BOSCH SPV2HKX1DR Integrated Dishwasher User Manual
- October 30, 2023
- Bosch
Table of Contents
BOSCH SPV2HKX1DR Integrated Dishwasher
Product Information
The SPV2HKX1DR Dishwasher is a home appliance that is designed to wash and clean dishes, glasses, and cutlery. It comes with several features, including a water softening system, rinse aid system, detergent dispenser, and various baskets for different types of tableware. The dishwasher can be connected to the Home Connect app, which allows users to control the appliance remotely from their smartphones or tablets.
Product Usage Instructions
- Installation and Connection: Before using the dishwasher, it must be installed and connected properly. Refer to section 5 of the user manual for detailed instructions on installing and connecting the appliance. It includes information on the scope of supply, drainage connection, drinking water connection, and electrical connection.
- Familiarising Yourself with Your Appliance: Once the dishwasher is installed, refer to section 6 of the user manual to familiarize yourself with its various features. It includes information on the appliance itself and its controls.
- Programmes: The dishwasher comes with several programmes for different types of tableware. Refer to section 7 of the user manual for detailed information on each programme.
- Additional Functions: The dishwasher also has additional functions, such as a top basket, knife shelf, etagere, bottom basket, and cutlery basket. Refer to section 8 and 9 of the user manual for detailed information on each function.
- Before Using for the First Time: Before using the dishwasher for the first time, perform the initial configuration as described in section 10.1 of the user manual.
- Water Softening System: The dishwasher has a water softening system that needs to be set up based on the water hardness level. Refer to section 11 of the user manual for detailed information on setting up the water softening system.
- Rinse Aid System: The dishwasher has a rinse aid system that needs to be set up based on the user’s preference. Refer to section 12 of the user manual for detailed information on setting up the rinse aid system.
- Detergent: The dishwasher requires detergent to clean the tableware. Refer to section 13 of the user manual for detailed information on suitable and unsuitable detergents, as well as how to add detergent to the appliance.
- Tableware: The dishwasher can cause damage to certain types of tableware, such as glass. Refer to section 14 of the user manual for detailed information on how to properly load tableware into the appliance to avoid damage.
- Disposal: When disposing of the dishwasher, refer to section 20 of the user manual for detailed instructions on how to remove, protect, and transport the appliance, as well as how to dispose of the old appliance.
bMogesyncRtBwehfeorwe-egshlecidcoshoebmtevmneeirnoce.eweycfoooiatumnsnr:d/
Dishwasher
SPV2HKX1DR [en] Information for Use
Connect your dishwasher with Home Connect today!
Get the app
Google Play and the Google Play logo are trademarks of Google LLC. Apple and
the Apple logo are trademarks of Apple Inc.
Scan QR code
en
Futher information and explanations are available online:
Safety
Safety
Observe the following safety instructions. 1.1General information ¡ Read this
instruction manual carefully. ¡ Keep the instruction manual and the product
information safe
for future reference or for the next owner. ¡ Do not connect the appliance if
it has been damaged in transit. 1.2Intended use Only use this appliance: ¡ For
cleaning household tableware. ¡ In private households and in enclosed spaces
in a domestic en-
vironment. ¡ Up to an altitude of 4000 m above sea level. 1.3Restriction on
user group This appliance may be used by children aged 8 or over and by people
who have reduced physical, sensory or mental abilities or inadequate
experience and/or knowledge, provided that they are supervised or have been
instructed on how to use the appliance safely and have understood the
resulting dangers. Do not let children play with the appliance. Cleaning and
user maintenance must not be performed by children unless they are being
supervised. Keep children under the age of 8 years away from the appliance and
power cable. 1.4Safe installation
WARNING Risk of injury! Improper installation may cause injury. When
installing and connecting the appliance, follow the instruc-
tions in the manual and installation instructions.
4
Safetyen
WARNING Risk of electric shock! Incorrect installation is dangerous. Connect
and operate the appliance only in accordance with the
specifications on the rating plate. Always use the supplied power cable for
the new appliance. Connect the appliance to a power supply with alternating
cur-
rent only via a properly installed socket with earthing. The protective
conductor system of the domestic electrical in-
stallation must be properly installed. Never equip the appliance with an
external switching device,
e.g. a timer or remote control. When the appliance is installed, the mains
plug of the power
cord must be freely accessible. If free access is not possible, an isolating
switch must be integrated into the permanent electrical installation according
to the installation regulations. When installing the appliance, check that the
power cable is not trapped or damaged. Cutting through the supply hose or
immersing the Aqua-Stop valve in water is dangerous. Never immerse the plastic
housing in water. The plastic housing on the supply hose contains an electric
valve. Never cut through the supply hose. The supply hose contains electric
power cables.
WARNING Risk of fire! It is dangerous to use an extended power cord and non-
approved adapters. Do not use extension cables or multiple socket strips. Only
use adapters and power cords approved by the manufac-
turer. If the power cord is too short and a longer one is not available,
please contact an electrician to have the domestic installation adapted.
5
enSafety
Contact between the appliance and installation lines may lead to a defect in
these lines, e.g. gas pipes and power lines. Gas from a corroded gas pipe can
ignite. A damaged power line can cause a short circuit. Check that there is a
distance of at least 5 cm between the ap-
pliance and installation lines. WARNING Risk of injury!
Hinges move when opening and closing the appliance door and can cause injury.
If built-under or integrable appliances are not in a cavity so that
one side is accessible, the hinge area must be covered at the side. Covers are
available from Customer Service or specialist outlets.
WARNING Risk of tipping! Improper installation may cause the appliance to tip
up. Only install built-under or integrable appliances under a continu-
ous worktop that is securely connected to adjacent cabinets. 1.5Safe use
WARNING Risk of serious harm to health! Failure to comply with safety
instructions and directions for use on packagings of detergent and rinse aid
products may cause serious harm to health. Follow the safety instructions and
directions for use on the
packagings of detergent and rinse aid products. WARNING Risk of explosion!
Adding solvents to the interior of the appliance may cause explosions. Never
add solvents to the interior of the appliance.
6
Safetyen
Highly caustic alkaline or highly acidic cleaning agents in conjunction with
aluminium parts in the interior of the appliance may cause explosions. Never
use highly caustic alkaline or highly acidic cleaning
agents, in particular commercial or industrial products, in conjunction with
aluminium parts (e.g. grease filters of extractor hoods or aluminium pans),
e.g. for the Machine Care programme.
WARNING Risk of injury! Leaving the appliance door open may result in injury.
Only open the appliance door to load or unload tableware in or-
der to prevent accidents, e.g. through tripping. Do not sit or stand on the
appliance door when open. Knives and utensils with sharp points can cause
injuries. Arrange knives and utensils with sharp points in the cutlery bas-
ket with the points downwards, on the knife shelf or in the cutlery drawer.
WARNING Risk of scalding! If you open the appliance door while the programme
is running, hot water may splash out of the appliance. Open the appliance door
carefully if the programme is still run-
ning. WARNING Risk of electric shock!
An ingress of moisture can cause an electric shock. Only use the appliance in
enclosed spaces. Never expose the appliance to intense heat or humidity. Do
not use steam- or high-pressure cleaners to clean the appli-
ance. If the insulation of the power cord is damaged, this is dangerous. Never
let the power cord come into contact with hot appliance
parts or heat sources. Never let the power cord come into contact with sharp
points or
edges. Never kink, crush or modify the power cord.
7
enSafety
1.6Damaged appliance WARNING Risk of electric shock!
If the appliance or the power cord is damaged, this is dangerous. Never
operate a damaged appliance. Never operate an appliance with a cracked or
fractured surface. Never pull on the power cord to unplug the appliance.
Always
unplug the appliance at the mains. If the appliance or the power cord is
damaged, immediately un-
plug the power cord or switch off the fuse in the fuse box and turn off the
water tap. Call customer services. Page 48 Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
staff. Only use genuine spare parts when repairing the appliance. If the power
cord of this appliance is damaged, it must be replaced with a special
connection cable, which is available from the manufacturer or his Customer
Service. 1.7Risk to children
WARNING Risk of suffocation! Children may put packaging material over their
heads or wrap themselves up in it and suffocate. Keep packaging material away
from children. Do not let children play with packaging material. Children may
breathe in or swallow small parts, causing them to suffocate. Keep small parts
away from children. Do not let children play with small parts. Children may
become trapped in the appliance and suffocate. Use the childproof lock if
fitted. Never let children play with or operate the appliance.
8
Safetyen
WARNING Risk of harm to health! Children can lock themselves in the appliance,
thereby putting their lives at risk. With redundant appliances, unplug the
power cord. Then cut
through the cord and damage the lock on the appliance door beyond repair so
that the appliance door will no longer close.
WARNING Risk of crushing! With higher-level appliances, children can become
crushed between the appliance door and cabinet doors underneath. Keep an eye
on children when opening and closing the appli-
ance door. WARNING Risk of chemical burns!
Rinse aid and detergent may cause chemical burns to the mouth, throat and
eyes. Keep children away from detergent and rinse aid products. Keep children
away from the appliance when open. The water in
the interior of the dishwasher is not drinking water. It may contain residues
of detergents and rinse aid.
WARNING Risk of injury! Children may get their fingers caught in the slots of
the tablet collecting tray and injure themselves. Keep children away from the
appliance when open. 1.8Safety systems Protect children from possible hazards
resulting from the appliance. The appliance is equipped with a Childproof lock
Page 11.
9
Preventing
2Preventing Preventing material damage
Preventing
2.1Safe installation
ATTENTION! Improper installation of the appliance may cause damage. If the
dishwasher is installed above
or below other domestic appliances, follow the information on installation in
combination with a dishwasher in the installation instructions for the
individual appliances. If there is no information or if the installation
instructions do not include the relevant information, contact the manufacturer
of these appliances to check that the dishwasher can be installed above or
below these appliances. If no information is available from the manufacturer,
the dishwasher should not be installed above or below such appliances. To
ensure the safe operation of all domestic appliances, continue following the
installation instructions for the dishwasher. Do not install the dishwasher
under a hob. Do not install the dishwasher near heat sources, e.g. radiators,
heat storage tanks, ovens or other appliances that generate heat. Contact
between the appliance and water pipes may lead to corrosion of these pipes,
possibly causing them to leak. Check that there is a distance of at least 5 cm
between the appliance and the water pipe. The pipes supplied for the drinking
water and waste water connections are not affected here.
10
Modified or damaged water hoses may result in material damage and damage to
the appliance. Never kink, crush, modify or cut
through water hoses. Only use the water hoses supplied
with the appliance or genuine spare hoses. Never re-use water hoses that have
been used before. If the water pressure is too high or too low, the appliance
may not be able to operate properly. Make sure that the water pressure in the
water supply system is min. 50 kPa (0.5 bar) and max. 1000 kPa (10 bar). If
the water pressure exceeds the maximum value specified, a pressure-reducing
valve must be installed between the drinking water connection and the hose set
of the appliance.
Safe use
ATTENTION! Escaping water vapour can damage fitted units. When the programme
ends, leave
the appliance to cool down for a while before opening the door. Special salt
for dishwashers can damage the tub due to corrosion. To make sure that any
special salt that escapes is washed out of the tub, add the special salt to
the dispenser for special salt immediately before the programme starts.
Detergent may damage the water softening system. Only fill the dispenser of
the water softening system with special dishwasher salt. Unsuitable cleaning
agents may damage the appliance. Do not use a steam cleaner.
So as not to scratch the finish on the appliance, do not use sponges with a
rough surface or abrasive cleaning agents.
To prevent corrosion, do not use sponge cloths on dishwashers with a stainless
steel front or rinse such cloths thoroughly several times before using them
for the first time.
Childproof locken 2. Pull the catch of the childproof
lock forwards and close the appliance door .
1
3Childproof lock
The childproof lock lets you protect children from possible hazards resulting
from the appliance. The appliance is equipped with a door lock.
3.1Door lock
The door lock is a mechanical safety system and makes it more difficult to
open the appliance door. You can activate or deactivate the door lock.
WARNING Risk of suffocation! Children may become trapped in the appliance and
thus suffocate. Activate the door lock and close
the appliance door. “Opening appliance door”, Page 31 Activating the door lock
Note: The door lock remains activated until it is deactivated manually. 1.
Open the appliance door.
2 Deactivating the door lock 1. Open the appliance door. 2. Push the catch of
the childproof
lock to the right and slide it backwards .
1
2
3. Close the appliance door.
4Environmental protection and saving energy
4.1Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.
Sort the individual components by
type and dispose of them separately.
11
Installation and connection
4.2Saving energy
If you follow these instructions, your appliance will use less electricity and
less water. Use the Eco 50° programme. a The Eco 50° programme is en-
ergy-efficient and environmentally friendly. “Programmes”, Page 18
5Installation and connection
To ensure proper operation, connect the appliance to the power and water
supply correctly. Observe the specified criteria and the installation
instructions.
5.1Scope of supply
After unpacking all parts, check for any damage in transit and completeness of
the delivery. If you have any complaints, contact the dealer who sold you the
appliance or our Customer Service. Note: The appliance has been tested at the
factory to check it is in working order. It is possible that water has left
marks on the appliance. These marks will disappear after the first wash cycle.
The delivery consists of the following: ¡ Dishwasher ¡ Operating instructions
¡ Installation Instructions ¡ Further information documents ¡ Installation
material ¡ Steam guard plate ¡ Salt filling aid funnel ¡ Mains cable ¡ Quick
reference guide
12
Installing and connecting the appliance
You can position your built-under or integrable appliance in a fitted kitchen
between wooden and plastic walls. If you subsequently install your dishwasher
as a free-standing appliance, you must stop it from tipping over, e.g. by
screwing it to the wall or installing it under a continuous worktop that is
securely connected to adjacent cabinets. 1. Follow the safety instructions.
Page 4 2. Follow the instructions for electrical
connection. 3. Check the Scope of supply and
the condition of the appliance. 4. Consult the installation instructions
for the installation dimensions required. 5. Make the appliance level using
the height-adjustable feet. Make sure that the appliance is standing on the
floor securely. 6. Install the drainage connection. Page 12 7. Install the
drinking water connection. Page 13 8. Connect the appliance to the power
supply.
5.3Drainage connection
Connect your appliance to drainage connection so dirty water is discharged via
the wash cycle.
Installing the drainage connection 1. Consult the installation instructions
supplied for the steps required here. 2. Connect the wastewater hose to the
outlet connection of the siphon using the enclosed parts.
3. When doing so, check that the wastewater hose is not kinked, crushed or
twisted.
4. Also check that there is no cover in the drainage system preventing the
wastewater from being discharged.
5.4Drinking water connection
Connect your appliance to a drinking water connection. Installing the drinking
water connection Note ¡ If you are replacing the appliance,
you must use a new water supply hose. 1. Consult the installation instructions
supplied for the steps required here. 2. Connect the appliance to the drinking
water connection using the enclosed parts. Observe the Technical data. 3. When
doing so, check that the drinking water connection is not kinked, crushed or
twisted.
5.5Electrical connection
Connecting the appliance to the electricity supply Notes ¡ Follow the Safety
instructions
Page 4. ¡ Please note that the water safety
system is only functional if there is a power supply. 1. Insert the non-
heating appliance plug of the power cable into the appliance.
Installation and connectionen
2. Insert the mains plug of the appliance’s power cable in a socket nearby.
The connection data of the appliance can be found on the rating plate.
3. Check the mains plug is inserted properly.
13
enFamiliarising yourself with your appliance
6Familiarising yourself with your appliance
6.1Appliance
You can find an overview of the parts of your appliance here.
8 7
9
6
5
10
4
3
11
2
12
1
1
Rating plate
Rating plate with E number and FD number Page 48. The data you need for Customer Service Page 48.
1 Depending on the appliance specifications
14
Familiarising yourself with your applianceen
2
Detergent dispenser
Add detergent to the detergent dispenser. “Detergent”, Page 27
3
Bottom basket
Bottom basket Page 22
4
Filter system
Filter system Page 39
5
Dispenser for special salt Add special salt to the dispenser for special salt.
“Water softening system”, Page 23
6
Tablet collecting tray
During the wash cycle tablets automatically fall out of the detergent dispenser into the tablet collecting tray where they can fully dissolve.
7
Top basket
Top basket Page 21
8
Cutlery shelf1
Cutlery shelf Page 22
9
Upper spray arms
The upper spray arms wash the tableware in the top basket. If the tableware has not been washed properly, clean the spray arms. “Cleaning spray arms”, Page 40
10 Lower spray arm
The lower spray arm washes the tableware in the bottom basket. If the tableware has not been washed properly, clean the spray arms. “Cleaning spray arms”, Page 40
11 Cutlery basket
Cutlery basket Page 23
12 Dispenser for rinse aid
Add rinse aid to the dispenser for rinse aid. “Rinse aid system”, Page 26
1 Depending on the appliance specifications
15
enFamiliarising yourself with your appliance
6.2Controls
You can use the control panel to configure all functions of your appliance and
to obtain information about the operating status. With some buttons you can
perform different functions.
12 3 4567 8 9
ABC
14 13 12 11 10
1
ON/OFF button and reset Switching on the appliance
button
Page 32
Switching off the appliance
Page 33
Terminating the programme
Page 33
2
Programme button
Programmes Page 18
3
Programmes
Programmes
4
Water supply display
Display for water supply
5
Programme sequence display The programme sequence display shows the current cycle of the appli-
ance, e.g. washing.
6
Timer programming1
Setting timer programming Page 32
7
Remote Start
“Remote Start “, Page 37
8
button
If you press
for approx. 3
seconds, you can open the basic set-
tings.
9
Start button
Starting the programme Page 32
1 Depending on the appliance specifications
16
Familiarising yourself with your applianceen
10
Programme buttons and addi- Programmes
tional functions
“Programmes”, Page 18
Additional functions
“Additional functions”, Page 20
11 Door handle1
Open the appliance door. Page 31
12 WLAN display
Home Connect Page 36
13 Rinse aid refill indicator
Rinse aid system “Adding rinse aid”, Page 26
14 Special salt refill indicator
Water softening system “Adding special salt”, Page 24
1 Depending on the appliance specifications
17
Programmes
7Programmes
You can find an overview of the programmes that can be selected here. Different programmes, which can be found on the control panel of your appliance, are available depending on the appliance configuration. The running time may vary depending on the programme selected. The running time depends on the water temperature, the quantity of tableware, the level of soiling and the Additional function Page 20 selec-
ted. The running time will change if the rinse aid system is switched off or rinse aid needs to be added. The consumption values can be found in the quick reference guide. The consumption values relate to normal conditions and a water hardness of 9 – 20 °E. Different influencing factors such as water temperature or pipe pressure may result in deviations.
Programme Intensive 70° Eco 50°
NightProgram Express 65° – 1h Favourite
Use Tableware: ¡ Pots and pans, non-fragile
tableware and cutlery Level of soiling: ¡ Stubborn, burned or dried-on
food remnants containing starch and protein Tableware: ¡ Mixed tableware and
cutlery Level of soiling: ¡ Common household food remnants lightly dried on
Tableware: ¡ Mixed tableware and cutlery Level of soiling: ¡ Common household
food rem-
nants lightly dried on
Tableware: ¡ Mixed tableware and cutlery Level of soiling: ¡ Common household
food rem-
nants lightly dried on “Favourite “, Page 19
Programme sequence Intensive: ¡ Pre-Rinse ¡ Cleaning 70 °C ¡ Intermediate
rinse ¡ Final rinse 69 °C ¡ Dry
Most economical programme: ¡ Pre-Rinse ¡ Cleaning 50 °C ¡ Intermediate rinse ¡
Final rinse – °C ¡ Drying Reduced noise: ¡ Pre-Rinse ¡ Cleaning 50 °C ¡
Intermediate rinse ¡ Final rinse 65 °C ¡ Dry Time-optimised: ¡ Cleaning 65 °C
¡ Intermediate rinse ¡ Final rinse 69 °C ¡ Dry –
18
Note: The relatively long running time in the Eco 50 ° programme is due to
longer soaking and drying times. This results in optimal consumption values.
7.1Information for test institutes
Test institutes are provided with information for comparability tests, e.g.
according to EN60436. These are the conditions for conducting the tests,
however they are not the results or consumption values. Request by e-mail to:
dishwasher@test-appliances.com The product number (E-Nr.) and the production
number (FD) are required here. They can be found on the rating plate on the
appliance door.
7.2Favourite
You can save a combination of a programme and an additional function to the
button. Save the programme via the Home Connect app. The pre-rinse program is
saved to this button at the factory. Pre-rinse is suitable for all types of
tableware. The tableware undergoes intermediate cleaning via cold rinsing.
Tips ¡ You can use the Home Connect
app to download additional programmes and save them to the button.1 ¡ To reset
the programme to the Pre-rinse programme stored at the factory, use the Home
Connect app 1 or reset your appliance to the factory settings.
1 Depending on the appliance specifications
Programmesen 19
enAdditional functions
8Additional functions
You can find an overview of the additional functions that can be selected here. Different additional functions, which can be found on the control panel of your appliance, are available depending on the appliance configuration. You can select certain additional functions depending on the programme.
Symbol
Additional func- Use tion
ExtraDry
¡ For a better drying result the final rinse temperature is increased and the
drying phase extended.
¡ Especially suitable for drying plastic parts. ¡ There is a slight increase
in energy con-
sumption and the running time is extended.
Extra Rinse
¡ An additional rinse cycle is activated between the cleaning and final rinse
programme cycles.
¡ This will increase the running time and water consumption rises.
IntensiveZone
¡ Switch on with mixed loads containing tableware with different soiling
levels, e.g. place very soiled pots and pans in the bottom basket and normally
soiled tableware in the top basket.
¡ The spray pressure in the bottom basket is increased and the maximum
programme temperature maintained longer. This will increase the running time
and energy consumption.
SpeedPerfect+
¡ The run time is shortened by 15% to 75%1 depending on the rinse programme.
¡ The additional function can be activated before the start of the programme
and at any time when the programme is running.
¡ Energy and water consumption are increased.
1 Depending on the appliance specifications
20
9Features
You can find an overview of the possible features of your appliance and how to
use them here. These features depend on the model of your appliance.
9.1Top basket
Arrange cups, glasses and small items of tableware in the top basket.
a
2. Remove the basket.
Featuresen
3. Re-attach the basket to the upper rollers (setting 3) or lower rollers (setting 1).
Knife shelf 1 You can adjust the height of the top basket to make room for
larger items of tableware.
Adjusting top basket with pairs of rollers To wash large items of tableware in
the baskets, adjust the shelf position of the top basket. 1. Pull out the top
basket.
Check that the basket is level on both sides. 4. Slide the basket back in.
1 Depending on the appliance specifications 21
enFeatures
9.2Knife shelf
Use the shelf for knives and long items of cutlery.
9.4Bottom basket
Arrange pans and plates in the bottom basket.
a
9.3Etagere
Use the cutlery shelf and space underneath for small cups and glasses or for
large items of cutlery, e.g. cooking spoons or serving cutlery.
Cutlery basket 1 Large plates up to a diameter of 31 cm can be arranged in the bottom basket as shown.
If you do not need the cutlery shelf, you can fold it up.
1 Depending on the appliance specifications 22
first timeen
9.5Cutlery basket
Arrange cutlery in the cutlery basket, always without sorting it and with the
sharp points downwards.
10Before firsttime using for the first time
1. Add special salt. Page 24 2. Add rinse aid. Page 26 3. Switch on the
appliance.
Page 32 4. Setting the water softening system.
Page 24 5. Set the amount of rinse aid to be
dispensed. Page 26 6. Add detergent Page 27. 7. Start the Programme with the
highest cleaning temperature without tableware. To remove any marks from water
or other residues, we recommend you operate the appliance without tableware
before using it for the first time.
Tip: You can change these settings and other Basic settings Page 34 at any
time.
first time
10.1Performing the initial configuration
On initial start-up or after a reset to the factory settings, you will need to
make settings. Tip: Connect your appliance to a mobile device. You can
conveniently change all settings via the Home Connect app. Requirement: The
appliance has been installed and connected. Page 12
11Water softening system
Hard water leaves limescale on the tableware as well as the washing tank, and
parts of the appliance may become blocked. To ensure good dishwashing results,
you can treat the water with special salt and the water softening system. To
avoid damage to the appliance, water with a hardness above 9 °E must be
softened.
11.1Overview of water hardness settings
You can find an overview of the water hardness values that can be selected
here. You can find out how hard your water is from your local water company or
by using a water hardness tester.
23
enWater softening system
Water
Hardness mmol/l
hardness range
value °E
0 – 8
Soft
0 – 1.1
9 – 20
Medium 1.2 – 2.9
21 – 26 Hard
3.0 – 3.7
27 – 44 Hard
3.8 – 6.2
Level
0 1 2 3
LED A LED B LED C
ABC
4. Press
repeatedly until the
right water hardness has been set.
ABC
Note: Set the water hardness determined on your appliance. “Setting the water softening system”, Page 24 With a water hardness of 0 – 8 °E you can dispense with special salt for dishwashers and switch off the water softening system. “Switching off the water softening system”, Page 25
11.2Setting the water softening system
Set the water hardness on your appliance. 1. Determine the water hardness and
the appropriate setting value. “Overview of water hardness settings”, Page 23
2. Press .
3. To open the appliance settings,
press
for 3 seconds.
a flashes.
24
0, 1, 2 or 3 LEDs will light up accordingly. “Overview of water hardness
settings”, Page 23 The factory setting is level 1 (LED A Page 16). 5. To save
the settings, press
for 3 seconds.
11.3Special salt
You can use special salt to soften water. Adding special salt If the special
salt refill indicator lights up, add special salt to the dispenser for special
salt just before the programme starts. The consumption of special salt depends
on the water hardness. The higher the water hardness, the greater the
consumption of special salt.
ATTENTION! Detergent may damage the water softening system. Only fill the
dispenser of the water
softening system with special dishwasher salt.
Special salt for dishwashers can damage the tub due to corrosion. To make sure
that any special salt
that escapes is washed out of the tub, add the special salt to the dispenser
for special salt immediately before the programme starts. 1. Unscrew the lid
of the dispenser for special salt and remove. 2. On initial start-up: Fill the
dispenser right up with water. 3. Note: Only use special salt for dishwashers.
Do not use salt tablets. Do not use table salt. Add the special salt to the
dispenser.
Fill the dispenser right up with special salt. The water in the dispenser is
displaced and forced out. 4. Place the lid back on the dispenser and turn to
close.
Water softening systemen
11.4Switching off the water softening system
If you find the special salt refill indicator irritating, e.g. when using combined detergents with salt replacement substances, you can switch the indicator off.
Note To avoid damage to the appliance, only switch off the water softening
system in the following cases: ¡ The water hardness is max. 26 °E
and you are using a combined detergent with salt replacement substances.
According to the manufacturers, combined detergents with salt replacement
substances can generally only be used up to a water hardness of 26 °E without
adding special salt. ¡ The water hardness is 0 – 8 °E. You do not need to use
special salt.
1. Press .
2. To open the appliance settings,
press
for 3 seconds.
a flashes.
3. Press
repeatedly until no LED
lights up (level 0).
“Overview of water hardness set-
tings”, Page 23
4. To save the settings, press for 3 seconds.
a The water softening system is
switched off and the salt refill indicator is deactivated.
25
enRinse aid system
12Rinse aid system
12.1Rinse aid
For optimum drying results, use rinse aid. Only use rinse aid for domestic
dishwashers. Adding rinse aid If the rinse aid refill indicator lights up, top
up with rinse aid. Only use rinse aid for domestic dishwashers. 1. Press the
catch on the lid of the
dispenser for rinse aid and lift .
2
4. Close the lid of the dispenser for rinse aid.
a The lid clicks into position.
12.2Setting the amount of rinse aid
If there are streaks or water marks on tableware, change the amount of rinse aid.
1. Press .
2. To open the appliance settings,
press
for 3 seconds.
a flashes.
3. Press flashes.
repeatedly until
4. Press
repeatedly until the
right amount of rinse aid has been
set.
ABC
1
2. Add rinse aid up to the max mark.
max
3. If rinse aid spills out, remove it from the tub. Spilled rinse aid can
cause excessive frothing during the wash cycle.
26
0, 1, 2 or 3 LEDs will light up accordingly. The factory setting is level 2
(LED A and LED B Page 16). A low setting adds less rinse aid
during the wash cycle and reduces streaking on tableware. A higher setting
adds more rinse aid during the wash cycle, reduces water marks and improves
the drying result. 5. To save the settings, press
for 3 seconds.
12.3Switching the rinse aid system off
If you find the rinse aid refill indicator irritating, e.g. when using combined detergents with a rinse aid component, you can switch the rinse aid system off.
Tip: The function of rinse aid is limited with combined detergents. You will generally get better results using rinse aid.
1. Press .
2. To open the appliance settings,
press
for 3 seconds.
a flashes.
3. Press flashes.
repeatedly until
4. Press
repeatedly until no LED
Page 16 lights up (level 0).
5. To save the settings, press for 3 seconds.
a The rinse aid system is switched off and the rinse aid refill indicator is deactivated.
13Detergent
13.1Suitable detergents
Only use detergents that are suitable for dishwashers. Both separate and
combined detergents are suitable. For optimum washing and drying results, use
separate detergent, adding Special salt Page 24 and Rinse aid Page 26
separately. Modern, powerful detergents mainly use a low-alkaline formulation
with enzymes. Enzymes break down starch and remove protein. Oxygenbased
bleaching agents are generally used to remove coloured marks, e.g. tea or
ketchup.
Detergenten
Note: Follow the manufacturer’s instructions for each detergent. Tip: Suitable
detergents are available online via our website or from Customer Service Page
48.
Tabs Tabs are suitable for all cleaning functions and do not need to be
measured out. With shorter programmes tabs sometimes do not dissolve entirely
and leave residues of detergent. This may impair the cleaning effect.
Powder detergent Powder detergent is recommended for shorter programmes. The
dosage can be adjusted to the level of soiling.
Liquid detergent Liquid detergent works faster and is recommended for shorter
programmes without PreRinse. Sometimes liquid detergent may leak out despite
the detergent dispenser being closed. This is not a fault and is non-critical
if you remember the following: ¡ Only choose a programme without
PreRinse. ¡ Do not select timer programming
for starting the programme. The dosage can be adjusted to the level of
soiling.
Separate detergents Separate detergents are products that do not contain
components other than detergent, e.g. powder detergent or liquid detergent.
With powder and liquid detergent the dosage can be individually adjusted to
the level of soiling of the tableware.
27
enDetergent
For better washing and drying results and to avoid damage to the appliance,
please additionally use Special salt Page 24 and Rinse aid Page 26. Combined
detergent Besides conventional separate detergents, a number of products are
available with additional functions. These products contain not only detergent
but also rinse aid and salt replacement substances (3in1) and, depending on
the combination (4in1, 5in1, …), additional components such as glass
protection or stainless steel cleaner. According to the manufacturers,
combined detergents generally only function up to a water hardness of 26 °E.
With a water hardness above 26 °E you will need to add special salt and rinse
aid. For the best washing and drying results we recommend using special salt
and rinse aid from a water hardness of 17 °E. If you are using combined
detergent, the washing programme is adjusted automatically to ensure the best
possible washing and drying result.
13.2Unsuitable detergents
Do not use detergent which could cause damage to the appliance or present a
risk to health. Hand washing-up liquid Hand washing-up liquid can cause
increased frothing and damage the appliance. Detergent containing chlorine
Chlorine residue on tableware may present a risk to health.
13.3Information on detergents
Follow the instructions on detergents in everyday use. ¡ Detergents marked as
“organic” or
“ecological” (environmentally friendly) generally contain lower levels of
active agents or completely dispense with certain substances. The cleaning
effect may be restricted here. ¡ Set the rinse aid and the water softening
system to the separate detergent or combined detergent in use. ¡ According to
the manufacturers, combined detergents with salt replacement substances can
only be used up to a certain water hardness, usually 26 °E, without adding
special salt. For the best washing and drying results we recommend using
special salt from a water hardness of 17 °E. ¡ To prevent sticking, only touch
detergents in a water-soluble pouch with dry hands and only ever place them in
a dry detergent dispenser. ¡ Even if the rinse aid and special salt refill
indicators light up, washing programmes will run properly with combined
detergents. ¡ The function of rinse aid is limited with combined detergents.
You will generally get better results using a separate rinse aid. ¡ Use
tablets with a special drying performance.
13.4Adding detergent
1. To open the detergent dispenser, press the locking latch.
28
2. Add the detergent to the dry detergent dispenser.
50 ml 25 ml 15 ml
Tablewareen 3. Close the lid of the detergent dis-
penser.
If you are using tablets, one is enough. Insert the tablets in a horizontal position. If you are using powder or liquid detergent, follow the manufacturer’s instructions and quantities for dosage in the detergent dispenser. 20 ml 25 ml detergent is sufficient for normal soiling. If tableware is only lightly soiled, slightly less than the amount of detergent specified is usually sufficient.
a The lid clicks into position. a The detergent dispenser will open
automatically at the optimum time during the programme. Powder or liquid
detergent will spread around the washing tank and dissolve there. Tablets will
fall into the tablet collecting tray and dissolve in the right dosage. In
order to ensure that tablets can dissolve evenly, do not place any other
objects in the tablet collecting tray. Tip: If you use powder detergent and
select a program with pre-rinse, you can also add a little detergent to the
interior door of the appliance.
14Tableware
Only clean tableware that is suitable for dishwashers. Note: Decorated
glassware and parts made of aluminium or silver may fade or discolour with
dishwashing. Delicate types of glass may turn cloudy after a few washing
cycles.
29
enTableware
14.1Damage to glass and tableware
Only put glasses and china in the dishwasher if it is marked as dishwasher- safe by the manufacturer. Avoid damage to glass and tableware.
Cause
Recommendation
The following
Only put table-
tableware is not ware in the dish-
dishwasher-safe: washer if it is
¡ Items of cut- marked as dish-
lery and table- washer-safe by
ware made the manufacturer.
from wood
¡ Decorated
glassware, an-
tique and
hand-crafted
tableware
¡ Plastic parts
not resistant to
heat
¡ Tableware
made from
copper or tin
¡ Tableware
soiled with
ash, wax, lub-
ricating grease
or paint
¡ Very small
items of table-
ware
The chemical
Use a detergent
composition of marked by the
detergent causes manufacturer as
damage.
gentle on table-
ware.
Cause
Recommendation
Highly caustic al- If you are using
kaline or highly highly caustic al-
acidic cleaning kaline or highly
solutions, in par- acidic cleaning
ticular commer- agents, in partic-
cial or industrial ular commercial
cleaners, are not or industrial
safe to use in the cleaning agents,
dishwasher with do not put alu-
aluminium.
minium parts in
the dishwasher
interior.
The water temperature of the programme is too high.
Select a programme with lower temperatures. After the programme has ended, take glassware and cutlery out of the appliance without delay.
14.2Arrange tableware
Arrange tableware correctly to optimise the dishwashing result and prevent
damage to both the appliance and tableware. Tips ¡ Using the appliance allows
you to
save energy and water compared to washing-up by hand. ¡ See our website for
examples of how to load your appliance efficiently. ¡ To save energy and
water, load the machine with the number of place settings specified (standard
load with tableware and cutlery). “Technical specifications”, Page 49
30
¡ For better washing and drying results, position items with curves or recesses at an angle so water can run off.
operationen
1. Remove large remnants of food from tableware. To save resources, do not
prerinse tableware under running water.
2. Observe the following when arranging tableware: Put heavily soiled
tableware in the bottom basket, e.g. pans. The more powerful the spray jet,
the better the dishwashing result will be. To prevent damage to tableware,
arrange it so it is stable and cannot tip over. To prevent injury, arrange
cutlery with the points and sharp edges facing down. Position containers
with the openings facing down so no water can collect in them. Do not block
the spray arms make sure that they can turn freely. Do not place small parts
in the tablet collecting tray and do not block it with tableware so as not to
obstruct the lid of the detergent dispenser.
14.3Removing tableware
WARNING Risk of injury! Hot tableware can cause burns to the skin. When hot,
tableware is sensitive to shock, may crack and can result in injury. When the
programme has ended,
do not empty the appliance until the tableware has cooled down for a while. 1.
To prevent water dripping on the tableware, unload it starting at the bottom
and working up. 2. Check the washing tank and accessories for soiling and
clean if necessary. “Cleaning and servicing”, Page 38
15Basic operation operation
operation
15.1Opening appliance door
1. If the childproof lock is not activated, open the appliance door.
31
enoperation 2. If the childproof lock is activated,
press the catch of the lock to the right and open the appliance door .
1
2
15.2Switching on the appliance
Press . The Eco 50° programme is set by default. If you do not perform any
actions on the appliance for 10 minutes, it will switch off automatically. 1
15.3Setting a programme
To adjust the washing programme to the soiling level of the tableware, select
a suitable programme. Press the programme button re-
peatedly until the right programme has been selected. a The programme is set
and the LED flashes.
15.4Setting additional functions
You can set additional functions to complete the washing programme selected.
Note: The additional functions which can be used depend on the programme
selected. Press the button for the relevant
additional function. “Additional functions”, Page 20 a The additional function
is set and the additional function button flashes.
15.5Setting timer programming1
You can delay the start of the programme by 3, 6 or 9 hours. 1. Press
repeatedly until the relev-
ant display lights up. 2. To activate timer programming,
press . Note: To deactivate timer programming, press repeatedly until none of
the displays 3h, 6h or 9h light up.
15.6Starting the programme
Press . a The programme has ended when
no indicators on the controls light up. Notes ¡ If you want to add more
tableware while the appliance is running, do not use the tablet collecting
tray as a handle for the top basket. You might touch the partially dissolved
tablet.
1 Depending on the appliance specifications 32
¡ You can only change a programme when running if you cancel it. “Terminate
programme”, Page 33
¡ The appliance switches off automatically 1 minute after the end of the
programme to save energy. If you open the appliance door immediately after the
programme has ended, the appliance will switch off after 4 seconds.
15.7Interrupting programme
Note: When you open the appliance door once the appliance has heated up, leave
the door slightly ajar for a few minutes and then close it. This will help
prevent excess pressure building up in the appliance and stop the appliance
door bursting open. 1. Open the appliance door carefully. 2. Press . a The
programme is saved and the
appliance switches off. 3. Press to resume the pro-
gramme. 4. Close the appliance door.
15.8Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
1. Open the appliance door.
2. Press 4 seconds.
for approx.
3. Close the appliance door.
a The programme is cancelled and
ends after approx. 1 minute.
15.9Switching off appliance
1. Please note the information on Safe use Page 10.
operationen
2. Press . Tip: If you press during the wash cycle, the programme currently
running will be interrupted. When you switch the appliance back on, the
programme continues automatically.
33
enBasic settings
16Basic settings
You can configure the basic settings for your appliance to meet your needs.
16.1Overview of the basic settings
The basic settings depend on the features of your appliance.
Basic setting Water hardness Rinse aid disp.
Extra Dry
Selection Scale with 4 levels Scale with 4 levels
On Off 1
Signal volume Wi-Fi
Scale with 4 levels On Off 1
1 Factory setting (may vary according to model)
Description Set the water hardness.
Set the amount of rinse aid to be dispensed or switch off.
Switch Extra Dry on or off for each operation. For a better drying result the
temperature in the final rinse is increased. This may increase the running
time slightly. Note: Please take care with delicate tableware. “Setting Extra
Dry”, Page 35
Adjustment of tone volume. “Setting signal volume”, Page 35
Switch the wireless network connection on or off. “Set Wi-Fi”, Page 36 This
basic setting is not available until you have connected the appliance with the
Home Connect app. “Home Connect “, Page 36
34
Basic settingsen
Basic setting Remote Start
Selection Scale with 3 levels
Factory setting
Reset
1 Factory setting (may vary according to model)
Description Activate or deactivate the function. “Activating Remote Start “, Page 36 This basic setting is not available until you have connected the appliance with the Home Connect app. “Home Connect “, Page 36 Restore changed settings to the factory settings. The settings for initial start-up must be configured. “Restoring factory settings”, Page 36
Setting Extra Dry
1. Press .
2. To open the appliance settings,
press
for 3 seconds.
a flashes.
3. Press
repeatedly until
and flash.
4. Press
repeatedly until the
LEDs show the right value.
A
Setting signal volume
1. Press .
2. To open the appliance settings,
press
for 3 seconds.
a flashes.
3. Press
repeatedly until
and flash.
4. Press
repeatedly until the
right signal volume has been set.
ABC
If LED A is not lit up, Extra Dry is switched off. If LED A is lit up, Extra
Dry is switched on. 5. To save the settings, press
for 3 seconds.
0, 1, 2 or 3 LEDs will light up accordingly. The signal tone selected will be
heard. The factory setting is level 2 (LED A and LED B). 5. To save the
settings, press
for 3 seconds. 35
enHome Connect
Set Wi-Fi
1. Press .
2. To open the appliance settings,
press
for 3 seconds.
a flashes.
3. Press
repeatedly until
and flash.
4. Press
repeatedly until the
LEDs show the right value.
A
If LED A is not lit up, the wireless network connection is switched off. If
LED A is lit up, the wireless network connection is switched on. 5. To save
the settings, press
for 3 seconds.
Activating Remote Start
1. Press .
2. To open the appliance settings,
press
for 3 seconds.
a flashes.
3. Press flashes.
repeatedly until
4. Press
repeatedly until the
LEDs show the right value.
ABC
If LED A lights up, the function is permanently deactivated. If LED A and LED
B light up, the function can be selected using the
button. If LED A, LED B and LED C light up, the function is permanently
activated. The factory setting is level 2 (LED A and LED B). 5. To save the
settings, press
for 3 seconds.
Restoring factory settings
1. Press .
2. To open the appliance settings,
press
for 3 seconds.
a flashes.
3. Press
repeatedly until ,
and flash.
4. Press
to set the appliance
back to the factory settings.
a The appliance is reset.
17Home Connect HomeConnect
This HomeConnect appliance is network-capable. Connect your appliance to a
mobile device to control its functions via the Home Connect app. The Home
Connect services are not available in every country. The availability of the
Home Connect function depends on the availability of
36
Home Connect services in your country. You can find information about this at:
www.home-connect.com. To be able to use Home Connect, you must first set up
the connection to the WLAN home network (Wi-Fi1) and to the Home Connect app.
The Home Connect app guides you through the entire login process. Follow the
instructions in the Home Connect app to configure the settings. Tips ¡ Please
consult the documents sup-
plied by Home Connect. ¡ Please also follow the instructions
in the Home Connect app. Note: Please note the safety precautions in this
instruction manual and make sure that they are also observed when operating
the appliance via the Home Connect app. “Safety”, Page 4
17.1Home Connect quick start
Connect your appliance to a mobile device quickly and easily. Setting up the
Home Connect app 1. Install the Home Connect app on
your mobile device.
2
2. Start the Home Connect app and set up access for Home Connect.
Home Connecten The Home Connect app guides you through the entire login
process.
Setting up Home Connect Requirements ¡ The Home Connect app has been
installed on your mobile device. ¡ The appliance is receiving signals
from the WLAN home network (WiFi) at its installation location. 1. Open the
Home Connect app and scan the following QR code.
2. Follow the instructions in the Home Connect app.
17.2Remote Start
You can use the Home Connect app to start the appliance with your mobile
device. Tip: If you permanently activate this function in the Basic settings ,
you can start your appliance with a mobile device at any time. Activating
Remote Start When you have selected level 2 in the basic settings of this
function, activate the function on your appliance.
1 Wi-Fi is a registered trademark of the Wi-Fi Alliance. 2 Apple App Store und
the Apple App Store logo are trademarks of Apple Inc. Google Play and the
Google Play logo are trademarks of Google LLC.
37
enCleaning and servicing
Requirements ¡ The appliance is connected to your
WLAN home network. ¡ The appliance is connected to the
Home Connect app. ¡ Level 2 is selected in the Basic
settings Page 35 of this function. ¡ A programme is selected. Press .
If you open the appliance door, the function is automatically deactivated. a
button lights up. Tip: To deactivate the function, press .
17.3Data protection
Please see the information on data protection. The first time your appliance
is registered on a home network connected to the Internet, your appliance will
transmit the following types of data to the Home Connect server (initial
registration): ¡ Unique appliance identification
(consisting of appliance codes as well as the MAC address of the Wi-Fi
communication module installed). ¡ Security certificate of the Wi-Fi
communication module (to ensure a secure data connection). ¡ The current
software and hardware version of your appliance. ¡ Status of any previous
reset to factory settings. This initial registration prepares the Home Connect
functions for use and is only required when you want to use the Home Connect
functions for the first time.
Note: Please note that the Home Connect functions can only be utilised with
the Home Connect app. Information on data protection can be retrieved in the
Home Connect app.
18Cleaning and servicing
To keep your appliance working efficiently for a long time, it is important to
clean and maintain it carefully.
18.1Cleaning the tub
WARNING Risk of harm to health! Using detergents containing chlorine may
result in harm to health. Never use detergents containing
chlorine. 1. Remove any coarse soiling in the
interior with a damp cloth. 2. Add detergent to the detergent dis-
penser. 3. Select the programme with the
highest temperature. 4. Start the programme without table-
ware. Page 32
18.2Cleaning products
Only use suitable cleaning products to clean your appliance. “Safe use”, Page
10
38
18.3Tips on appliance care
Follow the tips on appliance care to make sure your appliance functions properly at all times.
Action
Benefit
Wipe the door This ensures the seals, the front of parts of the applithe dishwasher ance will remain and the control clean and hypanel regularly gienic. using a damp cloth and washing-up liquid.
If the appliance This will prevent
is not going to unpleasant
be used for a
odours.
while, leave the
door slightly ajar.
18.4Filter system
The filter system removes coarse soiling from the dishwashing cycle.
3
2
1
1 Micro filter 2 Fine filter 3 Coarse filter
Cleaning filters Soiling in the dishwashing water may block the filters. 1.
After each wash check the filters
for residue.
Cleaning and servicingen 2. Turn the coarse filter anticlockwise
and remove the filter system . Check that no foreign objects
fall into the sump.
2
1
3. Pull down the micro filter to remove.
4. Press the locking catches together and lift the coarse filter out . 2 1
5. Clean the filter elements under running water. 39
enCleaning and servicing
Carefully clean the rim of dirt between the coarse and the fine filter. 6. Re-
assemble the filter system. Make sure that the locking catches on the coarse
filter click into position. 7. Insert the filter system into the appliance and
turn the coarse filter clockwise. Make sure that the arrow mark-
ings match up.
18.5Cleaning spray arms
Limescale and soiling in the dishwashing water may block the nozzles and
bearings on the spray arms. Clean the spray arms regularly. 1. Unscrew the
upper spray arms
and pull down to remove .
1
2
2. Pull up the lower spray arm to remove.
3. Check the outlet nozzles on the spray arms for blockages under running
water and remove any foreign bodies.
4. Insert the lower spray arm. a The spray arm clicks into position. 5.
Insert the upper spray arms and
screw firmly in place.
40
Troubleshootingen
19Troubleshooting
You can rectify minor faults on your appliance yourself. Read the
troubleshooting information before contacting after-sales service. This will
avoid unnecessary costs. Tip: You can find further information and
explanations on troubleshooting online by scanning the QR code in the table of
contents and on our website www.bosch-home.com.
WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to
the appliance should only be carried out by trained specialist
staff. Only use genuine spare parts when repairing the appliance. If the power
cord of this appliance is damaged, it must be replaced with a
special connection cable, which is available from the manufacturer or his
Customer Service.
Fault Display for water supply lights up
Cause and troubleshooting Supply hose is kinked. Install the supply hose without kinks. Water tap is turned off. Turn on the water tap. Water tap is jammed or furred up. Turn on the water tap. The filters in the water connection of the supply or AquaStop hose are blocked. 1. Switch off the appliance. 2. Pull out the mains plug. 3. Turn off the water tap. 4. Unscrew the water connection. 5. Remove the filter from the supply hose
6. Clean the filter. 41
enTroubleshooting
Fault Display for water supply lights up
Display “Check water supply” flashes
Displays flash
Cause and troubleshooting 7. Re-insert the filter in the supply hose. 8. Screw
the water connection back on. 9. Check the water connection for leaks.
10.Restore the power supply. 11.Switch the appliance on.
Wastewater hose is blocked or kinked. 1. Reposition the wastewater hose
without kinks. 2. Remove residues.
Siphon connection is still sealed. Check the connection to the siphon and open
if ne-
cessary.
Cover of the wastewater pump is loose. Secure the cover of the Wastewater pump
Page 46 so it clicks into position.
A technical fault is present. 1. Press . 2. Unplug the appliance or switch off
the fuse. 3. Wait at least 2 minutes. 4. Insert the mains plug of the
appliance in a socket
or switch on the fuse. 5. Switch the appliance on. 6. If the problem occurs
again:
Press . Turn off the water tap. Pull out the mains plug. Contact Customer
Service Page 48 and give
the error code.
Appliance door is not closed properly. Close the appliance door.
Arrange the tableware so that no parts project beyond the basket and prevent
the appliance door from closing properly.
42
Troubleshootingen
Fault All LEDs lit up or flashing.
Remnants of food on tableware.
Cause and troubleshooting Electronics have detected a fault. 1. Press the main
switch button for approx.
4 seconds. The appliance is reset and restarted. 2. If the problem occurs
again: Switch off the appliance. Pull out the mains plug or switch off the
fuse in
the fuse box. Wait at least 2 minutes. Switch on the fuse in the fuse box or
insert the
mains plug. Switch the appliance on. 3. If the problem occurs again: Contact
customer service.
“Customer Service”, Page 48
Tableware is placed too close together or basket is overfilled. 1. Arrange
tableware with sufficient space in between.
The spray jets must reach the surfaces of the tableware. 2. Avoid points of
contact.
Spray arm rotation of the lower spray arm is blocked. Arrange tableware so
that it does not obstruct
spray arm rotation.
Spray arm nozzles are blocked. Clean the Spray arms Page 40.
Filters are soiled. Clean the filters.
“Cleaning filters”, Page 39
Filters are inserted incorrectly and/or not engaged. 1. Insert the filters
properly.
“Filter system”, Page 39 2. Engage the filters. Washing programme selected too
weak.
43
enTroubleshooting
Fault
Cause and troubleshooting
Remnants of food on Select a more intensive washing programme.
tableware.
“Programmes”, Page 18
Tall narrow receptacles in corner areas are not rinsed adequately. Do not
position tall narrow receptacles at too great
an angle or in corner areas.
Top baskets on right and left are not set to same height. Set the upper basket
on the left and right to the
same height. “Top basket”, Page 21
Removable streaks Amount of rinse aid to be dispensed is set too high.
are present on glasses, glassware
Set the rinse aid system to a lower setting. “Setting the amount of rinse aid”, Page 26
with a metallic appearance and cutlery.
No rinse aid has been added. Add rinse aid.
“Adding rinse aid”, Page 26
Detergent residue is present in the final rinse. Lid of the detergent
dispenser is blocked by tableware items and will not open fully. 1. Arrange
tableware in the top basket tableware so
the tab collecting tray is not obstructed by tableware. “Arrange tableware”,
Page 30 Items of tableware are blocking the dispenser lid. 2. Do not place
tableware or fragrance dispensers in the tablet collecting tray.
Rust spots on cutlery. Cutlery is not sufficiently rust-resistant. Knife blades are often more severely affected. Use rust-resistant tableware.
Cutlery may also rust if washed together with rusting items. Do not wash rusting items.
Salt content in washing water is too high. 1. Remove any spilled special salt from the tub. 2. Screw the cap of the special salt dispenser on tight.
Detergent residue is present in the detergent dispenser or the tablet collecting tray.
Spray arms were blocked by tableware so detergent was not rinsed out. Check
that the spray arms are not blocked and can
rotate freely.
44
Troubleshootingen
Fault
Cause and troubleshooting
Detergent residue is present in the detergent dispenser or the tablet collecting tray.
Detergent dispenser was damp when detergent was added. Only add detergent to a
detergent dispenser when
dry.
Special salt refill indic- Insufficient special salt.
ator lights up.
Add Special salt Page 24.
Sensor does not detect special salt tablets. Do not use special salt tablets.
45
enTransportation, storage and disposal
19.1Clean wastewater pump
Large remnants of food or foreign bodies can block the waste water pump. As
soon as the rinsing water no longer drains properly, the waste water pump must
be cleaned.
WARNING Risk of injury! Sharp and pointed objects or fragments of glass may
block the waste water pump and cause injury. Remove any foreign bodies care-
fully. 1. Disconnect the appliance from the
power supply. 2. Remove the top and bottom bas-
ket. 3. Remove the filter system. 4. Scoop out any water.
Use a sponge if necessary. 5. Prise off the pump cover using a
spoon and grip it by the crosspiece.
6. Lift the pump cover inwards at an angle and remove.
a You can now reach the impeller with your hand.
7. Remove any remnants of food and foreign bodies in the area of the
impeller.
8. Insert the pump cover and press down .
2 1
a The pump cover clicks into position.
9. Install the filter system. 10.Insert the top and bottom basket.
20Transportation, storage and disposal
20.1Removing the appliance
1. Disconnect the appliance from the mains power supply.
2. Turn off the water tap. 3. Detach the drainage connection. 4. Detach the
drinking water connec-
tion. 5. Loosen any screws fastening the
appliance to cabinet parts. 6. Remove the base panel if fitted. 7. Pull the
appliance out carefully,
along with the hose behind it.
46
20.2Protect appliance from frost
If there is a risk of frost where the appliance will be standing, e.g. in a
holiday home, empty the appliance completely. Empty the appliance.
“Transporting the appliance”, Page 47
20.3Transporting the appliance
To avoid damage to the appliance, empty it before transporting. Note: Always
transport the dishwasher upright to prevent residual water getting into the
machine’s controls and damaging the appliance. 1. Remove tableware from the
appli-
ance. 2. Secure loose parts. 3. Switch on the appliance.
Page 32 4. Select the programme with the
highest temperature. “Programmes”, Page 18 5. Start the programme. Page 32 6.
To drain the appliance, terminate the programme after approx. 4 minutes.
“Terminate programme”, Page 33 7. Switch off the appliance. Page 33 8. Turn
off the water tap. 9. To empty the residual water out of the appliance, detach
the supply hose and let the water drain out.
Transportation, storage and disposalen
20.4Disposing of old appliance
Valuable raw materials can be reused by recycling.
WARNING Risk of harm to health! Children can lock themselves in the appliance,
thereby putting their lives at risk. With redundant appliances, unplug
the power cord. Then cut through the cord and damage the lock on the appliance
door beyond repair so that the appliance door will no longer close. 1. Unplug
the appliance from the mains. 2. Cut through the power cord. 3. Dispose of the
appliance in an environmentally friendly manner. Information about current
disposal methods are available from your specialist dealer or local authority.
This appliance is labelled in accordance with European Directive 2012/19/EU
concerning used electrical and electronic appliances (waste electrical and
electronic equipment – WEEE). The guideline determines the framework for the
return and recycling of used appliances as applicable throughout the EU.
47
enCustomer Service
21Customer Service
Detailed information on the warranty period and terms of warranty in your
country is available from our aftersales service, your retailer or on our
website. If you contact Customer Service, you will require the product number
(ENr.), the production number (FD) and the consecutive numbering (Z-Nr.) of
your appliance. The contact details for Customer Service can be found in the
enclosed Customer Service directory or on our website.
21.1Product number (E-Nr.), production number (FD) and consecutive numbering
(Z-Nr.)
You can find the product number (ENr.), the production number (FD) and the
consecutive numbering (Z-Nr.) on the appliance’s rating plate. The rating
plate is located inside the appliance door. Make a note of your appliance’s
details and the Customer Service telephone number to find them again quickly.
21.2AQUA-STOP guarantee
In addition to warranty claims against the seller under the purchase agreement
and in addition to our manufacturer’s warranty, we offer compensation under
the following conditions. ¡ If our Aqua-Stop system is defect-
ive and causes water damage, we will make good the damage for private users.
To ensure protection from water damage, the appliance must be connected to the
power supply.
48
¡ The liability guarantee is valid for the service life of the appliance.
¡ A claim can only be made under the guarantee if the appliance has been
correctly installed and connected with Aqua-Stop according to our
instructions; this also includes correctly fitting the AquaStop extension
(genuine accessory). Our guarantee does not cover defective supply lines or
fittings up to the Aqua-Stop connection on the tap.
¡ If your appliance is fitted with Aqua-Stop, you can in principle leave your
appliance unattended during operation and the tap turned on afterwards. The
tap only needs to be turned off if you are away from home for a long period,
e.g. on holiday for several weeks.
22Technical specifications
Technical specificationsen
Weight Voltage Power rating Fuse Water pressure
Inlet rate Water temperature
Capacity
Max.: 45 kg 220 – 240 V, 50 Hz or 60 Hz 2000 – 2400 W 10 – 16 A ¡ min. 50 kPa (0.5 bar) ¡ max. 1000 kPa (10 bar) Min. 10 l/min Cold water. Hot water max.: 60 °C 9 place settings
22.1Information regarding Free and Open Source Software
This product includes software components that are licensed by the copyright
holders as free or open source software. The applicable licence information is
stored on your home appliance. You can also access the applicable licence
information via your Home Connect app: “Profile -> Legal information ->
Licence Information”.1 You can download the licence information on the brand
product website. (Please search on the product website for your appliance
model and additional documents). Alternatively, you can request the relevant
information from ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str.
34, 81739 Munich, Germany. The source code will be made available to you on
request.
Please send your request to ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-
Wery-Str.34, 81739 Munich, Germany. Subject: ,,OSSREQUEST” The cost of
performing your request will be charged to you. This offer is valid for three
years from the date of purchase or at least as long as we offer support and
spare parts for the relevant appliance.
23Declaration of Conformity
BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect
functionality conforms to the essential requirements and other relevant
provisions of Directive 2014/53/EU. A detailed RED Declaration of Conformity
can be found online at www.bosch-home.com among the additional documents on
the product page for your appliance.
1 Depending on the appliance specifications 49
enDeclaration of Conformity
2.4 GHz band (24002483.5 MHz): Max. 100 mW 5 GHz band (51505350 MHz + 54705725 MHz): Max. 100 mW
BE BG CZ DK DE EE
IE
FR HR IT
CY LI
LV
LT
MT NL AT PL PT RO
SI
SE NO CH TR IS
UK (NI)
5 GHz WLAN (Wi-Fi): For indoor use only.
EL ES LU HU SK FI
AL
BA
MD
ME
MK
RS
UK
UA
5 GHz WLAN (Wi-Fi): For indoor use only.
50
Thank you for buying a Bosch Home Appliance!
Register your new device on MyBosch now and profit directly from:
· Expert tips & tricks for your appliance · Warranty extension options ·
Discounts for accessories & spare-parts · Digital manual and all appliance
data at hand · Easy access to Bosch Home Appliances Service
Free and easy registration also on mobile phones: www.bosch-home.com/welcome
Looking for help? You’ll find it here.
Expert advice for your Bosch home appliances, help with problems or a repair
from Bosch experts. Find out everything about the many ways Bosch can support
you: www.bosch-home.com/service Contact data of all countries are listed in
the attached service directory.
BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY www.bosch-
home.com
A Bosch Company
9001810247
9001810247 (030202) 442 E5 en
References
- Appliances.com
- Home Appliances Global Website | Bosch
- Home Appliances Global Website | Bosch
- BOSCH Service | Service worldwide
- Welcome to MyBosch
- Connect your household | Home Connect
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>