MOFOKEAY OBS-10W Outdoor Bluetooth Speakers Waterproof User Manual

: October 30, 2023
: MOFOKEAY

Table of Contents

MOFOKEAY OBS-10W Outdoor Bluetooth Speakers Waterproof
CONTROL PANEL
QUICK START
CONNECT TO A DEVICE
LISTENING
BATTERY
TROUBLESHOOTING
TECH SPECS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MOFOKEAY OBS-10W Outdoor Bluetooth Speakers Waterproof

CONTROL PANEL

Flame Light on/Off/Cycle Modes
Power Tum the Speaker On/Off
Bluetooth Activate Party Sync Mode
Plus Next Song/Volume Up
Minus Last Song/Volume Down
Play/Pause Play/Pause the Song
Battery Check the Battery Level

QUICK START

Speaker

Power on the ( )
Connect to a Bluetooth enabled device
Begin listening!

Light
Modes: Flicker IPulsing ISolid

Single click the Flame ( ) button to turn on & cycle through the modes.
Press and hold the Flame ( ) button to turn oﬀ the light without cycling through the modes.

CONNECT TO A DEVICE

Press and hold the power（） button.
Turn on the Bluetooth feature in your device’s settings
If you are connecting this speaker for the first time, you need to single click the Bluetooth ( ) but ton first, you will hear“ dongdong” , then you can find the Bluetooth device “SY126” on your list; If you have already connect ed this speaker, you don’t need to click Bluetooth ( ) button, it will connect automatically.
Select “SY126” from the list of devices.Once you hear the voice prompt “connected”,you are ready to begin streaming.This will be the “Parent” speaker.
Note:
If you are connecting multiple speakers for the first time, please follow the steps below to enter the PartySync Mode; if you have already connected, just turn on all speakers and wait for 5-10seconds to connect automatically
Turn on PartySync Mode on the Parent speaker by single clicking the Blue tooth button（）, you will hear “didi ”
Power on the second speaker and single click the Blue tooth button ( ) to turn on PartySync Mode, You will hear “didi ”.This speaker and all additional will be called the “Child”.
Wait for 5-10 seconds until you hear“ connected”, it means you enter the PartySync Mode successfully.
Repeat steps 5-7 for each additional “SY126” you would like to connect.

Tip: Disconnecting Speakers

Single click the Bluetooth ( ) button on any Child speaker to disconnect from the Parent.
Single click the Bluetooth ( ) but ton on the Parent speaker to disconnect all Child speakers.

Tip: Indicating the Parent Speaker
When multiple speakers are connected the LED lights of the control panel will slowly blink to indicate which speaker is the Parent

LISTENING

Audio can be adjusted from the Control Panel or directly on your device.

Plus(+)
- Single click = next song
- Press and hold =volume up
Minus (-)
- Single click = restart song
- Press and hold = volume down

BATTERY

When charging , the blue grid in the w orking state will increase gradually according to the amount of electricity; When discharging, the number of squares of the gray icon will gradually increase according to how much power is consumed. It is recommended to charge the speaker to 100% before each use to achieve the longest playtime. To charge , connect the included Type-C to USB Cable to a USB output. The lights on the battery level ( ) will flash while charging. Once fully charged, the lights will be always-on mode Recharging time: 5-6 Hours.

TROUBLESHOOTING

Connecting To Bluetooth
If ” SY126 ” does not show up in your Bluetooth menu, try

Turning the device’s Bluetooth off, wait 15 seconds, then turn it back on.
Turning the ” SY126 ” off, wait 15 seconds, then turn it back on
Forget “SY126” from all other near-by mobile devices

Sound Quality
If the audio being streamed to ” SY126 ” is skipping or has poor sound quality, try:

Moving the Main ” SY126 ” closer to the connected device.
Moving all paired ” SY126 ” Speakers closer to the Main Speaker.
Checking for interference between thedevice and the Main Speaker (walls, metal structures , ect).