Mertorium HN-108 Galaxy Star LED Projector User Manual
- June 10, 2024
- Mertorium
Table of Contents
Mertorium HN-108 Galaxy Star LED Projector
INTRODUCTION
Thank you for purchasing our product, please read the instruction manual carefully before use. The instruction manual contains necessary safety recommendations and user instructions, please operate in accordance with the instruction manual to avoid damage to the product due to misoperation. When you receive the product, please check whether the product is damaged.
Package List
- Aurora sky projector 1 PC
- Remote control 1 PC
- User manual 1 PC
- USB Charging cable 1 PC
Instructions
- Using the projector: Connect the machine and the power adapter with the USB power cable, and then plug the adapter into the AC outlet.
- Press the turn-on button to start the machine.
- Sound playing: After connecting the projector to the USB charging cable and the AC adapter, you will hear the sound of Bluetooth turned on: Then open the Bluetooth function of your phone, search, and find the device name ‘HN-108″ to connect.
- Bluetooth parameters: Bluetooth 5.0 2.4GHz with Low Power Consumption and Long Distance. The Bluetooth chip memory is 16MB, and the Bluetooth receiving distance is 30 meters open Working frequency Band: 2.4GHz-2.48GHz License Free ISM Frequency Band.
Use of remote control
Product Parameters
| Input Power: | USB DC 5V2.0A |
|---|---|
| Laser generator-Wavelength: | 515-532nm(Green) |
| LED(Red,Green,Blue): | 3W |
| Acoustics: | 3W |
| Operating Temperature: | 0-30°C/32-89°F |
| Projection Range: | 15-50 Square Meters |
| Energy consumption: | Less than 8W |
| Dimension: | 14X13X6.6cm |
| Weight: | 295g |
The product is delivered with USB to type-c cable.
Notice
- Please operate the projector according to the manual.
- This product is intended for indoor use only.
- Avoid humid places.
- The operating temperature of this unit is Q.3Q<)C/ 32-89°F.
- After 6 hours of use, we highly advise you to turn off the project or allow the laser diode to cool down. Do not turn the projector on and off too frequently.
- DO Avoid direct eye contact with the laser beams.
- Store in the original packaging after use.
Warning
-
The grade of the laser Class 1 DO NOT expose eyes to the
the light which is dangerous. -
The working Voltage is USB DC 5V, DO NOT exceed this range. Or its lifetime will be shortened. Please use a power a da pt er greater than 2A. The projector will not work normally if the current is too small.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>