NGK RGB-128AS RGB Soft Light Instruction Manual

: June 10, 2024
: NGK

Table of Contents

Product structure introduction
Main features
Power on/off
Function adjustment settings
APP Operation guide
Product size
Product parameter
Cautions
FCC Warning
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NGK RGB-128AS RGB Soft Light Instruction Manual

Safety Notice:
In order to prevent any damage to your products or the safety of users, please read the following safety precautions before using and keep the information in this manual, so that all users of this product can access it at any time.

Product structure introduction

Shading sheet
Light-emitting panel
Battery compartment
Battery removal button
TFT display
MODE button
Fn1 button
Fn2 button
Fn3 button
Fn4 button
Power switch
DC input socket
SET function knob
Fixing bracket removal button
Angle adjustment knob
Bracket fixing knob
Fixing the bracket

Main features

This product is an RGB soft light with 120 RGBWW lamp beads in a 5050 package, and adopts the latest LED driving technology to make the color more rich, the illuminating range is larger, the brig-htness is stronger, and the color temperature adjustment range is wider. Provide sufficient, accurate and stable light source for dimming. A 1.77-inch TFT color display, with five function buttons and a function knob, makes the function adjustment of the product more intuitive and convenient. Feature a four-page shade for adjustable light coverage. Equipped with two battery compartments and an adapter interface, the power supply mode is selected by a three-speed rocker switch, which makes the product work longer. TFT color screen display, interactive operation interface. 49 types of EFFECTS presets, each type of EFFECTS can be customized parameters. There have Bluetooth APP control version to choose from.

Power on/off

Use battery power
At the same time, insert two NP-F series batteries into the battery compartment of the photography light in the correct direction. Flip the power switch to the I terminal, the LCD screen display lights up, and the photography light will turn on normally.
Use external adapter for power supply
Use an external adapter to supply power. Connect the 15V 4A adapter that matches the product to the adapter DC socket of the photography light, and connect the adapter to the power supply. Flip the power switch to the II end, the LCD screen display lights up, and the photography light will turn on normally.
Power off
In the power-on state, turn the power switch to end 0, the LCD screen display goes off, and the camera light turns off.

Function adjustment settings

Control panal

Serial number	Name	Descriptions
1	MODE	Function keys MODE, White light (CCT), Color light (HSI), scenes

(EFFECTS) mode selection.
2| Fn1| Function key Fnl, press it to enter the menu or parameter item displayed on the left screen
3| Fn2| Function key Fn2, when pressed, enter the menu or parameter item displayed on the left screen
4| Fn3| Function key Fn3, press it to enter the menu or parameter item displayed on the right screen
5| Fn4| Function key Fn4, press it to enter the menu or parameter item displayed on the right screen
6| SET| Function knob, adjust the current menu or adjust the current parameter value
7| POWER| Power switch, toggle to the battery end to supply power to the battery, toggle to the DC end to supply power to the adapter
8| DC| Adapter power input DC jack

Function description
US1014RGB photography lights are divided into three working modes: CCT, HSI and EFFECTS. The usage methods are as follows:

White light (CCT) mode

In HSI mode

After the product is turned on, it can be cycled through the MODE button (CCT, HSI, EFFECTS) Operation in HSI mode: Brightness adjustment —> Press the Fn1 key to select the brightness parameter in the screen, and then adjust the brightness through the SET function rotary knob. Color temperature adjustment —> Press the Fn3 key to select the color temperature parameter in the screen, and then adjust the color temperature through the SET function rotary knob. color saturation adjustment Press the Fn4 key to select the saturation parameter in the screen, and then adjust the color saturation through the SET function rotary knob.

Channel adjustment Press the Fn2 key to select the Gr parameter on the screen, and then use the SET function rotary knob to adjust the Gr group (group A-C).

Group adjustment Press the Fn2 key to select the Ch parameter in the screen, and then use the SET function rotary knob to adjust the channel value (ch1-ch15).

In EFFECTS mode

After the product is turned on, it can be cycled through the MODE button (CCT, HSI, EFFECTS) Operation in EFFECTS mode: Brightness adjustment —> Press the Fnl key to select the brightness parameter in the screen, and then adjust the brightness through the SET function rotary knob. EFFECTS adjustment–> Press the Fn3 key to select the EFFECTS parameters on the screen, and then use the SET function rotary knob to adjust different EFFECTS.

Group adjustment – -> Press the Fn2 key to select the Gr parameter on the screen, and then use the SET function rotary knob to adjust the Gr group (group A-C).

Channel adjustment –> Press the Fn2 key to select the Ch parameter in the screen, and then use the SET function rotary knob to adjust the channel value (chi -chi 5).

APP Operation guide

Use a mobile phone to scan the above code to download the APP, or search and download the APP “LightAttendant” from Google Play(Android) or APP Store(iPhone IOS )
To turn APP on, you need to agree all necessary permissions and function switches. If Bluetooth is not enabled, it will prompt you to turn on Bluetooth to scan and connect the device. Select “Confirm to turn on Bluetooth” or manually turn on Bluetooth of the mobile phone (10S requires to turn on manually).
The product turned on normally. 4. Click “+” of APP (as Fig. 1)to enter the interface of “Scan to Device ” and scan the device. After a few seconds, photo of bound device and device name will be displayed as shown in Fig. 2. Click Add , it will display the Fig. 3 interface. When the words “Light status: Paired” shows up and click the interface Fig.3,then it goes into the interface like Figure
Click “Ch :1/Grp: A” on the upper right of the interface in Figure 4 to select the SAME Grp CH as the light. By selecting different options on the top right side of the APP, the controlled devices will also be adjusted to corresponding option. Slide the grey block which shows the light status “Paired”(in Fig.3) to the left side, then the interface in Figure 5 will show up. Click ” Delete” in Figure 5, the corresponding interface will appear to prompt you to delete the paired device.

Note : Click “Help” on each screen of the APP will show the operation guide.

( When a device is not found during scanning, please make sure if the light is turned on or the Bluetooth in the mobile phone is enabled. then repeat above ).

Product size

Unit: mm Tolerance: ± 1.0mm L=384.5 W=38.9 H=274.5

Product size

Product parameter

Serial number	Item	Specifications
1	Product features	TFT color screen display, interactive operation

Cautions

This light is not have dustproof and waterproof functions.
Do not let the light fall to the ground, be hit by collision or strong impact.
Do not cover the ventilation hole, otherwise the internal temperature may rise and cause fire or accident, which may cause the accident.
Do not look directly at the white LED, otherwise it may cause visual impairment.
Do not place the lights near flammable or easy—to—play solutions, which may cause fire or smoke.
The switch must be turned to “OFF” when finish the working.
If don’t use led light or finish the working, please take out the NP-F batteries.
Please do not put the light into the storage box immediately after use; the heat may cause damage to the white LED. It should be cooled thoroughly before being placed in the storage box.
- Specifications and appearance are subject to change without notice.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.