darkflash Ellsworth S11 Pro Tower CPU Cooler Installation Guide
- June 11, 2024
- darkflash
Table of Contents
darkflash Ellsworth S11 Pro Tower CPU Cooler
Part List
Instruction
Intel LGA 115x/1366/17xx
- Insert screw bolts to Intel 115x/ 1366/ 17xx backplate mounting holes.
- Install screw bolt washers to lock the screw bolts & backplate.
- Stick insulation pad on the backplate (Intel logo side).
- Make sure the screw bolt is lock in on the backplate.
- Install the green side backplate to motherboard.
- Remove cooler base protective film.
- Clean the CPU surface.
- Apply and spread the thermal paste to CPU evenly.
- Place the stand-off to backplate screw bolt
- Install the Intel cooler base mounting brackets.
- Align the Intel cooler base mounting brackets to backplate screw bolts, then place the air cooler on the CPU carefully.
- Using spring screw nuts to complete the air cooler and motherboard installation
- Install cooling fan using included fan clips.
- Connect cooling fan 4Pin PWM connector to motherboard CPU Fan socket.
INSTALLATION
AMD AM3/AM4
- Insert screw bolts to AMD AM3 or AM4 backplate mounting holes.
- Install screw bolt washers to lock the screw bolts & backplate.
- Stick insulation pad on the backplate (AMD logo side).
- Make sure the screw bolt is lock in on the backplate.
- Install the green side backplate to motherboard.
- Remove cooler base protective.
- Clean the CPU surface.
- Apply and spread the thermal paste to CPU evenly.
- Place the stand-off to backplate screw bolt.
- Install the AMD cooler base mounting brackets.
- Align the AMD cooler base mounting brackets to backplate screw bolts, then place the air cooler on the CPU carefully.
- Using spring screw pillar to complete the air cooler and m/b installation.
- Install cooling fan using included fan clips.
- Connect cooling fan 4Pin PWIM
Intel LGA 2011 (V3)/2066
- Remove cooler base protective.
- Clean the CPU surface.
- Apply and spread the thermal paste to CPU evenly.
- Install the Intel 2011/2066 cooler base mounting brackets.
- Align the Intel 2011/2066 cooler base mounting brackets to backplate screw bolts, then place the air cooler on the CPU carefully.
- Using spring screw pillar to complete the air cooler and m/b installation.
- Install cooling fan using included fan clips.
- Connect cooling fan 4Pin PWM connector to m/b CPU Fan socket.
S11 PRO & PLUS ONLY
- Connect the 3 Pin ARGB cable to fan cable socket.
DARKFLASH INFOTECH CO., LTD.
www.darkflash.com
Read User Manual Online (PDF format)
Loading......