TRUPER 101398 Soldering Station Instructions

TRUPER 101398 Soldering Station

Product Information

The product is a soldering station designed for electronics soldering. The package includes a soldering iron holder, a cleaning sponge, and a power cable. The soldering station has an ignition switch (I – ON / 0 – OFF) and a power switch that lights up when turned on. The soldering iron has a replaceable tip, a resistance cover, and a resistance. The tool must be maintained by placing it in its holder when not in use and cleaning the soldering tip after each solder. The tool must not be immersed in water, and acidic solders should not be used as they can damage the welding tip or workpiece.

Product Usage Instructions

1. Put the soldering iron holder on its side on the soldering station and wet the cleaning sponge on the holder with water.

2. Place the soldering iron on the stand and place the soldering station on a solid, dry surface.

3. Connect the plug to a wall socket and switch the soldering station on using the ignition switch (I – ON / 0 – OFF). When turned on, the power switch lights up.

4. Reduce the temperature during breaks to save energy and prolong
   the life of the soldering tip. Wait about 5 or 8 minutes until the soldering tip reaches the proper temperature, check the temperature by touching the soldering tip with solder, if the solder melts easily you can start soldering.

5. Hot solder tip tinning with solder; Wipe off excess solder with the damp cleaning sponge.

6. Heat the part with the soldering iron.

7. Apply rosin-based solder to the part and melt it with the soldering iron.

8. Wait for the solder to cool and harden before moving the solder.

9. After finishing soldering, place the soldering iron back on the shelf and turn the soldering station off at the main switch.

10. Tip change and cleaning should only be done when the soldering iron is at room temperature.

INSTRUCTIVE

Electrical characteristics:

• 120 V ~ 60 Hz 48 W

Work temperature:

• From 160 ºC to 480 ºC
• The power cable has cable ties type: Z

NOTICE

• The power cord should not be replaced.
• In case of damage, the device must be discarded.

CAUTION

• Read the operating and maintenance instructions carefully before using your soldering iron. Misuse of the tool can cause serious accidents, such as: burns to the body and eyes, electric shocks, damage to health, damage to the tool, cause fire or explosions. Some TRUPER® soldering irons include solder. This solder may contain toxic components, do not breathe the smoke or dust that comes from this solder. The appliance is not intended for use by people (including children) whose physical, sensory or mental capacities are reduced, or by people without experience or knowledge, unless they are supervised by a person responsible for their safety or have received instructions. prior information on the use of the appliance. Children must be supervised to make sure they do not play with the appliance.

CAUTION

• During the first use, the soldering iron may produce smoke. This is because the grease used in its manufacture is burned. This is normal and should only last about 10 minutes. It is not harmful to the product or the user.

Operating instructions

• Put the soldering iron holder on its side on the soldering station, wet the cleaning sponge on the holder with water. Place the soldering iron on the stand. Place the soldering station on a solid, dry surface.
• Connect the plug to a wall socket and switch the soldering station on using the ignition switch (I – ON / 0 – OFF).
• When turned on, the power switch lights up.
• Always place the soldering iron on the holding rack when it is heating up or during soldering breaks. Make sure the welding contacts in the workplace are clean.

NOTICE

• Use only solders for electronics. Acidic solders can damage the welding tip or workpiece
• Adjust the desired soldering iron temperature with the adjustment knob. The color-coded zones are equal to the following temperatures:
• Yellow: 160 °C to 180 °C
• Light orange: 190 °C to 240 °C
• Dark orange: 250 °C to 390 °C
• Red: 400 °C to 480 °C
• Reduce the temperature during breaks, this saves energy and prolongs the life of the soldering tip. Wait about 5 or 8 minutes until the soldering tip reaches the proper temperature, check the temperature by touching the soldering tip with solder, if the solder melts easily you can start soldering.
• Hot solder tip tinning with solder; Wipe off excess solder with the damp cleaning sponge.
• Heat the part with the soldering iron.
• Apply rosin-based solder to the part and melt it with the soldering iron.
• Wait for the solder to cool and harden before moving the solder.
• Clean the soldering tip on the damp sponge after each solder.
• After finishing soldering, place the soldering iron back on the shelf and turn the soldering station off at the main switch.

NOTICE

• Do not file the soldering tip, or it will be damaged. Never touch the hot soldering tip. Allow soldering iron to cool after use. The soldering iron must not be immersed in water. During breaks, the soldering iron should be placed on the holding rack.

Tip replacement

NOTICE

Tip change and cleaning should only be done when the soldering
The tip can be changed or replaced simply by unscrewing the resistor cover. The station must be turned off and allowed to cool before and during this operation, as damage may occur if the system is left on without the tip inserted. After removing the tip, remove any rust dust that may have formed in the to area of the resistance cover. Be careful not to get dust in your eyes. Replace the tip and screw on the barrel retaining knurled nut using only hand pressure to tighten. Pliers should only be used to tighten the nut if it becomes loose when the iron is hot to avoid burning your fingers. Do not overtighten as this will damage the element.

Maintenance

This tool should be placed in its holder when not in use.

General cleaning

The outer casing of soldering iron or station can be cleaned with a damp cloth using small amounts of liquid detergent. Never immerse the unit in liquid or allow any liquid to enter the station casing. Never use solvents to clean the case.

Places to validate the warranty

• BAJA CALIFORNIA | TIJUANA BRANCH
• AV. LA ENCANTADA, LOT #5, EL FLORIDO II INDUSTRIAL PARK, ZIP 22244, TIJUANA, B.C.
• TEL.: 66 4969 5100

Guarantee Policy

This guarantee applies to:

• Model: CAU-48ES Code: 101398
• This product is guaranteed for 1 year. To make the warranty valid or purchase parts and components you must present the product in Corregidora 22, Col. Centro, Alc. Cuauhtémoc, CDMX C.P. 06060 or at the establishment where you purchased it, or at any
• Truper® Service Center is listed in the annex to the warranty policy and/or on www.truper.com.
• Transportation costs resulting from compliance with this warranty will be covered by Truper®. For questions or comments, call 800-690-6990. Made in China.
• Imported by Truper, S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257. 09-2021
• Stamp of the commercial establishment.
• Date of purchase:———————-

IMPORTANT:

• PLEASE ENSURE TO PRINT INSTRUCTION SHEET ON REGULAR PAPER 27,9 cm x 21,5 cm IN BLACK INK
• Fold the instructive sheet and put it inside the packaging.
• Confidential Information property of Truper, S.A. de C.V.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>