Pressure Washer Pump Oil and Saver, Fittings and O-Rings Instructions
- October 30, 2023
- Pressure Washer
Table of Contents
Pressure Washer Pump Oil and Saver, Fittings and O-Rings
Product Information
Pressure Washers
A pressure washer is a cleaning device that uses high-pressure water to remove dirt and grime from surfaces. It is designed to clean outdoor surfaces such as patios, driveways, decks, and vehicles.
Pump Oil
Pump oil is a specially designed oil for pressure washer pumps. It is formulated to keep pumps cooler than regular oil and is suitable for all climates. It contains rust and corrosion additives, anti-wear additives, foam suppressant, and dispersant for system cleanliness. The AW-4085-0016 pump oil comes in 1-pint size with a convenient pour spout and resealable cap. It is sold in cases of 6 or 12.
Pump Saver
Pump saver is a product that provides longer pump life, prevents harmful build-up of hard water mineral deposits, preserves seals and pistons, and protects against freezing for safe, cold weather storage. It is suitable for use with all pressure washers and comes in a 16 oz. bottle. The AW-4070-0004 pump saver is sold in cases of 4.
Pump Winterizing Blowout Fitting
- The pump winterizing blowout fitting is designed to allow you to use an air chuck to clear the pump of any water remaining in the system to avoid damage from freezing. It is suitable for use with all pressure washers and has the product code AW-4070-0005.
High Temperature O-Rings
High temperature O-rings are used to ensure a tight fit and prevent leaks with quick connect sockets. The 3/8-inch high temp silicon O-ring with product code 25-0594 fits quick connect socket 17-0004 on hot water outlets, for hoses. The 1/4-inch high temp silicon O-ring with product code 25-0595 fits quick connect socket 17-0028 on wands.
Long Range Chemical Nozzle
- The long-range chemical nozzle is a quick-connect nozzle that attaches to the end of the wand. It operates at low pressure and has a range of 30-feet while drawing chemical. The product code for the long-range chemical nozzle is 18-0373.
Digital Hour Meter/Tachometer
- The digital hour meter/tachometer updates every 3 seconds and measures RPM up to 9,900. The product code for the digital hour meter/tachometer is 32-0416.
Product Usage Instructions
Before using the pressure washer, ensure that all accessories, fittings, and O-rings are properly installed and in good condition.
Pump Oil Usage Instructions
- Turn off the pressure washer and let it cool down.
- Locate the pump oil cap and remove it.
- Pour the pump oil into the reservoir using a funnel to avoid spills.
- Replace the pump oil cap and tighten it securely.
Pump Saver Usage Instructions
- Turn off the pressure washer and let it cool down.
- Disconnect the water supply hose from the pump inlet.
- Reconnect the water supply hose to the pump inlet.
Pump Winterizing Blowout Fitting Usage Instructions
- Turn off the pressure washer and let it cool down.
- Disconnect the water supply hose from the pump inlet.
- Remove the high-pressure hose from the pump outlet.
- Screw the pump winterizing blowout fitting into the pump outlet.
- Connect an air chuck to the fitting and blow out any remaining water from the system.
- Remove the pump winterizing blowout fitting and replace the high-pressure hose.
- Reconnect the water supply hose to the pump inlet.
High Temperature O-Rings Usage Instructions
- Turn off the pressure washer and let it cool down.
- Locate the quick connect socket on the hot water outlet or wand.
- Remove the old O-ring and replace it with a new high-temperature O-ring.
- Ensure that the O-ring is properly seated and that there are no leaks.
Long Range Chemical Nozzle Usage Instructions
- Attach the long-range chemical nozzle to the end of the wand.
- Fill the chemical container with the desired cleaning solution.
- Turn on the pressure washer and adjust the pressure to low.
- Squeeze the trigger to draw in the cleaning solution and apply it to the surface to be cleaned.
Digital Hour Meter/Tachometer Usage Instructions
- Attach the digital hour meter/tachometer to the spark plug wire of the engine.
- Turn on the pressure washer and allow it to run for a few minutes.
- Read the RPM on the display of the hour meter/tachometer.
Accessories
Pump Oil
- Specially designed for pressure washer pumps, it will keep pumps cooler than regular oil and is suitable for all climates.
AW-4085-0016
- 1-pint, 6 or 12 per case
- Convenient pour spout and resealable cap
- Contains rust and corrosion additives, anti-wear additives, foam suppressant and dispersant for system cleanliness
Pump Saver
- Provides longer pump life, prevents harmful build-up of hard water mineral deposits, preserves seals and pistons and protects against freezing for safe, cold weather storage.
AW-4070-0004
- 16 oz. bottle, 4 per case
- For use with all pressure washers
- Protects pressure washer when not in use
Pump Winterizing Blowout Fitting
- This fitting allows you to use an air chuck to clear the pump of any water remaining in the system to avoid damage from freezing.
AW-4070-0005
- For use with all pressure washers
Long Range Chemical Nozzle
18-0373
- Quick connects to the end of the wand
- Low pressure
- Has a range of 30-feet while drawing chemical
High Temperature O-Rings
- O-rings ensure a tight fit and prevent leaks with quick-connect sockets.
25-0594 3⁄8-inch high temp silicon
- Fits quick connect socket, 17-0004, on hot water outlets, for hoses
25-0595 1⁄4-inch high temp silicon
- Fits quick connect socket, 17-0028, on wands
Digital Hour Meter/Tachometer
32-0416
- Updates every 3 seconds
- RPM to 9,900