verizon Gizmo Watch 3 User Manual
- June 10, 2024
- Verizon
Table of Contents
- Setting Up Your Gizmo Watch
- Preparing Your Smartphone
- Wearing Your Gizmo Watch
- Swapping the Loop Strap
- Replacing the Wristband
- Turning Your Gizmo Watch On and Off
- Activating and Pairing Your Gizmo Watch
- Using Your Gizmo Watch
- Making a Call
- Receiving a Call
- Sending a Message
- Receiving a Message
- Additional information
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
verizon Gizmo Watch 3
Setting Up Your Gizmo Watch
Charging Your GizmoWatch
Before you start, charge your watch completely.
-
Line up the gold pins on the charging cord with the charging contacts on the back of the watch. The watch and charging cord are magnetized and should connect without effort.
NOTE: The image is for illustration purposes only and appearance of the actual wrist strap pattern may vary. -
Plug the other end of the cord into the charging adapter and plug the adapter into an electrical outlet.
WARNING: Use only approved chargers with your device. Incompatible chargers or tampering with the charging contacts could damage your device and void the warranty.
Preparing Your Smartphone
Download the Gizmo Hub app from the Google Play™ Store or the Apple® App Store®.
The Gizmo Hub app lets you set up, call, message, find and control your child’s Gizmo Watch.
Wearing Your Gizmo Watch
-
Wrap the wristband around your child’s wrist, making sure that the camera is on top of the screen.
-
Slide the wristband through the buckle and adjust for comfort (A).
-
Insert the pin on the underside of the buckle into one of the holes on the wristband (B).
-
Slide the wristband through the loop (C).
NOTE: The watch should fit snugly, but not too tightly, around your child’s wrist.
Swapping the Loop Strap
NOTE: Additional loop straps are supplied in three different colors: orange, green, and b
-
Pull the release knob all the way in the opposite direction (A).
-
Detach the wristband from your Gizmo Watch (B).
-
Remove the loop strap from the wristband (C).
-
Replace the loop strap (D).
Replacing the Wristband
-
Insert the pin (the opposite side of the release knob) into the pin hole on your Gizmo Watch (A).
-
Pull the release knob all the way in the opposite direction and align the other end of the pin with the hole on your Gizmo Watch (B). Release the knob to lock the wristband in place.
Turning Your Gizmo Watch On and Off
To turn your watch on, press and hold the Power button until the screen lights up.
To turn it off, press and hold the Power button until you see “POWER OFF WATCH?” on the screen. Then tap to turn off your watch.
Activating and Pairing Your Gizmo Watch
Follow the instructions in the app and on your Gizmo Watch to complete setup.
Using Your Gizmo Watch
NOTE: Screen images and icons are for illustration purposes only and may differ from the actual device.
Adjusting the Volume
Swipe to the left from the Watch screen until you see the Settings Menu.
Tap to go to the Volume screen. Then drag around the circle to adjust the volume levels.
Alternatively, you can use the bottom Increase (+) or Decrease (-) volume controls.
Making a Call
- From the Watch screen, swipe left to open the Contact List. Then select the contact you want to call.
2. Tap to make audio call.
3. Tap to make video call.
NOTE: Your Gizmo Watch can only make and receive calls from phone numbers on your child’s Contact List. These numbers may be for mobile phones, landlines, and other Gizmo devices. You can manage the Contact List in the Gizmo Hub app.
Receiving a Call
When someone from your child’s contact list calls the Gizmo Watch, it will ring and the caller name will be shown on the screen.
-
To answer the call, tap .
-
To reject the call, tap .
-
To end the call, tap .
TIP: To adjust the volume during the call, tap .
NOTE: Making and receiving calls and messages requires a network connection.
Sending a Message
-
From the Watch screen, swipe left to open the Contact List. Then select the contact you want to message.
-
Tap to create a new message. Then:
• To create a voice message, tap .
• To choose from a list of prewritten messages, tap .
• To send a emoji, tap .
Receiving a Message
When the Gizmo Watch receives a new message, it will appear on the Home screen. To reply, tap the contact
NOTE: Your Gizmo Watch can only receive messages from contacts with the Gizmo Hub app or from other Gizmo devices if the sender is a Gizmo Buddy. It can’t receive messages from non-Gizmo devices.
Additional information
Your wireless device and third-party services
Verizon is the mobile carrier associated with this wireless device, but many
services and features offered through this device are provided by or in
conjunction with third parties.
Verizon is not responsible for your use of this device or any non–Verizon
applications, services and products, including any personal information you
choose to use, submit or share with others.
Specific third-party terms and conditions, terms of use and privacy policies
apply. Please review carefully all applicable terms, conditions and policies
prior to using this wireless device and any associated application, product or
service.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>