MATRIX ICR50 IX Display and LCD Console Installation Guide

Matrix ICR50
IX Display & LCD Console Guide

IX Display
The high-definition, 22-inch IX Display completes the immersive experience when you mirror your smartphone, tablet, or digital media player to stream live and on-demand classes, virtual courses, or your favorite entertainment.
Important: This is NOT a console. This is simply a monitor to mirror a device.

Connecting a Device

Connect an HDMI-to-HDMI cable to the display (not included). Then, use a HDMI to USB-C or Lightning cable (cables not included) to connect a device to the open end of the HDMI cable to mirror your device on the 22″ LED screen.

Display Controls

The controls are located on the back of the display.

Using Zwift

You can download Zwift on your device and mirror it on the display.
Setup video: https://youtu.be/0VbuIGR_w5Q

Cleaning the Display

Use a micro-fiber cloth and LCD screen cleaner to clean your display as needed. If you do not have a screen cleaner, use a damp (with water) micro- fiber cloth instead.

LCD Console

The LCD console can be purchased and used with the ICR50 cycle. An RF sensor that comes with the console will need to be installed in the frame.

Console Overview

Use the console buttons to navigate through the console.

A. WORKOUT TRACK

• Solid = In-progress RPM workout

• Blinking = Goal to achieve (Program 2 only)
  B. TARGET / RPM

• Program 1: Resistance target level

• Program 2: Current RPM

• Program 3: HR target
  C. WORKOUT PROGRAMS

• Select by pressing at standby page
  D. DISTANCE
  E. CALORIES / SPEED

• Press to switch
  F. HEART RATE
  G. WORKOUT TIME
  H. GOAL ACHIEVEMENT

• Light will illuminate once goal is achieved
  I. WIRELESS HEART RATE CONNECTION
  J. WORKOUT DATA

• To see AVG & MAX workout data, press: to pause to switch calories / speed to switch AVG /
  MAX
  K. BATTERY

• Indicates 100% or less, 70% or less, 40% or less, and 10% or less

Console Setup

1. Install the console bracket onto the handlebar, then slide the foam sheet between the handlebar and console bracket.
2. Install 4 AA batteries into the console.
3. Attach the console to the console bracket using 2 screws.
4. Remove the 4 screws and the handlebar adjustment knob from the frame, then remove the plastic cover.
5. Plug the unused wire into the RF Sensor.
6. Using the Velcro, mount the RF Sensor to the Main Frame.
7. Reinstall the plastic cover and handlebar adjustment knob.

Machine Settings

You may adjust settings to customize the console.
Press and hold   and   for 3 to 5 seconds to enter Machine Settings. The console will display “SET” when ready.

2. Press   to scroll to Miles  or KM.
3. Press to select and set  the frame model.| 3. Press to set the  selected brightness.| 3. With your selection shown, press to save
and set.

Cleaning the Console
Use a micro-fiber cloth and LCD screen cleaner to clean the console screen as needed. If you do not have a screen cleaner, use a damp (with water) micro- fiber cloth instead.
Useful Resources
At the link destination below, you will find information on product registration, warranties, FAQs, troubleshooting, setup/connectivity videos, and available software updates for consoles.  Matrix Fitness – https://www.matrixfitness.com/us/eng/home/support
Customer Technical Support – Please refer to your Owner’s Manual for warranty terms
Warranty Product

[email protected] 

Out-of-Warranty Product

[email protected] 

6 | Version 1 | January 2022
Table of Contents

Documents / Resources

| MATRIX ICR50 IX Display and LCD Console [pdf] Installation Guide
ICR50 IX Display and LCD Console, ICR50, IX Display and LCD Console, LCD Console, Console
---|---

References

• Amazon.com: Screen Cleaner Kit - Best for LED & LCD TV, Computer Monitor, Laptop, and iPad Screens – Contains Over 1,572 Sprays in each Large 16 ounce Bottle – includes Premium Microfiber Cloth : Electronics
• Matrix Fitness

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>