defender CH-131 Car Holder User Manual
- June 10, 2024
- Defender
Table of Contents
CH-131 Car Holder
User Manual
CH-131 Car Holder
Connecting a pop socket to a smartphone
Remove the protective film from the adhesive part of the pop socket
Stick a pop socket on your smartphone
The pop socket can also be stuck on the smartphone case.
The cover must be rigid and have a smooth surface.
Pop socket does not attach to silicone cases
ATTENTION!!! Do not stick the plate over the NFC sensor! Do not stick the plate on your smartphone in case it has wireless charging function!
In case smartphone has NFC or wireless charging functions, stick the plate only on the smartphone case
Installing the holder on the car ventilation grille
Narrow space between clips for the thin deflector lamellas
Wider space between clips for the thicker deflector lamella
Inserting the pop socket into the holder
Insert a smartphone with a glued pop socket into the holder
Using a pop socket
Expand the folded pop socket to its maximum length and use it as a stand for a smartphone
CAR HOLDER OPERATION MANUAL
Terms and conditions of safe and efficient use of the product Usage precautions:
-
Use the product for its intended purpose only.
-
Do not disassemble. This product does not contain parts that are entitled to self-sufficient repair. On the question of maintenance and replacement of a failed item apply to a dealer or Defender authorized service center. While receiving the product make sure that it is unbroken and there are no freely moving objects inside the product.
-
Keep away from children under the age of 3. May contain small parts.
-
Keep away from humidity. Never immerse the product in liquids.
-
Keep away from vibrations and mechanical stresses, which can cause mechanical damaging of the product.
In case of mechanical damage no warranties are provided. -
Do not use in the presence of visual damage. Do not use when the product is obviously defective.
-
Do not use the product at temperatures below and above recommended temperatures (-30 – +50°C), under the conditions of humidity evaporation, as well as in hostile environment.
-
Do not put into the mouth.
-
Do not use the product for industrial, medical or manufacturing purposes.
-
In case when shipment of the product was conducted in subzero temperatures, then before operating, the product should be kept in a warm placement (+16-25°C or 60- 77°F) within 3 hours.
-
Do not use the device while driving the vehicle, if it is diverted attention, and in other cases when the law obliges you to turn off the device.
Features • Suitable for all types of smartphones • Can be used as a stand
Specification • Rotation: 360° • Material: plastic • Color: black
IMPORTER: Defender Technology OÜ, Betony stir 11, 11415, Tallinn, Estonia.
Manufacturer: China Electronics Shenzhen Company. Address: 35/F, Block A,
Electronics Science & Technology Building, Shenna Zhongli, Shenzhen, China.
Made in China.
Unlimited shelf life. Service life is 2 years. Date of manufacture: see on the
package.
Manufacturer keeps the right to change package contents and specifications
indicated in this manual.
The latest and detailed operation manual is available at www.defender-
global.com Made in China.