TEKION CCD1 Connected Car Device User Manual

: June 10, 2024
: TEKION

TEKION CCD1 Connected Car Device

TEKION -CCD1-Connected-Car-Device-
Product-image

Tekion Connected Car Device-CCD1

Overview

OBDII Gen2 is the next generation of On-Board Diagnostic system
enabled with IOT tracking and cloud connectivity.

Contents in the Box

Product overview
Product Specifications
Dimensions Weight User Interface
On-Board Battery Charging through
Operating Modes Housing Power
130.74×59.738x30mm ~181gram/0.4lbs LCD Display Power ON/OFF Button User button Torch button & Led Indication RGB Led Connectivity and
Charge Indication Flash led USB Type C Wireless ]
Charging pad USB Type C OBD Port
ABS Plastic Enclosure with IP65 Protection
On Board Li-Po Battery-2000mAH USB Type C Vehicle OBD Port

Product Usage Instructions

Charging the OBD Battery

5.1 Charging through Wireless Pad

To charge wirelessly, a charging pad is required. Connect a USB
type C charger to power the charging pad. Once the charging pad is
powered, place the OBD on the charging pad. A green light will
light up on the OBD indicating that the battery is charging.

5.2 Charging through USB

The OBD battery can be charged through the USB type C port by
plugging it into the USB connector. A 5V@2A adapter is required for
charging the OBD through the USB port.

5.3 Charging through OBD

The OBD can be charged by plugging it into the vehicle’s OBD
port.

Powering ON/OFF the OBD

7.1 Power ON

To power ON the OBD, press the Power button for a second. The LCD display will show the Teknion logo. After powering on, the OBD starts booting which takes about a minute to resume normal operation.

7.2 Power OFF

To power OFF the OBD, press and hold the power button for about 5-6 seconds.

Device Provisioning

Power on the device.
Open Tekion Mobile application for Auto Dealerships.
Go to Walk-in page and click on the OBD Icon.
Scan the QR code on top of the OBD device. Confirm the Bluetooth pair request in Mobile app.
Acknowledgement OBD details (MAC id, OBD name) are reflected on the Mobile App.
User shall be able to see the scanned mobile app username on the LCD of OBD device.
OBD got provisioned with user details.

Modes of operation

Active mode: All the peripherals like Radio (Wi-Fi/BLE/LTE), LED’s , LCD’s and Core are functional and running.

Conditions to Enter Active Mode:

OBD plugin/out from the vehicle OBD socket.
OBD connected/Disconnected to Wired and Wireless charger.
OBD Power Button press.
On Expiry of the Sleep Timer.

Sleep mode: All the peripherals including Core will be in suspended Mode waiting for the Actives events to occur.

Conditions to Enter Sleep Mode:

2 Mins of ideal time will make OBD to enter sleep (suspend) Mode.
Ideal Time is configurable through Cloud.

Overview

OBDII Gen2 is the next generation of On-Board Diagnostic system enabled with IOT tracking and cloud connectivity.

Contents in the Box

OBD
User manual

Product overview

TEKION -CCD1-Connected-Car-
Device-01

Product Specifications

Dimensions	130.74×59.738x30mm
Weight	~181gram/0.4lbs
User Interface	LCD Display
Power ON/OFF Button
User button
Torch button & Led Indication
RGB Led Connectivity and Charge Indication
Flash led
USB Type C
On-Board Battery Charging through	Wireless Charging pad
USB Type C
OBD Port
Operating Modes
Housing	ABS Plastic Enclosure with IP65 Protection
Power	On Board Li-Po Battery-2000mAH
USB Type C
Vehicle OBD Port
Operating Temperature	0-45 oC
---	---
Storage Temperature	0-50oC
OBD Protocol Supported	High Speed CAN
Medium Speed CAN
SW CAN
SAE J1850 VPW & SAE J1850 PWM
ISO 9141-2 & ISO14230 KWP
OEM Specific DOIP
Wireless Connectivity	LTE
Wi-Fi
Bluetooth
GPS

On-Board battery charging option

OBD has 3 options for charging on-Board Battery.

Charging through Wireless Pad
Charging through USB
Charging through OBD plug-in to vehicle

Device State	Charge Status Indication
Battery is charging	Green Solid
Charging Complete/ Charge adapter not connected	No Indication

Charging through Wireless Pad

To charge wirelessly, charging pad is required. Connect USB type C charger to power the charging pad. Once charging pad is powered, place the OBD on charging pad. Green light will lit on OBD indicating battery is charging.

Charging through USB

OBD battery can be charged through USB type C port by plugging to the USB connector. 5V@2A adapter is required for charging OBD through USB port.

TEKION -CCD1-Connected-Car-Device-03

Charging through OBD

OBD can be charged by plugging the OBD to vehicle’s OBD port.

Led Indications

OBD Power ON/OFF

Power ON

To power OBD, press Power button for a sec. LCD display will show Tekion logo

After power on, OBD starts booting which takes about a minute to resume normal operation

Power OFF

To power OFF OBD, press & hold the power button for about 5-6 seconds

Device Provisioning

Step-1 : Power on the device.
Step-2 : Open Tekion Mobile application for Auto Dealerships
Step-3: Go to Walk-in page and click on the OBD Icon.
Step-4 : Scan the QR code on top of OBD device. Confirm the Bluetooth pair request in Mobile app
Step-5 : Acknowledgement OBD details (MAC id, OBD name) are reflected on the Mobile App.
Step-6 : User shall be able to see the scanned mobile app username on the LCD of OBD device.
Step-7 : OBD got provisioned with user details.

Modes of operation

Active mode: All the peripherals like Radio (Wi-Fi/BLE/LTE), LED’s , LCD’s and Core are functional and running.

Conditions to Enter Active Mode:

OBD plugin/out from the vehicle OBD socket.
OBD connected/Disconnected to Wired and Wireless charger
OBD Power Button press
On Expiry of the Sleep Timer.

Sleep mode
All the peripherals including Core will be in suspended Mode waiting for the Actives events to occur.

Conditions to Enter Sleep Mode

2 Mins of ideal time will make OBD to enter sleep (suspend) Mode.
Ideal Time is configurable through Cloud.

Torch Led Indication

Torch button can be turned ON by pressing the Torch button. Light will turn ON till button is pressed and gets switched OFF when button released.

TEKION -CCD1-Connected-Car-Device-06

Safety and Precautions

Although OBD circuit design incorporates multiple protections circuits, certain precautions must be taken while usage.

OBD should be stored within storage temperature limit.
Avoid usage if any chemical spill.

FCC Warning

Class A
NOTE
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Tekion Connected Car Device CCD-V1 User Manual