IKEA FLI454341 TVÄTTAD Integrated Washing Machine Instructions
- October 30, 2023
- Ikea
Table of Contents
- IKEA FLI454341 TVÄTTAD Integrated Washing Machine
- Installation
- Technical data
- Appliance overview
- Inspection check list
- Control panel description
- Daily use
- Hints and tips
- Alarm Codes and Possible failures
- Consumption values
- IKEA guarantee
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
IKEA FLI454341 TVÄTTAD Integrated Washing Machine
Installation
Warning: Read the safety booklet and refer to assembly instruction. The manufacturer does not accept any responsibility for damage or injury through failure to comply with the safety precaution.
- Make sure that all transit bolts are removed.
- Make sure that hoses and cable are correctly connected.
- At the end of installation you can connect the mains plug to the mains socket. Connect the appliance to an earthed socket. The rating plate and the ‘Technical Data’ chapter indicate the necessary electrical ratings. Make sure that they are compatible with the mains power supply. Check that your domestic electrical installation can take the maximum load required, also taking into account any other appliances in use. For any electrical work required to install this appliance, contact our Authorised Service Centre. The manufacturer does not accept any responsibility for damage or injury through failure to comply with the above safety precaution.
Warning: Do not install the appliance as free standing.
Technical data
Product type | Built in – Washing Machine |
---|---|
Dimensions | Width (cm) |
Height (cm) | 81.9 |
Total depth (cm) | 55.3 |
Water supply pressure1) | Minimum |
--- | --- |
Maximum | 10 bar (1,0 MPa) |
- If the pressure in your area is lower or higher, please contact your Authorised Service Centre.
Important: Information on the electrical connection, voltage and overall power is given on the rating plate, on the inner edge of the appliance door.
Appliance overview
- Detergent dispenser drawer
- Control panel
- Door handle
- Rating plate
- Drain pump filter
- Front feet for levelling the appliance
- Drain hose
- Inlet hose connection
- Mains cable
- Back feet for levelling the appliance
- Transit bolts
Rating plate position
The data in the following drawing are indicative only. Please check the rating plate of your appliance.
Inspection check list
Warning: Refer to Safety chapters. Please follow the inspection check list before using your appliance.
Topics| If the answer is YES , no
action is needed
| If the answer is NO, please
---|---|---
All transit bolts are removed.| | Refer to assembly instruction.
The appliance is built in the furniture following the as‐ sembly instructions.
It is NOT positioned free-standings.| | Install it in the furniture as
required. Refer to assembly instruction.
Open and close the deter‐ gent dispenser drawer: no collision with furniture.|
| Refer to ‘Filling the detergent and additives’ section.
Drain hose correctly connec‐ ted to the drainage.| | Refer to hoses connection
description in the assembly instruction.
No water leakage around the hose connections.| | Refer to water connection
warning in the assembly in‐ struction.
The appliance is connected to an earthed socket.| | Refer to ‘Electrical
connec‐ tion’ section.
The appliance is stable and levelled properly.| | Refer to ‘Installation’
section.
Hoses and mains cable are not kinked.| | Refer to ‘Electrical connec‐ tion’
and ‘Water connection’ section.
There is no carpet under the appliance.| | Remove the carpet.
Please write down the product model name, article number and serial number here below that you find in the rating plate and attach your receipt to this page.
Control panel description
Important: The options/functions are not available with all washing programmes and an option/function can exclude another one, in these case the appliance doesn’t allow an incompatible setting.
-
On/Off button
Press this button for a few seconds to activate or deactivate the appliance. Two different tunes sound while switching the appliance on or off. -
Programme knob
-
Turn the selector knob to select the desired programme.
-
Eco 40-60 : Maximum load 8.0 kg. White cotton and fast-coloured cotton. Normally soiled items.
-
For EU: According to Commission Regulation EU 2019/2023, this programme at 40 °C is able to clean normally soiled cotton laundry declared to be washable at 40 °C or 60 \°C, together in the same cycle.
Important: For the reached temperature in the laundry, the programme duration and other data, please refer to ‘Consumption Values’ chapter. The most efficient programmes in terms of energy consumption are generally those that perform at lower temperatures and longer duration. -
For Non EU: According to UK Ecodesign for EnergyRelated Products and Energy Information Regulations, this programme at 40 °C is able to clean normally soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same cycle.
Important: For the reached temperature in the laundry, the programme duration and other data, please refer to ‘Consumption Values’ chapter. The most efficient programmes in terms of energy consumption are generally those that perform at lower temperatures and longer duration. -
Cottons: Maximum load 8.0 kg. White cotton and coloured cotton.
-
Synthetics: Maximum load 3.0 kg. Synthetic items or mixed fabric items.
-
Delicate: Maximum load 2.0 kg. Delicate fabrics such as acrylics, viscose, polyester items.
-
Steam: Maximum load 1.0 kg. Cotton and synthetic items. This programme reduces creases, odours and relaxes the fibres. Do not use any detergent!
-
Mixed : Maximum load 3.0 kg. Synthetic fabrics like polyester, polyamide and their blends.
-
Spin/Drain: Maximum load 8.0 kg. To spin the laundry and to drain the water in the drum. All fabrics, except woollens and delicate fabrics. If you set the No Spin option, the appliance performs draining only.
-
Rinse: Maximum load 8.0 kg. All fabrics, except woollens and very delicate fabrics. Programme for rinsing and spinning.
-
Machine clean: Empty drum. Maintenance cycle for drum cleaning. Pour a cup of chlorine bleach or a washing machine cleaner in the washing phase compartment. After the drum cleaning, run a further rinse cycle with empty drum and no detergent to remove any residue of bleach.
-
Sport: Maximum load 3.0 kg. Sportswear.
-
Denim: Maximum load 3.0 kg. Denim clothing.
-
Express care: Maximum load 3.0 kg. Synthetic items or mixed fabric items.
-
Wool: Maximum load 1.5 kg. Machine washable wool, hand washable wool and other fabrics with «hand washing» care symbol.
-
20 minutes/3kg: Maximum load 3.0 kg. Cotton and synthetic items lightly soiled or worn only once.
-
-
Display
- Door locked indicator:
- Indicator on: the door cannot be opened. The appliance is working or has stopped with water left in the tub.
- Indicator off: the door can be opened. The programme is finished or the water has been emptied out.
- Delay start indicator.
- The digital indicator can show: reset position (—) ( duration (e. g. 2:40 ); programme ); delay time (e. g. 2h ); cycle end ( ); warning code (e.g. E20 ); error indicator (—).
- FlexTime indicator.
- Anti-stain indicator.
- Extra Rinse indicator.
- Steam phase indicator.
- Add garments indicator. It lights at the beginning of the washing phase, when it is still possible to pause the appliance and add more laundry.
- Child safety lock indicator.
- Machine clean indicator. This is a recommendation to perform the drum cleaning.
- Anti-crease phase indicator.
-
Delay Start
With this option you can delay the start of a program in a more convenient time. -
FlexTime
With this option reduces the programme duration depending on the load size and the degree of soiling. When you set a washing programme, the display shows the default duration and the dashes —.- Tap on this button to reduce the programme duration according to the level of garments soil. The display shows the new programme duration and a number of dashes will decrease accordingly. The shortest is the cycle the smallest should be the load.
-
Start/Pause
This button allows you to start or to pause the selected washing programme. -
Anti-stains and permanent Child Lock option
- Touch this button to set the Anti-stains option . This option is designed to remove stubborn stains. Pour the stain remover into PREWASH compartment. NOT selectable with temperature lower than 40 °C.
- Hold pressed this button for 3 seconds to set the Child Lock option . This option prevents children from playing with the control panel: all controls are disabled. To deactivate this option, hold this button pressed for 3 seconds.
-
Extra Rinse
This option increases the number of rinses of the program, minimizing the detergent residuals on the fabrics. Ideal for people with sensitive skin. -
Prewash
This option adds a prewash phase to a washing program. Ideal to remove particulate soil like mud and clay. -
Spin and additional options
When you set a programme, the appliance automatically sets the default spin speed. By means of this button, you can change the default spin speed or set one of the additional spin options:- Rinse Hold. his option stops the cycle after the last rinse. The water is not drained out to prevent fabrics from creasing. The washing programme ends with water in the drum. You must drain the water to unlock the door.
- No Spin . Set this option to deactivate all spin phases. Set this option for very delicate fabrics.
- Quiet Cycle . This option suppresses intermediate and final spin and programme ends with water in the drum. The drum turns regularly to reduce creasing. As the programme is very quiet, it is suitable for use at night time. To finish the cycle perform spin and drain.
The appliance empties the water out automatically after approximately 18 hours.
-
Temperature
When you select a washing programme, the appliance automatically proposes a default temperature. With this option you can change the temperature.
The indicator * = cold water.
Acoustic signals
This appliance has different acoustic signals. To activate/deactivate some of
the acoustic signals when the programme is completed, touch the and the
buttons simultaneously for about 2 seconds. The display shows On or Off.
Daily use
Warning: Read the safety booklet.
Important: Before the very first use, pour 2 litres of water into the
detergent compartment marked by Prewash . Pour 2 litres of water into the
detergent compartment marked
by Prewash . Pour a small quantity of detergent into the compartment marked by
Prewash . Set and start a programme for cotton at the highest temperature
without any laundry in the drum. This removes all possible dirt from the drum
and the tub.
- Make sure that the mains plug is connected to the mains socket.
- Make sure that the water tap is open.
- Load the laundry.
- Pour the detergent and other treatments in the proper compartment of the detergent dispenser.
- Push the On/Off button to switch the appliance on.
- Turn the programme dial to set the desired programme.
- Set the desired options by means of the corresponding touch buttons. The relevant indicator comes on.
- To start the programme, touch the Start/Pause button.
- The appliance starts or, if you have set the Delay Start option, the countdown starts. When programme starts, thanks to the AutoAjust System, the appliance automatically adjusts – in 30 seconds the programme duration to the load to achieve perfect washing results in the minimum possible time.
- At the end of the programme, remove the laundry. If you set an option that ends with water in the tub, drain the water to unlock the drum.
- Push the On/Off button to switch the appliance off.
- Close the water tap.
Important: The Stand-by function may automatically deactivates the appliance to reduce the energy consumption. Press the On/Off button to activate the appliance again.
Hints and tips
- Sort the laundry as follows: white, coloured, synthetics, delicates and wool.
- Follow the washing instructions on the laundry care labels.
- Button up pillowcases, close zippers, hooks and poppers. Tie up belts.
- Turn multilayered fabrics, wool and items with printed illustrations inside out.
- Pre-treat tough stains. With adequate pretreatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature. Do not spray stain remover on garments near the appliance as it is corrosive to the plastic parts.
- Wash heavy soil stains with a special detergent.
- Be careful with curtains. Remove the hooks and put the curtains in a washing bag or pillowcase.
- Use a washing bag to wash small and/or delicate items (e.g. underwired bras, belts, tights, etc. ).
- Avoid washing garments full of long animal hair or poor quality garments releasing lots of fluff that could block the drain circuit and therefore requiring the Service assistance.
- Powder detergents for all types of fabric, excluding delicate. Prefer powder detergents containing bleach for whites and laundry sanitization. At temperature higher than 60 °C the use of powder detergent is recommended.
- Liquid detergents, preferably for low temperature wash programmes (60 °C max) for all types of fabric, or special ones for woollens only.
- The choice and quantity of detergent will depend on: type of fabric (delicates, woolens, cottons, etc), the color of clothes, size of the load, degree of soiling, wash temperature and hardness of the water used. · Follow the instructions that you find on packaging of the detergents or other treatments without exceeding the indicated maximum level ( MAX ).
- Do not mix different types of detergents.
- Use less detergent if washing a small loads, the laundry is lightly soiled or there is large amounts of foam during washing.
- When using detergent tabs or pods, always put them inside the drum, not in the detergent dispenser.
- Normally soiled laundry may be washed without prewash in order to save detergent, water and time (the environment is protected too!).
- Loading the appliance to the maximum capacity indicated for each programmes helps to reduce energy and water consumption.
- To use the correct quantity of detergent, refer to the quantity suggested by the detergent producer and check the water hardness of you domestic system.
- Set the maximum possible spin speed for the selected washing programme before drying your laundry in a tumble dryer. This will save energy during drying!
Alarm Codes and Possible failures
The appliance does not start or it stops during operation. First try to find a
solution to the problem (refer to the tables).
Warning: Deactivate the appliance before carrying out any check.
With some problems, the display shows an alarm code and the Start/Pause button may flash continuously:
Consumption values
Introduction
Important: See the web link www.theenergylabel.eu for detailed information about Energy Label.
- For EU: The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance. It is also possible to find the same information in EPREL using the link https://eprel.ec.europa.eu and the model name and product number that you find on the rating plate of the appliance. Refer to ‘Product description’ chapter for the position of the rating plate.
- For Non EU: The QR code on the energy label supplied with the appliance provides a web link to the product information sheet. Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
Legend
kg | Laundry load. | hh:mm | Programme duration. |
---|---|---|---|
kWh | Energy consumption. | °C | Temperature in the laundry. |
Litres | Water consumption. | rpm | Spin speed. |
% | Remaining moisture at the end of spinning phase. The higher is the |
spin speed, the higher is the noise and the lower is the remaining moisture.
Important: Values and programme duration may differ depending on different conditions (e.g. room temperature, water temperature and pressure, load size and type of laundry, supply voltage) and also if you change the default setting of a programme.
For Non EU – According to UK Ecodesign for Energy-Related Products and Energy
Information Regulations
For EU – According to Commission Regulation Eu 2019/2023
Eco 40-60 pro‐ gramme| kg| kWh| Litres|
hh:mm| %| °C| rpm 1)
---|---|---|---|---|---|---|---
Full load| 8.0| 1.300| 58.0| 03:30| 52.00| 43.0| 1351
Half load| 4.0| 0.950| 46.0| 02:40| 52.00| 43.0| 1351
Quarter load| 2.0| 0.500| 35.0| 02:40| 54.00| 33.0| 1351
- Maximum spin speed.
Power consumption in different modes
Off (W) | Stand-by (W) | Delay start (W) |
---|---|---|
0.48 | 0.48 | 4.00 |
Time to Off/Standby mode is 15 minutes maximum.
Common programmes
These values are indicative only.
Programme| kg| kWh| Litres| hh:mm| %| °C|
rpm 1)
---|---|---|---|---|---|---|---
Cottons 2)
90°C
| 8.0| 2.200| 85.0| 03:55| 52.00| 85.0| 1400
Cottons 60°C| 8.0| 1.500| 80.0| 03:20| 52.00| 55.0| 1400
Cottons 3)
20°C
| 8.0| 0.350| 80.0| 02:35| 52.00| 20.0| 1400
Synthetics 40°C| 3.0| 0.750| 75.0| 02:10| 35.00| 40.0| 1200
Delicate 4)
30°C
| 2.0| 0.300| 50.0| 00:50| 35.00| 30.0| 1200
Programme| kg| kWh| Litres| hh:mm| %| °C|
rpm 1)
---|---|---|---|---|---|---|---
Wool 30°C| 1.5| 0.250| 65.0| 01:05| 30.00| 30.0| 1200
- Reference indicator of the spin speed.
- Suitable for washing heavily soiled textiles.
- Suitable for washing lightly soiled cottons, synthetic and mixed fabrics.
- It also performs as quick washing cycle for lightly soiled laundry.
IKEA guarantee
-
How long is the IKEA guarantee valid?
This guarantee is valid for 5 years from the original date of purchase of your appliance at IKEA. The original sales receipt is required as proof of purchase. If service work is carried out under guarantee, this will not extend the guarantee period for the appliance. -
Who will execute the service?
IKEA service provider will provide the service through its own service operations or authorized service partner network. -
What does this guarantee cover?
The guarantee covers faults of the appliance, which have been caused by faulty construction or material faults from the date of purchase from IKEA. This guarantee applies to domestic use only. The exceptions are specified under the headline “What is not covered under this guarantee?” Within the guarantee period, the costs to remedy the fault e.g. repairs, parts, labour and travel will be covered, provided that the appliance is accessible for repair without special expenditure. On these conditions the EU guidelines (Nr. 99/44/EG) and the respective local regulations are applicable. Replaced parts become the property of IKEA. -
What will IKEA do to correct the problem?
IKEA appointed service provider will examine the product and decide, at its sole discretion, if it is covered under this guarantee. If considered covered, IKEA service provider or its authorized service partner through its own service operations, will then, at its sole discretion, either repair the defective product or replace it with the same or a comparable product. -
What is not covered under this guarantee?
- Normal wear and tear.
- Deliberate or negligent damage, damage caused by failure to observe operating instructions, incorrect installation or by connection to the wrong voltage, damage caused by chemical or electro-chemical reaction, rust, corrosion or water damage including but not limited to damage caused by excessive lime in the water supply, damage caused by abnormal environmental conditions.
- Consumable parts including batteries and lamps.
- Non-functional and decorative parts which do not affect normal use of the appliance, including any scratches and possible color differences.
- Accidental damage caused by foreign objects or substances and cleaning or unblocking of filters, drainage systems or soap drawers.
- Damage to the following parts: ceramic glass, accessories, crockery and cutlery baskets, feed and drainage pipes, seals, lamps and lamp covers, screens, knobs, casings and parts of casings. Unless such damages can be proved to have been caused by production faults.
- Cases where no fault could be found during a technician’s visit.
- Repairs not carried out by our appointed service providers and/or an authorized service contractual partner or where nonoriginal parts have been used.
- Repairs caused by installation which is faulty or not according to specification.
- The use of the appliance in a nondomestic environment i.e. professional use.
- Transportation damages. If a customer transports the product to their home or other address, IKEA is not liable for any damage that may occur during transport. However, if IKEA delivers the product to the customer’s delivery address, then damage to the product that occurs during this delivery will be covered by this guarantee.
- Cost for carrying out the initial installation of the IKEA appliance. However, if an IKEA service provider or its authorized service partner repairs or replaces the appliance under the terms of this guarantee, the service provider or its authorized service partner will re-install the repaired appliance or install the replacement, if necessary. This restriction do not apply to fault-free work carried out by a qualified specialist using our original parts in order to adapt the appliance to the technical safety specifications of another EU country.
How country law applies
The IKEA guarantee gives you specific legal rights, which covers or exceed local demands. However these conditions do not limit in any way consumer rights described in the local legislation.
Area of validity
For appliances which are purchased in one EU country and taken to another EU
country, the services will be provided in the framework of the guarantee
conditions normal in the new country. An obligation to carry out services in
the framework of the guarantee exists only if the appliance complies and is
installed in accordance with:
- the technical specifications of the country in which the guarantee claim is made;
- the Assembly Instructions and User Manual Safety Information;
The dedicated After Sales Service for IKEA appliances
Please do not hesitate to contact IKEA After Sales Service to:
- make a service request under this guarantee;
- ask for clarification on installation of the IKEA appliance in the dedicated IKEA kitchen furniture. The service won’t provide clarifications related to:
- the overall IKEA kitchen installation;
- connections to electricity (if machine comes without plug and cable), to water and to gas since they have to be executed by an authorized service engineer.
- ask for clarification on user manual contents and specifications of the IKEA appliance.
To ensure that we provide you with the best assistance, please read carefully the Assembly Instructions and/or the User Manual section of this booklet before contacting us.
Reach us if you need our service
Please refer to the last page of this manual for the full list of IKEA
appointed contacts and relative national phone numbers.
Important
- In order to provide you with a quicker service, we recommend that you use the specific phone numbers listed at the end of this manual. Always refer to the numbers listed in the booklet of the specific appliance you need an assistance for. Before calling us, assure that you have to hand the IKEA article number (8 digit code) and the Serial Number (8 digit code that can be found on the rating plate) for the appliance of which you need our assistance.
- SAVE THE SALES RECEIPT! It is your proof of purchase and required for the guarantee to apply. Note that the receipt reports also the IKEA article name and number (8 digit code) for each of the appliances you have purchased.
Do you need extra help?
For any additional questions not related to After Sales of your appliances,
please contact our nearest IKEA store call centre. We recommend you read the
appliance documentation carefully before contacting us.
To download the full version visit www.ikea.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>