makita XBU05 Cordless Blower Instruction Manual

: June 10, 2024
: Makita

makita XBU05 Cordless Blower

makita-XBU05-Cordless-Blower-product

Product Information

The XBU05, XBU06, and ADBU05 are models of a cordless air blower manufactured by the company. The product is designed to provide powerful air flow for cleaning outdoor spaces such as patios, driveways, and lawns. The air blower is powered by a DC 18V battery and has a net weight of 1.6-2.1 kg (3.5-4.6 lbs). The product comes with a nozzle and a garden nozzle for different types of air flows. The maximum air speed of the air blower is 0-98 m/s (0-219 MPH) with a maximum air volume of 0-3.2 m3/min (0-113 cu.ft./min). The overall length of the product varies from 517 mm (20-3/8) to 861 mm (34) depending on the model.

Product Usage Instructions

Before using the product, it is important to read all the safety warnings, instructions, illustrations, and specifications provided with the power tool. Failure to follow the instructions may result in electric shock, fire, and/or serious injury. Keep all warnings and instructions for future reference.

Charging

Insert the battery cartridge into the charger and plug it into a suitable power source. The recommended charger is DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / DC18SH. Wait for the battery to charge fully before using it with the air blower.

Assembly

Attach the nozzle or garden nozzle to the air blower depending on the type of airflow required. Make sure the nozzle is securely attached to the air blower before use.

Operation

Ensure that the battery is fully charged before using the air blower. Press the power button to start the air blower. Direct the air flow towards the area that needs to be cleaned. Adjust the air speed and volume as required using the control buttons on the air blower.

Safety

Keep the work area clean and well-lit to avoid accidents. Do not operate the air blower in explosive atmospheres or expose it to rain or wet conditions. Keep children and bystanders away from the work area while operating the air blower. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. Use an extension cord suitable for outdoor use if operating the air blower outdoors. If operating the air blower in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Power tools can produce electromagnetic fields (EMF) that are not harmful to the user, but users of pacemakers and other similar medical devices should
contact the maker of their device and/or doctor for advice before operating this power tool.

SPECIFICATIONS

Model:	XBU05	ADBU05	XBU06
Capacities	Air volume	0 – 3.2 m3/min (0 – 113 cu.ft./min)
Air speed (average)	0 – 81 m/s (0 – 181 MPH)	0 – 56 m/s (0 – 125 MPH)
Air speed (max.)	0 – 98 m/s (0 – 219 MPH)	0 – 68 m/s (0 – 152 MPH)
Overall length	517 mm (20-3/8″) *1	861 mm (34″) *2
Rated voltage	D.C. 18 V
Net weight	With nozzle	1.6 – 2.1 kg (3.5 – 4.6 lbs)	–
With garden nozzle	–	1.6 – 2.1 kg (3.5 – 4.6 lbs)

With nozzle and battery cartridge, and without dust bag.
With garden nozzle and battery cartridge, and without dust bag.
- Due to our continuing program of research and development, the specifications herein are subject to change without notice.
- Specifications may differ from country to country.
- The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge| BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
---|---
Charger| DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / DC18SH

Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and chargers may cause injury and/or fire.

Recommended cord connected power source

Portable power pack	PDC01

The cord connected power source(s) listed above may not be available depending on your region of residence.
Before using the cord connected power source, read instruction and cautionary markings on them.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
Power tools can produce electromagnetic fields (EMF) that are not harmful to the user.
However, users of pacemakers and other similar medical devices should contact the maker of their device and/or doctor for advice before operating this power tool.

Personal Safety

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or med-ication. A moment of inattention while operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewel-lery or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
Always wear protective goggles to protect your eyes from injury when using power tools. The goggles must comply with ANSI Z87.1 in the USA.
It is an employer’s responsibility to enforce the use of appropriate safety protective equipment by the tool operators and by other persons in the immediate working area.

Power tool use and care

Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjust-ments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of chil-dren and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If dam-aged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these instructions, tak-ing into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
When using the tool, do not wear cloth work gloves which may be entangled. The entangle-ment of cloth work gloves in the moving parts may result in personal injury.

Battery tool use and care

Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Use power tools only with specifically desig-nated battery packs. Use of any other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery termi-nals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If con-tact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or tool that is dam-aged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or tem-perature above 130 °C may cause explosion.
Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instruc-tions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

Service

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
Follow instruction for lubricating and chang-ing accessories.
Do not modify or attempt to repair the appli-ance or the battery pack except as indicated in the instructions for use and care.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.
WARNING – To reduce the risk of fire, electric shock, or injury:

Do not leave appliance when battery fitted. Remove battery from appliance when not in use and before servicing.
Do not expose to rain. Store indoors.
Do not allow to be used as a toy. Close attention is necessary when used by or near children.
Use only as described in this manual. Use only manufacturer’s recommended attachments.
Do not use with damaged battery. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
Use extra care when cleaning on stairs.
Use only the charger supplied by the manufac-turer to recharge.
Do not use to pick up flammable or combusti-ble liquids, such as gasoline, or use in areas where they may be present.
Do not pick up anything that is burning or smok-ing, such as cigarettes, matches, or hot ashes.
Do not use without dust bag in place when collecting dust.

SAVE THESE INSTRUCTIONS.
This appliance is intended for household use.

Cordless Blower Safety Instructions

Preparation

Always wear substantial footwear and long trousers while operating the machine.
Do not wear loose clothing or jewellery that can be drawn into the air inlet. Keep long hair away from the air inlets.
Always use protective goggles, a cap and mask when using the machine. Ordinary eye or sun glasses are NOT safety glasses.
To prevent dust irritation the wearing of a face mask is recommended.
While operating the machine, always wear non-slip and protective footwear. Non-skid, closed-toed safety boots and shoes will reduce the risk of injury.

Operation

Never operate the machine while people, espe-cially children, or pets are nearby.
Switch off the machine and remove the battery cartridge and make sure that all moving parts have come to a complete stop
- whenever you leave the machine.
- before clearing blockages.
- before checking, cleaning or working on the machine.
- if the machine starts to vibrate abnormally.
- whenever you convert the machine from blower to vacuum, and vice versa.
Operate the machine only in daylight or in good artificial light.
Do not overreach and keep proper balance and footing at all times.
Never blow debris in the direction of bystanders.
Operate the machine in a recommended posi-tion and on a firm surface.
Do not operate the machine at high places.
Never point the nozzle at anyone in the vicinity when using the machine.
Never block suction inlet and/or blower outlet.
- Be careful not to block suction inlet or blower outlet with dust or dirt when oper-ating in dusty area.
- Do not use nozzles other than the nozzles provided by Makita.
- Do not use the blower to inflate balls, rubber boat or the similar.
Do not operate the machine near open window, etc.
Operating the machine only at reasonable hours is recommended – not early in the morning or late at night when people might be disturbed.
Using rakes and brooms to loosen debris before blowing is recommended.
If the machine strikes any foreign objects or should start making any unusual noise or vibration, immediately switch off the machine to stop it. Remove the battery cartridge from the machine and inspect the machine for damage before restarting and operating the machine. If the machine is damaged, ask Makita Authorized Service Centers for repair.
Do not insert fingers or other objects into suction inlet or blower outlet.
Prevent unintentional starting. Ensure the switch is in the off-position before inserting battery cartridge, picking up or carrying the machine. Carrying the machine with your fin-ger on the switch or energizing the machine that has the switch on invites accidents.
Never blow or vacuum dangerous materials, such as nails, fragments of glass, or blades.
Do not operate the machine near flammable materials.
Avoid operating the machine for a long time in low temperature environment.
Always use the dust bag when collecting dust, chips and the like.
Do not collect still smoldering cigarette ashes, freshly cut metals shavings, screws, nails and the like.

Maintenance and storage

Keep all nuts, bolts and screws tight to be sure the machine is in safe working condition.
If the parts are worn or damaged, replace them with parts provided by Makita.
Store the machine in a dry place out of the reach of children.
When you stop the machine for inspection, servicing, storage, or changing accessory, switch off the machine and make sure that all moving parts come to a complete stop, and remove the battery cartridge. Cool down the machine before making any work on the machine. Maintain the machine with care and keep it clean.
Always cool down the machine before storing.
When you lift the machine, be sure to bend your knees and be careful not to hurt your back.

Battery tool use and care

Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the machine. Carrying the machine with your finger on the switch or energizing machine that have the switch on invites accidents.
Disconnect the battery pack from the machine before making any adjustments, changing accessories, or storing machine. Such preven-tive safety measures reduce the risk of starting the machine accidentally.
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Use machines only with specifically desig-nated battery packs. Use of any other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery termi-nals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If con-tact accidentally occurs, flush with water. If liquid contacts eyes, seek medical help. Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or machine that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
Do not expose a battery pack or machine to fire or excessive temperature. Exposure to fire or temperature above 130°C (265°F) may cause explosion.
Follow all charging instructions and do not charge the battery pack or machine outside of the temperature range specified in the instruc-tions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
Do not modify or attempt to repair the machine or the battery pack except as indicated in the instructions for use and care.

Electrical and battery safety

Do not dispose of the battery(ies) in a fire. The cell may explode. Check with local codes for possible special disposal instructions.
Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.
Do not charge battery in rain, or in wet locations.
Do not charge the battery outdoors.
Do not handle charger, including charger plug, and charger terminals with wet hands.
Avoid dangerous environment. Don’t use the tool in dump or wet locations or expose it to rain. Water entering the tool will increase the risk of electric shock.

Service

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.
WARNING: Use of this product can create dust containing chemicals which may cause respiratory or other illnesses. Some examples of these chemicals are compounds found in pesti-cides, insecticides, fertilizers and herbicides.
Your risk from these exposures varies, depend-ing on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Symbols

The followings show the symbols used for tool.

volts
direct current

Important safety instructions for battery cartridge

Before using battery cartridge, read all instruc-tions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.
Do not disassemble or tamper with the battery cartridge. It may result in a fire, excessive heat, or explosion.
If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion.
If electrolyte gets into your eyes, rinse them out with clear water and seek medical atten-tion right away. It may result in loss of your eyesight.
Do not short the battery cartridge:
Do not touch the terminals with any con-ductive material.
Avoid storing battery cartridge in a con-tainer with other metal objects such as nails, coins, etc.
Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow, overheating, possible burns and even a breakdown.
Do not store and use the tool and battery car-tridge in locations where the temperature may reach or exceed 50 °C (122 °F).
Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire.
Do not nail, cut, crush, throw, drop the battery cartridge, or hit against a hard object to the battery cartridge. Such conduct may result in a fire, excessive heat, or explosion.
Do not use a damaged battery.
The contained lithium-ion batteries are subject to the Dangerous Goods Legislation require-ments.
For commercial transports e.g. by third parties, forwarding agents, special requirement on pack-aging and labeling must be observed.
For preparation of the item being shipped, consult-ing an expert for hazardous material is required. Please also observe possibly more detailed national regulations.
Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in the packaging.
When disposing the battery cartridge, remove it from the tool and dispose of it in a safe place. Follow your local regulations relating to disposal of battery.
Use the batteries only with the products specified by Makita. Installing the batteries to non-compliant products may result in a fire, exces-sive heat, explosion, or leak of electrolyte.
If the tool is not used for a long period of time, the battery must be removed from the tool.
During and after use, the battery cartridge may take on heat which can cause burns or low temperature burns. Pay attention to the han-dling of hot battery cartridges.
Do not touch the terminal of the tool imme-diately after use as it may get hot enough to cause burns.
Do not allow chips, dust, or soil stuck into the terminals, holes, and grooves of the battery cartridge. It may cause heating, catching fire, burst and malfunction of the tool or battery car-tridge, resulting in burns or personal injury.
Unless the tool supports the use near
high-voltage electrical power lines, do not use the battery cartridge near high-voltage electri-cal power lines. It may result in a malfunction or breakdown of the tool or battery cartridge.
Keep the battery away from children.

SAVE THESE INSTRUCTIONS.

CAUTION: Only use genuine Makita batteries. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger.

Tips for maintaining maximum battery life

Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power.
Never recharge a fully charged battery car-tridge. Overcharging shortens the battery service life.
Charge the battery cartridge with room tem-perature at 10 °C – 40 °C (50 °F – 104 °F). Let a hot battery cartridge cool down before charging it.
When not using the battery cartridge, remove it from the tool or the charger.
Charge the battery cartridge if you do not use it for a long period (more than six months).

ASSEMBLY

CAUTION: Always be sure that the machine is switched off and the battery cartridge is removed before carrying out any work on the machine.

Assembly for blowing

Installing or removing the nozzle
Optional accessory for XBU06
Align the protrusions on the nozzle with the grooves on the main unit, then insert the nozzle into the main unit, and then turn it to lock it into place.

Nozzle

To remove the nozzle, perform the installation proce-dure in reverse.

Installing or removing the garden nozzle
Optional accessory for XBU05 / ADBU05
Align the protrusions on the garden nozzle with the grooves on the main unit, then insert the garden nozzle into the main unit, and then turn it to lock it into place.

Garden nozzle

To remove the garden nozzle, perform the installation procedure in reverse.

Installing or removing the long nozzle
Optional accessory for XBU05 / XBU06 / ADBU05 Install the long nozzle in the same way as the nozzle. To remove the long nozzle, perform the installation procedure in reverse.

Installing or removing the tapered nozzle
Optional accessory for XBU05 / XBU06 / ADBU05
Attach the tapered nozzle to the nozzle, and then install the nozzle to the main unit. To remove the tapered noz-zle, perform the installation procedure in reverse.

Assembly for vacuuming

Installing or removing the nozzle
Optional accessory for XBU06
Align the protrusions on the nozzle with the grooves on the main unit, then insert the nozzle into the main unit, and then turn it to lock it into place.

Nozzle

To remove the nozzle, perform the installation procedure in reverse.

Installing or removing the dust bag
Optional accessory for XBU05 / XBU06 / ADBU05
Align the protrusions on the joint of dust bag with the grooves on the main unit, then insert the joint into the main unit, and then turn it to lock it into place.

1. Joint 2. Dust bag

To remove the dust bag, perform the installation proce-dure in reverse.

Installing or removing the flexible hose set
Optional accessory for XBU05 / XBU06 / ADBU05 Attach the joint, hose, pipe, and sash nozzle to the main unit in order.

1. Joint 2. Hose 3. Pipe 4. Sash nozzle

To remove the flexible hose set, perform the installation procedure in reverse.

FUNCTIONAL DESCRIPTION

CAUTION: Always be sure that the machine is switched off and the battery cartridge is removed before adjusting or checking function on the machine.

Installing or removing battery cartridge

CAUTION: Always switch off the machine before installing or removing of the battery cartridge.
CAUTION: Hold the machine and the battery cartridge firmly when installing or removing bat-tery cartridge. Failure to hold the machine and the battery cartridge firmly may cause them to slip off your hands and result in damage to the machine and battery cartridge and a personal injury.
CAUTION: Always install the battery cartridge fully until the red indicator cannot be seen. If not, it may accidentally fall out of the machine, causing injury to you or someone around you.
CAUTION: Do not install the battery cartridge forcibly. If the cartridge does not slide in easily, it is not being inserted correctly.
1. Red indicator 2. Button 3. Battery cartridge

To remove the battery cartridge, slide it from the machine while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Insert it all the way until it locks in place with a little click. If you can see the red indicator on the upper side of the button, it is not locked completely.

Indicating the remaining battery capacity

Only for battery cartridges with the indicator

1. Indicator lamps 2. Check button

Press the check button on the battery cartridge to indi-cate the remaining battery capacity. The indicator lamps light up for a few seconds. makita-
XBU05-Cordless-Blower-fig 8

NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity.
NOTE: The first (far left) indicator lamp will blink when the battery protection system works.

Machine/battery protection system

The machine is equipped with a machine/battery protection system. This system automatically cuts off power to the motor to extend machine and battery life. The machine will automatically stop during operation if the machine or battery is placed under one of the fol-lowing conditions:

Overload protection
When the machine or battery is operated in a manner that causes it to draw an abnormally high current, the machine automatically stops without any indication. In this situation, turn the machine off and stop the appli-cation that caused the machine to become overloaded. Then turn the machine on to restart.

Overheat protection
When the machine or battery is overheated, the machine stops automatically. In this case, let the machine and battery cool before turning the machine on again.

Overdischarge protection
When the battery capacity is not enough, the machine stops automatically. In this case, remove the battery from the machine and charge the battery.

Switch action

WARNING: Before installing the battery car-tridge into the machine, always check to see that the switch trigger actuates properly and returns to the “OFF” position when released.

1. Switch trigger

To start the machine, simply pull the switch trigger. The speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop.

NOTICE: If the machine has been operated con-tinuously until the battery has become empty, rest the machine for at least 15 minutes before operat-ing the machine with a fresh battery.
NOTE: When you start pulling the switch trigger, elec-tronic sound may be emitted from the machine, but it does not mean a malfunction of the machine.

Speed adjusting dial

1. Speed adjusting dial

The speed can be changed by turning the speed adjusting dial to a given number setting from 1 to 3. Higher speed is obtained when the dial is turned in the direction of number 3. And lower speed is obtained when it is turned in the direction of number 1. Refer to the table for the relationship between the num-ber settings on the dial and the speed.

Number	Speed
3	High
2	Medium
1	Low

NOTICE: When turning the dial, be sure to com-pletely release the switch trigger. Otherwise, the machine may be damaged.

OPERATION

CAUTION: Do not place the machine on the ground while it is switched on. Sand or dust may enter from suction inlet and cause a malfunction or personal injury.

Blower operation

CAUTION: When performing the blower operation, be sure to remove the dust bag from the machine, and attach the nozzle in place for blowing.
Hold the machine firmly with a hand and perform the blowing operation by moving it around slowly. When blowing around building, big stone or vehicle, direct the nozzle away from them. When performing an operation in a corner, start from the corner and then move to wide area.

For XBU05 / ADBU05

For XBU06

Vacuuming operation

CAUTION: When performing the vacuuming operation, be sure to attach the dust bag and nozzle in place to the machine.
CAUTION: Check the dust bag frequently for wear or deterioration.
CAUTION: Be sure to fasten the fastener of the dust bag before operating the machine.
CAUTION: Always switch off the machine before opening or fastening the fastener of the dust bag.
NOTICE: When performing the vacuuming oper-ation, do not use the garden nozzle. The materials sucked may be clogged, and cause a malfunction of the machine.
NOTICE: Do not allow wet materials, such as wet leaves, and foreign materials, such as large wood chips, metals, glass, pebbles, etc., to be sucked into the machine. Otherwise, a malfunction may occur.
NOTICE: Empty the dust bag before it becomes full. Otherwise, a malfunction may occur.

Hold the machine with both hands. While operating the machine, adjust the switch trigger so that the suction force is appropriate for the work location and conditions.

Empty the dust bag before it becomes too full by remov-ing the dust bag from the machine, and then removing the fastener.

1. Fastener

MAINTENANCE

CAUTION: Always be sure that the machine is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.

Cleaning the machine

Clean the machine by wiping off dust with a dry cloth or one dipped in soapy water and wrung out.

NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result.

Remove dust or dirt from the suction inlets.

1. Suction inlet

TROUBLESHOOTING

Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the man-ual, do not attempt to dismantle the machine. Instead, ask Makita Authorized Service Centers, always using Makita replacement parts for repairs.

State of abnormality| Probable cause (malfunction)| Remedy
---|---|---
Motor does not run.| Battery cartridge is not installed.| Install the battery cartridge.
Battery problem (under voltage)| Recharge the battery. If recharging is not effective, replace battery.
The drive system does not work correctly.| Ask your local authorized service center for repair.
Motor stops running after a little use.| Battery’s charge level is low.| Recharge the battery. If recharging is not effective, replace battery.
Overheating.| Stop using the machine to allow it to cool down.
The machine does not reach the maximum speed.| Battery is installed improperly.| Install the battery cartridge as described in this

manual.

Battery power is dropping.| Recharge the battery. If recharging is not effective, replace battery.
The drive system does not work correctly.| Ask your local authorized service center for repair.
Abnormal vibration:

stop the machine immediately!

| The drive system does not work correctly.| Ask your local authorized service center for repair.
Motor cannot stop:

Remove the battery immediately!

| Electric or electronic malfunction.| Remove the battery and ask your local authorized

service center for repair.

OPTIONAL ACCESSORIES

CAUTION: These accessories or attachments are recommended for use with your Makita prod-uct specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.

If you need any assistance for more details regard-ing these accessories, ask your local Makita Service Center.

Nozzle
Garden nozzle
Dust bag
Long nozzle
Tapered nozzle set
Flexible hose set
Makita genuine battery and charger

NOTE: Some items in the list may be included in the product package as standard accessories. They may differ from country to country.

MAKITA LIMITED WARRANTY

Please refer to the annexed warranty sheet for the most current warranty terms applicable to this product. If annexed warranty sheet is not available, refer to the warranty details set forth at below website for your respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com

Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi 446-8502 Japan
www.makita.com