connected, the LED light indicator on the keypad will stop flashing.
8. The keypad will automatically light up after power on. The time and temperature will be alternately displayed at intervals of 3 seconds.
9. To set the time, press and hold the “Time” button until the hour digits start flashing. Use the “+” and “-” buttons to adjust the hour. Press the “Time” button again to switch to the minute digits, and use the “+” and “-” buttons to adjust the minutes. Press the “Time” button again to save the time setting.

Note: Refer to the user manual for more information on using the Bluetooth Keypad.

Bluetooth Keypad

1. Display will automatically light up after power on. Time and temperature will be alternately displayed at intervals of 3 seconds.

2. Time Setting:
   Press and hold the button to enter calibration mode when time display is on.
   Adjustment to time is available in flashing status of display.
   One touch on the button to adjust the exact clock digit.
   Adjustment to the next digit shall be 3 seconds after the previous one finished.
   All adjustment finished, keep still for 3 seconds to exit the setting mode.

3. Lighting Setting:
   Lights are off by default in power-on state.
   One touch on the button to turn on lights. Touch again to switch to 3 color temperature in order.
   Touch again to turn off lighting after one cycle. The next touch brings the next cycle.
   Press and hold the button to adjust the brightness of lights in random color- temperature mode

4. Bluetooth Connection:
   Bluetooth function will automatically turn on with prompt sound “Bluetooth mode” after power on.
   Bluetooth ID: (JYF-218D). Prompt sound “connected” will ring out after successful connection to Bluetooth.
   Bluetooth function is always available in power-on status. It will not enter hibernation mode even not used for a long time

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>