Hard Head 017286 Corner shelf User Manual
- June 4, 2024
- Hard Head
Table of Contents
Hard Head 017286 Corner shelf
OPERATING INSTRUCTIONS
Important!
Read the user instructions carefully before use. Save them for future
reference. (Translation of the original instructions)
SAFETY INSTRUCTIONS
Carefully read the instructions before use! Save them for future reference
- Place the corner unit on a level surface. Otherwise, this will compromise safety or the maximum supporting capacity.
- The maximum spot load is 175 kg per shelf.
- The weight must be evenly distributed on the shelves.
- Make sure not to exceed the maximum load per shelf, or for the whole unit.
- Do not put the corner unit in a room that is very humid because this can damage the shelves.
- Anchor the unit with a suitable wall bracket.
- Only use plugs and screws suitable for the type of wall and weight of the shelves. Plugs, screws, and tools for wall mounting are sold separately.
WARNING!
Make sure not to drill into water pipes or electric cables.
TECHNICAL DATA
- Weight 26.5 kg
- Size W90 x H180 x 090 cm
- Weight 26.5 kg
- Max load 175 kg/shelf
DESCRIPTION
- A stable storage unit designed for corner placement.
- Made of heavy-duty, zinc-plated sheet metal with five extra steel reinforced shelves made of MDF.
- Can be combined with Ju la’s storage shelf unit 017294 in a similar design.
ASSEMBLY
- Remove all the packaging material and check that all the parts are included.
- Check the corner unit for transport damage before assembling.
- Assemble the unit on a clean and level surface (e.g. carpet) to avoid damage.
- Wear safety gloves when assembling the unit.
- Use a rubber mallet to avoid damaging the material. FIG. 1
- Assemble the first shelf support as shown in the figure. FIG. 2
- Assemble the second and third shelf supports in the same way.
- Continue with the fourth and fifth shelf supports by using parts 7 and 8 as shown in the figure.
- Place the shelves (9) on each level.
- Fit the plastic feet (10 and 11) as shown in the figure. FIG. 3
- When the corner unit is fully assembled it should look like the figure. FIG. 4
Documents / Resources
| Hard
Head 017286 Corner
shelf
[pdf] User Manual
017286 Corner shelf, 017286, Corner shelf
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>