defender CH-132 Car Holder User Manual
- June 10, 2024
- Defender
Table of Contents
defender CH-132 Car Holder
Installation of the holder on the air vent grille
- Insert the holder into the vent grill so that the deflector lamella is between the holder clips
- Rotate the holder base counterclockwise In order to open the clips
- Rotate the holder base clockwise to secure the holder to the deflector
Equipping the smartphone with the metal plate
-
Remove the protective film from the adhesive part of the plate
-
Stick the plate on the phone case
-
The plate can also be glued to the smartphone case. The case must be firm and smooth. The plate can not be attached to silicone cases
-
ATTENTION
Do not stick the plate over the NFC sensor! Do not stick the plate on your smartphone in case it has a wireless charging function! -
In case the smartphone has NFC or wireless charging functions, stick the plate only on/under the smartphone case or put It under the case (the plate will be fixed only by the case and will not interfere with the wireless charging
or NFC function without the case) Remove the protective film from the metal plate
Installation of the smartphone onto the holder
- Bring the smartphone close to the holder
CAR HOLDER
Terms and conditions of safe and efficient use of the product Usage precautions:
- Use the product for its intended purpose only.
- Do not disassemble. This product does not contain parts that are entitled to a self-sufficient repair. On the question of maintenance and replacement of a failed item apply to a dealer or Defender authorized service center. While receiving the product make sure that it is unbroken and that there are no freely moving objects inside the product.
- Keep away from children under the age of 3. May contain small parts.
- Keep away from humidity. Never immerse the product in liquids.
- Keep away from vibrations and mechanical stresses, which can cause mechanical damage of the product. In case of mechanical damage, no warranties are provided.
- Do not use in the presence of visual damage. Do not use it when the product is obviously defective.
- Do not use the product at temperatures below and above recommended temperatures {-30°C – +50°(), under the conditions of humidity evaporation, as well as in hostile environments.
- Do not put it into the mouth.
- Do not use the product for industrial, medical or manufacturing purposes.
- In case when shipment of the product was conducted in subzero temperatures, then before operating, the product should be kept in a warm placement {+16-25°C or 60-7rF) within 3 hours.
- Do not use the device while driving the vehicle, if it is diverted attention, and in other cases when the law obliges you to turn off the device.
Features
- Reliable fixation of the mobile device on the magnetic surface of the holder even when driving on bumpy roads
- Metal plates to hold a smartphone are included
Specification
- Purpose: for smartphones
- Mobile device fixation: magnet
- Rotation: 360°
- Mounting: on the air vent grill
- Material: ABS + metal
- Color: Black
IMPORTER : Defender Technology 00, Betooni str 11, 11415, Tallinn,
Estonia.
Manufacturer: China Electronics Shenzhen Company. Address: 35/F, Block A,
Electronics Science & Technology Building, Shennan Zhonglu, Shenzhen, China.
Date of manufacture: see on the package. The manufacturer keeps the right to
change package contents and specifications indicated in this manual. The
latest and detailed operation manual is available at www.defender-
global.com
Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>