Olle 17 Inch Tall Round Raised Garden Bed Instruction Manual
- October 30, 2023
- Olle
Table of Contents
17 Inch Tall Round Raised Garden Bed
Product Information
Olle Products & Accessories offers a range of raised garden beds including the 17 Tall Round Raised Garden Bed. The kit comes with curved panels, bolts, washers and nuts made of stainless steel, rubber safety edging, and a wrench tool. The metal panels are made of 24 gauge galvanized steel, powder-coated with color and coated with Aluzinc, a zinc-aluminum alloy. This coating provides resistance to different acidic levels found in most garden soils creating a safe and healthy garden environment. The open-bottom metal garden bed allows for drainage and provides access to nutrients at the soil level. The colored powder-coating withAluzinc reflects heat from the sun and protects the plants from root burn. The product is safe to use and outperforms standard wooden, concrete, and plastic beds.
Product Usage Instructions
CAUTION: Please be aware of the sharp edges in the metal panels that may cause injury. The use of protective equipment such as gloves and closed-toe shoes is recommended.
- Identify the parts in the kit, including curved panels (A), bolts, washers, and nuts (B), rubber safety edging (C), and a wrench tool (D).
- Assemble the panels by aligning them and inserting bolts through the holes. Hand-tighten the bolts and use the wrench tool provided and a Phillips head screwdriver to hold the bolt in place on the outside. To speed up the tightening process, you can use a metric number 10mm hand ratchet.
- Repeat step 2 for all panels until you have constructed the raised garden bed.
Olle Products & Accessories
What is in the kit ?
| Part NO. | Description | Qty. | Parts |
|---|---|---|---|
| A | Curved Panels | 6 pcs | |
| B | Bolts, Washers and Nuts (Stainless Steel) | 36 sets | |
| C | Rubber Safety Edging | 1 pc |
D| Wrench Tool (10mm)| 1 pc|
CAUTION: Please be aware of the sharp edges in the metal panels that may cause injury. The use of protective equipment such as gloves and closed-toe shoes is recommended.
Step 1
- Lay out your panels
- Remove the protective film from both sides of the panels prior to assembly.
Step 2
- Assemble two curved panels to start. Put one bolt at the top and bottom of the panel set. Hand-tighten them.
- Continue the same process to complete your garden bed.
- After you have loosely assembled your shape, add the interior bolts on the outside and the washer and nut on the inside.
- Pinch the panels together at the top and finish tightening the nuts from the top to the bottom with the wrench tool provided and a phillips head screwdriver to hold the bolt in place on the outside. To speed up the tightening process, you can use a metric number 10mm hand ratchet.
Step 3
- Slightly pull/stretch the Safety Rubber Capping as you push it onto the top edge of the garden bed and trim off the excess. (You can use the back of the wrench we provide or a screwdriver to slightly open the channel of the rubber edging only at the joints where the panels overlap allowing it to slip over both panels easier.)
FREQUENTLY ASKED QUESTIONS
-
Why are the Olle garden beds open at the bottom?
The open-bottom metal garden beds allow for drainage and the plants will have access to the nutrients at the soil level. -
WILL THE OLLE RAISED BED GARDEN OVERHEAT?
The answer is NO. The colored powder-coating with the Aluzinc reflects the heat from the Sun and protects the plants from root burn. It also maintains a warmer temperature in the winter for a longer gardening season. Our metal raised garden beds outperform standard wooden, concrete and plastic beds. -
GROWING IN THE OLLE RAISED GARDEN BED…IS IT SAFE?
The answer is YES. The Olle Raised Garden Beds are made made from 24 gauge galvanized steel, powder-coated with color and coated with Aluzinc, a zinc- aluminum alloy. The coating provides great resistance to different acidic levels found in most garden soils creating a safe and healthy garden environment.
Email: info@ollegardens.com
Telephone: 1-833-655-3872
Website: www.ollegardens.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>