OLD CAPTAIN YJBT001 Intelligent Wireless Charging Station Installation Guide

OLD CAPTAIN YJBT001 Intelligent Wireless Charging Station

Product Information

This product is a charging station that has wireless charging capabilities, USB ports, and LED lights. It is designed to charge devices wirelessly and through USB ports. However, users should be aware that this product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz.

Product Usage Instructions

1. Plug in the adapter to a power source.
2. If all functions do not work, replace the adapter.
3. If the lights and USB ports work, but the wireless charging does not work, replace the circuit board.
4. If the lights and wireless charging are working, but the USB ports do not work, replace the USB parts.
5. Place your device on the charging station for wireless charging. Ensure that your device is compatible with wireless charging.
6. For charging through USB ports, plug in your device’s charging cable into one of the USB ports on the charging station.
7. When finished using the charging station, unplug the adapter from the power source.

Parts Identification

Not actual size
Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly.

Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly.

Tools reguired(not provided): Phillips screwdriver

Assembly Instructions

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Step 9

Step 10

Warm Tips:
Socket, Plastic Cap, can be assembled both on the left side panel and right side panel for your option

Step 11

Step 12

This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury.

Warning:
Risk of injury to persons – do not place a television on this furniture. This furniture is not approved for use with a television.

Enjoy your smart charging bedside table with light

• White light when pressed once
• Warm light when pressed twice
• color light when pressed three times
• close when pressed four times
• Adjust the brightness of the light when holding down for three seconds
• The phone can be charged in the middle

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please E-mail your request to hecheng88888@outlook.com and have your instructions and parts list ready to provide the model name, part name.

Product Specification

• Input Voltage: DC 5V/ DC 9V/ DC 12V
• Wireless Output: Apple (7.5W), Samsung (10W), HUAWEI (10W), Ml (10W)
• Frequency Range: 112kHz~205kHz

FCC Warning

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISED Canada Statement

IC warning:
This device contains license-exempt transmitters)/receivers)/ that comply with Innovation Science and Economic Development Canada & apos; license-exempt RSS(s). Operation is subject to the following two conditions:

1. this device may not cause interference and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure:
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment; To maintain compliance with IC' RF Exposure guidelines, This equipment should be. installed and operated with a minimum distance of 10cm from the radiator of your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz.

1. After plugging in the adapter, if all functions do not work, you need to replace the adapter
2. After plugging in the adapter, if the lights and USB ports work, the wireless charging does not work, you need to replace the circuit board
3. After plugging in the adapter, if the lights and wireless charging are working, the USB ports do not work, you need to replace the USB parts

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
https://old-captain.com
Date 2022-12-01 Rev. 0002-A.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>