WHITE SHARK Kimura PS5 Multi-Functional Cooling-Charging Stand User Manual

KIMURA
PSS MULTI-FUNCTIONAL
COOLING/CHARGING STAND
User Manual

Instructions:

Instal Step:

1. KIMURA multi-functional cooling stand is a new intelligent multi-functional cooling stand – not only it can lower the operating temperature of the PS5 console, but it also can charge PS5 controllers. It is compatible with both the P5 Disc and Digital Editions.

2. This stand has a built-in high-speed fan, a fan switch on the stand can adjust the fan speed to different levels – 1, 2, or 3 (1:slow speed, 2:middle speed, 3:high speed or Off) to lower the operating temperature of the console and extend the PS5’s lifespan.

3. The stand is equipped with a TYPE C – TYPE C cable. It can be powered from a Type-C port on the front of the P5 console, which also supports USB 2.0 data transfer without the need to purchase a separate power supply.

4. The stand can charge two P5 official controllers at the same time. There is a charge indicator light that shows a red light while charging; no light – on standby, and a blue light when fully charged (the blue light shows on 10 minutes after fully charged, and then it goes off) (Note: When the controller is not connected to the console, orange breathing light will be displayed when charging. If the controller is connected to the controller, only white light will be displayed. If the controller is being charged during the game, it will be always on blue and white light.)

5. The stand has 3 light modes:
   1.RGB light automatically changes color by breathing light mode
   2. Lock RGB light mode
   3.Tum off the light. You can press the RGB light switch to control it.

6. The stand is equipped with a game disc storage bracket to store six game discs, a headset holder to store headset or controller, etc. A dust flap cover at the top of the console can be dust-proof to store the remote control, charging cable, charging adapter and other game accessories.

7. There is a USB 2.0 data transfer port on the front of the product, which are mainly used to connect PS5 controller to play games, and provide 5V DC power output Since this USB 2.0 port is connected to the console for charging, wehn charging the two controllers on the dock, it is not recommended to connect a high-current charging bad to the USB 2.0 port, otherwise PS5 controllers or external device cannot be charged normally. The USB 2.0 pat can also charge USB charging products if there is no controller charging on the stand (but the port may not be compatible with some digital products).

8. Try not to remove the PS5 controllers during the charging process of this product. When the charging power of the PS5 controller reaches more than 80%, if you unplug the controller and then plug it in to charge at this time, the controller may not be charged due to the battery protection function of the controller. It will only continue to charge when the battery power of the controller is below 80%.

Specification

1. Input voltage: DC 5V

2. Input current: 3A

3. Controller charging current: DC 5.1 V 600mA x 2

4. Fan speed: 5000RPM ± 200 RPM/Min
   1″ speed 3500RPM ± 200RPM.
   2″ speed 4200RPM ± 200RPM
   3″ speed 5000RPM ± 200RPM)

5. Charging time: 3-4 hours

6. Size: 3208532mm

7. Material: ABS

8. Product accessories: Screws x 1,Headset hook x 1, Manual x

9. Weight: 435g

Notes:

1. Please place the product on a horizontal platform and a well-ventilated place, and use the built-in USB cable of the product.
2. This is ventilation cooling product, please do not cover any side vent and do not put anything into ventilation hole(Especially metal parts),otherwise it will damage the fan or base circuit, which will cause damage to the product.
3. Please clean this product by dry cbth,do not use water or alcohol,they may cause product short-circuit. Please shut off the connection of the product and the console power when you clean this product.
4. Please unplug 3 USB Hub and all input plug when this product not be used for a long time.
5. Do not store or use this product in damp or high temperature environment
6. If the product is drenched ,soaking in water or break, please stop using it and send it to the service agent to repair. Please Don not break down the product by yourself.
7. Please keep children away from this product.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>