Light Matrix AI BOX Lite with Wireless Car Play Instructions
- June 2, 2024
- Light Matrix
Table of Contents
AI BOX
Instruction
Note: LE-LAN devices are restricted to indoor operation only in the band 5150-5250 MHz
Start Using
Overview
- Microphone
- Wall hanging groove
- Power button
- Speaker
- Charger connection port
Starting the device for the first time
It is recommended to charge the device at least 60 minutes before starting it
up for the first time.
The device can still be used while charging.
Turn on the device
Before turning on the device for the first time, make sure the battery has been
charged for at least 60 minutes
- Press and hold the power key until the screen lights up.
- Wait for the device to be activated.
Turn off device
- Press and hold the power button until the options menu opens.
- In the options menu, tap Shut down. The device will take some time to shut down.
Internet connection
- Press the upper right corner of the screen to enter the function menu bar and select Wi-Fi Setting.
- Select the corresponding wifi name and enter the password. Power key
AI Box interface description
Website description
AI Box requires uploading images to the specific website. Login and
registration
https://4dbox.lightmatrix3d.com/index
| Track dynamic columns
---|---
| All images
| Upload images
| Online mall
| Setting list
Product maintenance and safety recommendation
- Please handle the product carefully and keep it in a clean and dust-free place.
- WARNING! The product may explode if it comes into contact with a source of fire.
- Do not expose the product to excessive moisture.
- Do not use the product in an environment below -10°C or above +45°C to avoid performance degradation.
- Do not allow the product to come into contact with fire or lit cigarette butts.
- Never drop, throw or attempt to bend the product.
- Do not paint or attempt to disassemble or modify the product.
- Maintenance work can only be performed by Light Matrix’s authorized professionals .
- Please stop using the product or disable the wireless transmis -sion function as required.
- Never use the product in a potentially explosive gas and dust environment.
- Never place the product over a car air bag, or install wireless equipment over a car air bag.
- Special Note: A damaged display may contain sharp edges or debris that could create a risk of cuts.
Children
Warning! The product should be kept out of the reach from children. Strictly
prevent children from tampering with the device and its accessories. This may
harm the child or others. The product has small parts that can easily loose
and may cause choking hazards.
End User License Statement
The software and media provided with this product are the property of light
matrix and its suppliers and licensors.
Please do not discover the software source code or any components, reproduce
and distribute the software, or modify the software in any form. You have the
right to transfer the rights and obligations of the software to a third party,
but only together with the product you use to receive the software, and the
third party must agree in writing to these licensing terms. The authorization
is valid for the life of the product. Transfer of product ownership to a third
party will terminate the authorization. Failure to comply with the above terms
and conditions will immediately terminate the license. Light matrix and its
third party suppliers and licensors retain all right, title and interest in
and to the software. This license is subject to the laws of Taiwan.
If software provided with your product. The terms and conditions will be also
applied.
Limited warranty
Light matrix provides a limited warranty for your device (hereinafter referred
to as the “product”).
Warranty content
According to the conditions of the limited warranty, Light matrix guarantees
that the product will be protected against defects in design, materials or
workmanship for one year from the date of purchase by the customer.
Warranty coverage
During the warranty period under normal use and maintenance, if problems arise
due to defects in design, materials and workmanship, the authorized dealer or
service partner of Light Matrix in the country/region where the product was
purchased may contact you. You can choose to repair or replace this product
based on condi-tion.
If the product sent for repair does not comply with the warranty terms, Light
Matirx will charge fee.
Please note that when this product is sent for repair, some personal settings,
downloads or related data may be deleted. Due to relevant laws or other
regulations or technical restrictions, Light Matix currently unable to back up
downloaded content. Light Matrix does not assume any responsibility or make
any compensation for any loss of data caused by any reason.
Product name｜AI Box
Brand owner｜Light matrix Inc.
Tel｜+886-2-2713-3817
Address: 1st Floor, No. 115, Section 1, Hangzhou South Road, Zhong-
zheng District, Taipei City
Specific Absorption Rate (SAR) information
This device meets the government’s requirements for FCC exposure limits set
forth for an uncontrolled environment. This device was tested for typical
body-worn operations with the back of the AI BOX kept 0 mm from the body. To
maintain compliance with FCC RF exposure requirements, use accessories that
maintain an 0 mm separation distance between the user’s body and the back of
the AI BOX. The use of belt clips, holsters and similar accessories should not
contain metallic components in its assembly. The use of accessories that do
not satisfy thes e requirements may not comply with FCC RF exposure
requirements, and should be avoided.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any inte rference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.