MBK GLO 2 In 1 Cleansing and Toning Facial Device User Manual

GLO 2 In 1 Cleansing and Toning Facial Device

Product Information: GLO Facial Tool

GLO is a multifunctional facial tool that integrates positive ion, negative ion, heat, vibration, red light, yellow light, and microcurrent (EMS) technologies. It is used for deep cleansing, product penetration, and skin tightening. The device has six levels of vibration intensity and a lithium battery that takes 3 hours to charge and lasts for up to 1 hour of usage. GLO comes with a brush, USB cable, and instruction manual and has a net weight of 127g.

Product Usage Instructions

1. Before using the device, read the instruction manual carefully and keep it for future reference.
2. Do not use the device on children, pregnant women, or patients with pacemakers.
3. To turn on the device, hold the on/off button down for 3 seconds. Do not use the unit while plugged in for charging.
4. For deep cleansing mode, apply cleanser before using the device.
5. When using the device for the first time, adjust the vibration to the lowest level and then increase it gradually if desired.
6. The device uses microcurrent technology, which may or may not be felt during use. This is normal.
7. To adjust the vibration intensity, press the ‘+’ and ‘-‘ keys. The red light will flicker to indicate the level of vibration intensity.
8. For troubleshooting, refer to the manual for possible reasons and solutions.
9. Clean the brush after each use and do not use alcohol or corrosive solutions to wipe the machine.
10. Charge the device frequently to maintain its battery life.

Specifications

• Product Name: GLO
• Product Model: MBKCB22
• Vibration Frequency: 5500 rpm
• Charging Voltage: DC 5V/1A
• Charging Time: 3 hours
• Working Time: 1 hour
• Lithium Battery: 3.7V 500mAh
• Vibration Intensity: 6 levels
• Product Dimension: 1206241mm
• Net Weight: 127g
• Package: Brush, USB cable, manual

The device comes with a 2-year warranty.

Introducing GLO!

Thank you for choosing this MBK facial tool. Please read this instruction manual carefully before using this unit and keep it for future reference.

Safety Instructions

1. This device should not be used in the following: children, pregnant women, patients with epilepsy, tumors and cancer patients, patients with cardiac pacemakers, implanted with cardiac defibrillators, and other devices implanted inside the body. If you have any medical questions, such as serious illness, epilepsy, etc., please consult your doctor before use.
2. People who are allergic to light or taking drugs that cause light sensitivity are prohibited to use this device.
3. Do not look directly at the light source, which may cause eye fatigue.
4. Do not use red light for a long time on the thyroid (neck position). Direct stimulation of red light may cause thyroid hyperplasia.
5. Do not use micro-current on the chest, this behavior may cause arrhythmia.
6. To avoid electric leakage, burns, fire, or damage, do not immerse the device in water.
7. Please don’t use this device if you have eczema.
8. Please wipe the device with anti-bacterial before using for the first time.
9. If you have sensitive skin, please test an area on your arm first.
10. When the power consumption is only 20 percent left, the red-light indicator will blink twice every 10 seconds to indicate that the device needs to be charged.
11. This product is charged by the USB cable. The red-light blinks during charging. It will go solid when the device is fully charged.
12. The product will automatically shut down when the battery has been drained.

Usage Instructions

1. Hold on/off button down for 3 seconds to turn on the device. Please do not use the unit while plugged in for charging.
2. Please apply cleanser for deep cleansing mode.
3. Please adjust the vibration to the lowest level when using it for the first time, and then adjust the settings higher if wanted.
4. The device uses microcurrent technology. You may or may not feel the actual microcurrent stimulation. This is normal.

Device Introduction

This multifunctional device is used for deep cleansing, product penetration and skin tightening. It integrates positive ion, negative ion, heat, vibration, red light, yellow light and microcurrent (EMS). Please use cleanser when using cleansing side and a conductive product when using the microcurrent/LED mode.

Functions

• Positive ion : The positive ion mode helps remove residue and aids in deep cleansing.
• Negative ion : The negative ion mode helps with product penetration.
• Warm : The heat helps to open the pores for better product penetration and removal of residue on the skin.
• Vibration : This mode will help release residue in the pores. It stimulates (awakens) the skin and aids in relaxing and toning.
• Red light : 630nm-635nm, red light penetrates to the dermis, promoting growth of collagen to maintain the elasticity and water content of skin.
• Yellow light : 590nm-595nm, yellow light can accelerate the blood circulation, activate cells, promote cell growth, and improve pigmentation.
• EMS : Electric Muscle Stimulation (microcurrent), the device mimics brainwave signals to stimulate the muscles for a toning effect.

Product Diagram Operation and Usage

1. The cleansing vibration has six intensities. Press ‘+’ and ‘-’ key to adjust the vibration. Every press, the red light will flick moving from lowest level and to highest level.
2. Each time you press on/off button it switches the mode. The red-light flashes once.
3. Fingers must be touching the silver ionic strip around the edge to complete the electric circle.

Cleansing Mode with Silicone Brush Head
Please remove base makeup before using the device in cleansing. Apply cleanser to face making sure there is plenty of moisture (water) on the face. The device glides over the face better with moisture. When you turn the device on it will default to level 1 vibration. Chose the suitable vibration using the ‘+’/ ‘-‘key. Cleanse the face for about 2 minutes using circular movements.

Cleansing Mode with Smooth Metal Side: positive ion, vibration, heat, and red light.
Take the magnetic ring off the unit, cover with a cotton pad saturated with toner or makeup remover then place ring back on unit. A long press on the on/off key turns the unit on. Press + or – for intensity level. Make sure fingers are touching the ionic strip to close current. Move around the face in circular motions for deep cleansing.

Infusing Mode with Smooth Metal Side: negative ion, vibration, heat, and yellow light. This mode is for product penetration.
Apply skin care products on the face. A long press the on/off key turns on the device. Then two short presses on the on/off will put the unit in infusion mode. Press + or – for intensity level. Make sure fingers are touching the ionic strip to close current. Use upward and outward movements.

Firming Mode with Smooth Metal Side: EMS & red light. This mode is to firm and stimulate/massage the skin.
Apply skin care products on the face. A long press the on/off key turns on the device. Then three short presses on the on/off will put the unit in firming mode. Press + or – for intensity level. Make sure fingers are touching the ionic strip to close current. Use upward and outward movements. There is no vibration in this mode so you will not hear anything.

Troubleshooting

Unable to turn on

| Not long press on/off key for 3

seconds

| ****

Be sure to press the on/off key for 3 seconds

Under charging

| ****

Remove USB, re-start the device

Low battery

| ****

Connect to USB and charge

Unable to charge

| USB does not connect to the

adapter

| Make sure USB cable is fully connected to

the adapter

USB does not insert to the device

| ****

Fully insert USB cable to the device

USB cable broken

| ****

Replace another USB cable

Strong tingling feel

| ****

Too high level of EMS

| ****

Adjust to lower EMS intensity

Lack of makeup remover or toner

| ****

Replenish makeup remover or toner

No vibration| Not touching the ionic stripe| Make sure to touch the ionic stripe while

using

Dry skin| Apply skincare products to face

Cleaning and maintenance

Please clean the brush after using. Please don’t apply alcohol, nail remover and the other corrosive solution to wipe the machine. It may cause product failure, cracking parts or discoloration, etc. Please charge this device frequently to maintain the life of the product.

Specifications

Product Name

Produce Model

| GLO

MBKCB22

---|---
Vibration Frequency| 5500 rpm
Charging Voltage| DC 5V/1A
Charging Time| 3 hours
Working Time| 1 hour
Lithium Battery| 3.7V 500mAh
Vibration Intensity| 6 levels
Produce Dimension| 1206241mm
Net Weight| 127g
Package| Brush, USB cable, manual
|

This device has a 2-year warranty!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>