tibuta E200 Tablet User Manual
- October 30, 2023
- tibuta
Table of Contents
E200 Tablet User Manual
E200 Tablet
1.Attention:
Please don’t be in high temperature, moisture or very dust place Avoid fall
or Violent collision of the device, don’t make the display screen were violent
tremor, this could cause display screen abnormal or damage. please charge in
the following condition,
A.The battery power icons show have no power
B.The system automatically shut off, startup after power off soon
C. Operation buttons no response
D. The device on the top right corner show red icons When the device in the
format or ongoing upload and download file, please don’t suddenly disconnect,
this could cause application error.
Don’t disassemble the product, don’t use alcohol、Thinner or benzene to
scrubbing products
Main function
- Operation systems: Androidng 12
- Processor: MTK 8183
- CPU processor speed: 64-Bit Octa 4 Cortex-A73 + 4 Cortex-A53 2.06Hz
- EMMC: 64GB
- RAM:4GB
- WI-FI Function:802.11b/g/n/ac
- Bluetooth: 4.2
- Micro SD card: up to 512GB
- Display screen: 10.1 inch Capacitive multi-touch
- Resolution: 800.1280 IPS
- Dual camera: Front:5.0M Pixels; Rear 8.0M Pixels
- Battery and capacity: rechargeable Built-in type polymer battery. 3.85W7000mAh
- USB: 2.0
- G-sensor 3D
- Support Speaker
- Record: built-in microphone
- MIC phone: input
- Video:D1VX4/DIVX5/DIVX6/DIVX HD/XVID/MPEG-4 SP/ASP/MPEG2/HEVC/Sorenson H.263/1-1.263NP9/H.264
- Audio:WAV, MP3, MP2, AAC, AMRNB. AMR-WB, MIDI, Vorbis, APE, AAC-plus vl. AAC-plus v2, FLAC, WMA, ADPCM
- Pictures: JPG, JPEG. BMP, and PNG
- Recording function:Fonnat supported: 3ga Format
- 3G function: Support external 3G USB-DONGLE wireless network
- E-book Function:Fonnat Supported: TXT.EPUB.PDF.WORD.EXCEL,PPT
- Working temperature:-5 40 °C
- Languages:Chinese. English. Japanese. French. German. Spanish. Russian, etc.
- The company reserves the right to improve product. products specification and design have any change. and the information is subject to changes without prior notice.
Appearance and button:
- TYPE-C
- Power Button
- Volume buttons
- Micro SD Card
- Reset Button
- Rear Camera
- Headphone jack
- Speakers
First use
4.1 Battery management and charge
Before first use, please charge the device’s battery to 100%.
The first two times charging please keep it charging for about 6 hours, after
that you just need leave it charging 4 hours or until fully charged.
Attention: This tablet uses Built-in type polymer battery, Charge must be to
choose standard adaptor（Adaptor: power supply: DC 5V 2A, adaptor technical
data: input AC100-240V,50/60Hz, DC5V 2A)
4.2 Connection with PC
Use USB cable to connect the PC. First turn on the device; next, click USB
connection window on the notification bar; lastly, turn on Transfer Files to
connect to PC
Into the load mode,
you can copy; delete the file on the device and the file on the memory card.
Equipment operation interface
5.1 Main interface describe
After startup will enter the main interface, In the main interface, you can
Management the main interface software icons by:
a) long press the icons for 3 seconds; after the icon will get bigger,
allowing you to drag it anywhere in the interface.
b) Delete icons: long press the icon for 3 seconds; after, drag the icons to
the Recycle Bin icon. Once it becomes red, Let go of the icon and app will be
deleted.
c) To change wallpaper,Please enter “Settings” > “Display” > “Wallpapers ”
5.2 status bar
describe
Top right displays the battery, battery charge icons, current time, Settings
Menu
5.3 Use touch panel
No matter which interface you are in, you can go back to main screen by
pressing the soft key on the bottom middle corner of the main screen. In
different applications, by tapping the back soft key on the bottom middle
corner on the touch screen, you can return to its previous interface
Equipment Basic Setting:
Click setting icons to enter the setting Interfaces.
6.1 Sound Volume
6.2 Application
Manage applications
A、Enter “Settings” >
”Apps & Notifications” And then there will be App list
B、Select the one you want to uninstall, it will enter the following interface
C、Click Uninstall, then you can delete the application
6.3 Reset Options
Please enter “Settings” > “System” > “Reset Options”> “Erase all data
6.4 Storage
Remove SD card ，to view of the available storage space
【Remark】: please touch option” delete SD card”, so that can
safety to remove SD card
6.5 Language & keyboard
Setting: (Language), text input and automatic error correction options;
Select Language: 54
kind of national languages are available
6.6 Date & time setting
Set date, set time, select time zone and select date format 
6.7 About Tablet
Please enter “Setting” > “System”>“About Tablet”
File Manager
This Tablet can support Android APP in market by third party, most Apps can
install in the network, can copy to NAND FLASH or SD card.
Click “Files Go” APP to open, then you can check Apps, Images, Videos, Audio
and Documents. 
Problem solution
8.1 Device can’t open
A、Check the battery power
B、Connect adaptor first, then check again
C、Press the “reset” key first, the press “power” key
D、After charging then can’t to open, please contact with the supplier
8.2 Device shut down after start up
After startup the screen or the Power On Image appears, the device appear
shutdown: Power is not enough, please charge
8.3 Headset can’t hear the voic e
A、 Please check the volume whether set to 0
B、 Check if the music file is damaged. Try playing another audio file.
C 、If the file has been damaged it may lead to serious noise or popping
sounds.
8.4 Can’t copy file or play music, etc.…
A、Please check if the computer and device are correct connected
B、check if the memory storage space is full
C、check if the USB cable is good or not
D、USB connection is disconnected
8.5 Forget the password!
A、Hold down the POWER and Volume “-” keys simultaneously for 5-8 seconds.
B、Release the volume key when the machine appears in factory mode, then
continue to use the volume reduction key to select “Clear eMMC”, and use the
on key to confirm.
C、Wait about one minute for the welcome screen to appear, and then re-enter
the Android system.
WARRANTY CARD
Model Name…………………………..
Product Serial No……………………
Date of purchase.
Customer’s Details……………….
Namp………………………………………
Address in full………………………
Telephone No…………………………….
Dealer Name & Address………………
Customer’s signature & Date………………….
Dealer’s signature with rubber stamp…………..
Warning
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may
cause undesired operation of the device.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
FCC ID:2AXUI-E200
Warning:
- Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
- CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BYAN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDINGTO THE INSTRUCTIONS.
- The product shall only be connected to a USB interface of version USB2.0.
- Adapter shall be installed near the equipment and shall be easily accessible.
- Operation temperture:- 10-40C
- The plug considered as disconnect device of adapter.
- The device complies with RF specifications when the device used at 5mm from your body, The device is in compliance with the requirements.
This information has to be presented in such a way that the user can readily
understand it.
Typically, this will necessitate translation into every local language
(required by national consumer laws) of the markets where the equipment is
intended to be sold. Illustrations, pictograms and using international
abbreviations for country names may help reduce the need for translation.
Restrictions in the 5 GHz band:
According to Directive SI 2017/1206, the packaging showsthat this radio
equipment will be subject to some restrictions when placed on the market in
Belgium (BE), Bulgaria (BG), the Czech Republic (CZ),Denmark (DK), Germany
(DE), Estonia (EE), Ireland (IE), Greece (EL), Spain(ES), France (FR), Croatia
(HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania(LT), Luxembourg (LU),
Hungary (HU), Malta (MT), Netherlands (NL), Austria(AT),Poland (PL), Portugal
(PT), Romania (RO), Slovenia (SI), Slovakia (SK),Finland (FI), Sweden (SE),
the Turkey (TR), Norway(NO), Switzerland (CH), Iceland (IS), and Liechtenstein
(LI).
The WLAN function for this device is restricted to indoor use only when
operating in the 5150 to 5350 MHz frequency range.
| AT| BE| BG| HR| CY| CZ| DK
---|---|---|---|---|---|---|---
EE| Fl| FR| DE| EL| HU| IE
IT| LV| LT| LU| MT| NL| PL
PT| RO| SK| SI| ES| SE| UK
UK Declaration of Conformity We,
CHITECH SHENZHEN TECHNOLOGY CO.,LTD (101, NO.48, Xiashijia Road, Gongming
Town, Guangming Dist., Shenzhen, China) hereby declares that this Tablet PC is
in compliance with the essential requirements and other relevant provisions of
Directive SI 2017/1206.
According to Directive SI 2017/1206, the Tablet PC can be used in Great
Britain (England, Wales and Scotland) but with restriction.
Designed by Tibuta,Assembled in PRC
CONTACT INFORMATION
https://facebook.com/qr?id=100076315748473
alllinkluck@outlook.com
www.tibutapad.com
Company: UK CROSSBORDER LIMITED
Address: 7 Bell Yard London WC2A 2JR,UK
Mail: uk-crossborder@outlook.com
Manufacturer CHITECH SHENZHEN TECHNOLOGY CO.,LTD
Address:101,NO.48,Xiashijia Road,Gongming Town,Guangming Dist.,Shenzhen,China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>