LG 340-00621-01 Bluetooth Module Installation Guide
- June 10, 2024
- LG
Table of Contents
Bluetooth Module
Quick Installation Guide
Technical Data
| Technical Data | Bluetooth Module |
|---|---|
| Input Voltage | 5V |
| Self-Consumption | 0.3W |
| Size (Width HeightDepth) | 67.5mm24mm11mm |
| Operating Temperature Range | -25℃~60℃ |
| Operating Altitude | ＜4000m |
| Protection Degree | IP20 |
| Installation | Plug Type |
| Transmission Rate | UART: 115200bps |
| Frequency Range | 2.402GHz – 2.480GHz |
| Connection Distance | ≤10m |
Installation
Insert the Bluetooth into the COM port (USB-type communication port).
Commissioning
LGES PV Master for hybrid inverter
-
Make sure the Bluetooth indicator (yellow) is double flashing.
Attention: When plugging the module, press the RESET button to recognize the module. -
Turn on the Bluetooth function on your smart phone.
Attention: The Bluetooth module is designated for inverter’s commissioning. Please remove Bluetooth module as commissioning finished, as it is not waterproof.
Download and install the LGES PV Master.
Bluetooth Configuration
Open the LGES PV Master App and follow the steps below to complete
commissioning.
Step1: Click “ + Connect Device”.
Step2: Click “Inverter with Bluetooth”.
S tep3: Pull to refresh the inverter list on Device List page. Connect
to the right device by selecting the device name SOL-BLE.
Note:* represents the last eight digits of inverter’s SN.
Step4: To make sure inverter Bluetooth is connected to your smart phone
successfully, please make sure the system parameters shows up on Overview
page.
LG Energy Solution Australia Pty Ltd
Unit 12, 35 Dunlop Rd, Mulgrave, VIC 3170
T: 1300 178 064 [AEST Business hours]
www.lghomebattery.com/au
[email protected]