CrazyCap 2 383CCW17 Self Purifying Water Bottle User Manual

CrazyCap 2 383CCW17 Self-Purifying Water Bottle

Manual Manuel Handbuch

Quick Start:

1. Charge CrazyCap fully.
2. Fill your bottle with water from any debris-free source. As long as the water is transparent so light can pass through it, you’re good to go.
3. Drink confidently once the sterilization is completed. CrazyCap can sterilize up to 99.99% of bacteria and viruses in your water bottles.
4. Top CenUy dovb~ tap the touchpad for Normal Mode (for water from the tap and public fountains). For Crazy Mode (water from lakes, ponds, etc.), tap CrazyCap turns on once.

Product Information:

CrazyCapTM2 is a water bottle cap that can sterilize up to 99.99% of bacteria and viruses are in your water bottles.
It has two modes: Normal Mode for water from the tap and public fountains, and Crazy Mode for water from lakes, ponds, and other natural sources. CrazyCapTM2 is rechargeable and can be charged using a USB cable.

Product Usage Instructions:

1. Charge CrazyCapTM2 fully using a USB cable before use.
2. Fill your water bottle with transparent water from any debris-free source.
3. Screw the CrazyCapTM2 onto the water bottle.
4. Tap the touchpad once for Normal Mode (for water from the tap and public fountains), or twice for Crazy Mode (for water from lakes, ponds, and other natural sources).
5. Normal Mode: the cap will sterilize the water for 60 seconds, after which you can drink it.
6. Crazy Mode: the cap will sterilize the water for 120 seconds, after which you can drink it.

Quick Start

• Step 1: Charge Charge CrazyCap fully.
• Step 2: Fill Fill your bottle with water from any debris-free source, As long as the water is transparent (so light can pass through it, you’re good to go.
• Step 3: Cap Screw on your CrazyCap and finger-tighten for a proper seal. CrazyCap fits our sport bottle perfectly, as well as most 9, 12- and 17-ounce cola-style bottles.
• Step 4: Tap Gently double-tap the touchpad for Normal Mode (for water from the tap and public fountains). For Crazy Mode (water from laices, ponds, etc.) tap 5 times
• Step 5: Drink Drink confidently once the sterilization is completed,
• Self-Cleaning: CrazyCap turns on once every 4 hours, for 20 seconds each time, to sterilize the bottle by shining the deep UV light on the inside surface of the bottle. This will ensure that your bottle does not accumulate mold, bacteria, viruses, or any harmful pathogens.

Charge your CrazyCap
Charging your CrazyCap is not rocket science, and the process is very convenient. A port-less USB charging cable is included with your CrazyCap.Simply place the charger on top of the cap, and it will fully charge in 4 hours or less. An active charging state is indicated by breathing Orange light. Once the cap is fully charged it will turn green.

Checking Battery Life
Tap the touch sensor once by fully resting the finger on the touch sensor. then an indicator light will glow to indicate the battery percentage, Green ight indicates a $50% battery charge Orange ight indicates a 25%699 battery charge and Red light indicates 12596 battery charge

Normal Mode Sterilization
Double-tap the touch sensor quickly to activate Normal mode. Activation will be indicated by breathing blue color on the Ring LED indicator. Make sure to rest your finger on the touch sensor completely for successful activation.

Crazy Mode Sterilization
Tap the touch sensor five times to activate Crazy mode, Activation will be indicated by breathing blue color on the Ring LED indicator. Make sure to rest your finger on the touch sensor completely for successful activation.

Surface Sterilization
CrazyCap™ 2 can be used for sterilizing cell phones, laptops, keyboards, toothbrushes, jewelry, etc. To use, simply turn on the Crazy mode, and point the deep UV light on to 4-5 inches away from the surface of interest. Make sure to cover the entire surface of the treatment by moving the light slowly through out the complete Crazy mode cycle. Surface sterilization efficacy is 5-square- inches-per-minutes

Warranty
“Lifetime warranty summary: Microlyscs warrants the included product and the accessory against the defects in materials and workmanship for its lifetime le., 10 years from the date of original purchase. Microlyscs does not warrant against normal wear and tear, nor damage caused by accident or abuse. Microlyses requires you to return your product before a warranty replacement is issued but may waive

Need help?

• Talk to an expert at
• hello@thecrazycap.com
• Scan the below code using your phone for video instructions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>