Trevot TD130013OT 1-Light 18.5 in. Black Outdoor Wall Lantern Sconce Instruction Manual

Trevot TD130013OT 1-Light 18.5 in. Black Outdoor Wall Lantern Sconce

HARDWARE CONTENTS(shown actual size)

• ABA
• BBB
• CBC
• DBD
• Print in china

Product PACKAGE CONTENTS

• PART A Fixture
• DESCRIPTION: A
• QUANTITY: 1
• Long monting x 2 screw
• Wire nut x 3
• Long monting x 2 screw
• Mounting plate (Not actual size) x 1

PRODUCT SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING:

PRODUCT PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Times: 25 minnutes Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses. Helpful Tools (not included): Wire strippers, Step ladder.

Customer Service: service@24h-reply.com

ASSEMBLY INSTRUCTIONS

1. Attach the mounting plate (DD) to the outlet box (not included) with the long mounting screws (CC).

   • Hardware Used:
   • CC Long mounting screw x 2
   • DD Mounting plate x 1

2. Strip 3/4 in. of insulation from wire ends. Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire.
   Helpful hint: If necessary, attach copper ground wire to grounded outlet box.

   • Hardware Used:
   • DD Mounting plate x 1
   • CC Long mounting screw x 2

3. Attach wire nuts (BB).Tape wire nuts (BB) and wires together.

   • Hardware Used:
   • BB Wire nut x3

4. Align the 2 screws(AA) through the holes of the back plate, and fix them with screw nuts

   • Hardware Used:
   • AA Long mounting screw x 2
   • DD Mounting plate x 1
   • AA

5. Install light bulb (not included). Use one E26 bulb.

CAUTION:

To avoid any waterproofing problems, please make sure the light fixture fits the mounting surface perfectly installation and use waterproof glue around the canopy for better sealing after installation.

Product Usage Instructions

1. Ensure that all the parts mentioned in the package contents and hardware contents list are present before starting the assembly.
2. Use the required tools and follow the assembly instructions mentioned above to assemble the product.
3. After assembly, ensure that the light fixture fits the mounting surface perfectly. Use waterproof glue around the canopy for better sealing to avoid any waterproofing problems.
4. Install one E26 bulb (not included) in the light fixture.
5. Read and understand the safety information mentioned in the instruction manual before operating or installing the product.

PACKAGE CONTENTS

HARDWARE CONTENTS(shown actual size)

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

• TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker).
• MINIMUM 90°C SUPPLY CONDUCTORS.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Times: 25 minnutes
Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses.
Helpful Tools (not included): Wire strippers, Step ladder.

ASSEMBLY INSTRUCTIONS

1. Attach the mounting plate (DD) to the outlet box (not included) with the long mounting screws (CC).
   Hardware Used
   ****Long mounting screw
   Mounting plate

2. Strip 3/4 in. of insulation from wire ends. Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box.

3. Attach wire nuts (BB).Tape wire nuts (BB) and wires together.
   Hardware Used
   Wire nut

4. Align the 2 screws(AA) through the holes of the back plate, and fix them with screw nuts.
   Hardware Used
   Long mounting screw
   Mounting plate
   

5. Install light bulb (not included). Use one E26 bulb.

CAUTION: To avoid any waterproofing problems, please make sure the light fixture fits the mounting surface perfectly installation and use waterproof glue around the canopy for better sealing after installation.

Customer Service: service@24h-reply.com

References

• Digital Services, Technology and Consulting | Reply

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>