REVLON RVST2204E Copper Ceramic Dual Plate Straightener Instruction Manual

DOUBLE STRAIGHT
Copper Ceramic Dual Plate Straightener
RVST2204E
Use and Care Instruction Manual

Copper Ceramic Dual Plate Straightener

Copper Ceramic Dual Plate Straightener

KEEP THESE IMPORTANT SAFETY INSTRUCTIONS

Please read all instructions before using this appliance. This appliance is intended for household use only.
These instructions are also available on our website. Please visit www.helenoftroy.com/emea-en/
WARNING: Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
This appliance can be used by children aged from 8 years and above, and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children should be supervised to ensure that they do not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
WARNING: Do not leave the appliance unattended. Do not allow bare skin or the eyes to come into contact with any heated surface on the appliance when in use. Do not place the appliance on any heat-sensitive surfaces when hot or plugged into the mains. Always unplug the appliance when not in use.
WARNING: Do not use this appliance on synthetic hair or wigs.
NOTE: Use on dry hair only.
WARNING: Should this product malfunction, do not attempt to repair it. This appliance has no user-serviceable parts or components.
Copper Ceramic Dual Plate Straightener
Only use this appliance for its intended purpose as described in this manual.
Advanced Copper 3x Ceramic Plates
Ultra-smooth Advanced Copper 3X Ceramic Coating transfers heat fast and helps reduce damage from over-styling with even heat distribution for reduced frizz.
Smart Heat Memory System
State-of-the-art design automatically recalls the last temperature as your preferred heat setting. Colour Fade Control*
Preserves hair colour temperature settings of 200°C or below. Turn the unit on by pressing the ON/OFF Button. Press the + / – symbols button to select your preferred setting. Your straightener will recognize the selected heat temperature the next time the unit is turned on.
Plate-Locking Switch
For easier storage, the plates of the flat iron can be locked together. To engage the locking switch, first turn the appliance off and unplug it. Push the switch up while pressing the handles together to lock the plates. To unlock, press the handles together and push the unlock switch down.
WARNING: DO NOT engage the plate-locking switch during styling, and DO NOT lock the plates onto hair, as serious damage to hair or even injury could result.
Operating The Double Straightener
Straightening and smoothing irons should be used only on clean, dry hair.

• Plug the straightener into an electrical outlet and press On/Off button.

• The Double Straightener automatically sets to 140 °C. Choose your temperature according to your hair type.

• Use the Heat Adjustment Buttons (+/-) to select the heat level best suited to your hair type.

• Allow the appliance at least 30 seconds heating time.
  NOTE: Once temperature is selected, the temperature setting will blink for 30 seconds. Once the temperature becomes solid, the straightener is ready to use.

• When changing temperature settings, you will see temperature flashing until selected temperature is reached.

• For best results, follow the 10 LED Heat Settings guidelines below:

Styling Tips

Separate your hair in up to 5 cm sections.

• Gently place hair between the straightening plates and clamp the straightener down firmly on the hair.
• You will achieve professional results if you work from the scalp to the ends of your hair.
• Once the straightener is heated, slide the iron along the isolated section, making sure the hair is heated and straightened all the way to the ends. The ends will probably require less heat than the hair that grows closer to the scalp.
• For best results, hold ends of hair while smoothing the hair section.
• To remove hair from the flat iron, simply release pressure and allow the hair to gently slip out from the straightening plates.
• The straightening process does not require overlapping; separate each section of hair and work on it as indicated above.
• Allow hair to cool before combing or brushing.
• Repeat the process until you have achieved the look you desire.

IMPORTANT: The high-performance heater in this unit contains an oil-based protective coating that will burn off during the first few minutes of initial use and may emit smoke and/ or an odor. You may also hear a humming noise during use. This is normal and is not a cause for concern.
When storing the straightener, unplug it and allow the appliance to cool completely. Lock plates by following instructions above (PLATE-LOCKING SWITCH). This will conserve space and help protect the appliance when not in use. When ready to use again, slide the locking switch to unlock and open the straightener .
Automatic Shut-Off
Your appliance has an Automatic Shut-off feature. Should you forget to turn off the appliance, it will automatically shut off after one hour.
Automatic Worldwide Dual Voltage
This appliance will automatically adjust to the correct voltage.

FEATURES (See page 1)
A. Cool Tip
B. Four – 12.7 mm Copper Ceramic Plates
C. LED Digital Temperature Display
D. Tangle-free swivel cord
E. Plate locking switch
F. On/off power button
G. Separate ‘+’ & ‘-’ temperature buttons
The appearance of this appliance may differ from the illustration.

Cleaning

Always unplug the appliance from the mains after use and allow it to cool before cleaning. To clean, wipe the appliance and plates with a damp cloth.

References

• EMEA | Helen of Troy

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>