westminster 0958 Worlds Smallest RC Car Instruction Manual

0958 Worlds Smallest RC Car

Product Information

The 0958 WS RC Car is a remote control car that is compliant with the FCC radiation exposure limits for use in an uncontrolled environment. The transmitter should not be used in conjunction with any other antenna or transmitter.

Product Usage Instructions

1. Ensure that the remote control car and transmitter are both turned off before use.
2. Insert batteries into both the remote control car and transmitter, making sure to follow the correct polarity.
3. Turn on the remote control car first, followed by the transmitter.
4. Use the controls on the transmitter to maneuver the remote control car.
5. When finished using the remote control car, turn off the transmitter first, followed by the remote control car.
6. Remove batteries from both the remote control car and transmitter when not in use for extended periods of time to prevent damage from battery leakage.

CONTENTS / FUNCTION DIAGRAM

SETUP

1. Take out the remote control and RC Car from box. Slide the RC Car in the direction shown.
2. Use a Phillips screwdriver to remove the battery cover on the back of the remote control.
3. Have an adult install 2 “AA” batteries in the correct (+) (-) position and replace the battery compartment cover.

CHARGING INSTRUCTUCTIONS

1. Open the Charging Plug cover as illustrated and remove the Charging Plug.
2. Insert the Charging Plug into the Charging Jack on the bottom of the RC Car. The Charging Light lights up to indicate that charging is in progress.
3. The RC Car is fully charged when the Charging Light turns off. Charging Time : 6-7 minutes.

OPERATING INSTRUCTIONS

1. Move the Power Switch on the back of the Remote Control to the ON position. Move the ON/OFF switch on the RC Car to the ON position and place it on the ground.

2. The Signal Light lights up when any button  on the Remote Control is pressed.
   The RC Car moves forward and the headlights light up when the Forward button is pressed. The RC Car moves backward and the tail lights light up when the Reverse button is pressed.
   Pressing the Left/Right button on the remote control while the RC Car is moving forward or backward will cause the RC Car to turn. The Release Button on the Remote Control is used to release the RC Car which is locked onto the remote control in the box.

3. The Directional Adjustment is used to adjust the RC Car’s straight-line movement performance. Use the adjustment if the RC Car is not moving in a straight line.

0958 WS RC Car Instruction Artwork Revision Date: 13 April 2023
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>