defender CH-112 Car Holder User Manual

defender CH-112 Car Holder User Manual

Installation

1. Degrease the place on the dashboard or on the wall/furniture where the holder will be attached
   

2. Remove the protective film from the holder base
   

3. Press the holder base with force for a few seconds against the cleaned surface of the dashboard or wall/ furniture
   

4. Remove the protective film from the metal plate and stick it on the previously cleaned and degreased phone surface or case

5. Remove the protective film from the adhesive part of the plate

6. Stick the plate on the phone case

7. The plate can also be glued to the smartphone case. Case must be firm and smooth. The plate can not be attached to silicone cases
   
   ATTENTION!!!
   Do not stick the plate over the NFC sensor! Do not stick the plate on your smartphone in case it has wireless charging function!

8. In case smartphone has NFC or wireless charging functions, stick the plate only on / under the smartphone case or put it under the case (the plate will be fixed only by the case and will not interfere with the wireless charging or NFC function without the case)
   

9. Place smartphone on the holder

10. Bring the smartphone close to the holde
    

11. Choose a comfortable smartphone position
    

12. An option to hang the cable on the holder
    

Terms and conditions of safe and efficient use of the product Usage precautions:

1. Use the product for its intended purpose only.

2. Do not disassemble. This product does not contain parts that are entitled to self-sufficient repair. On the question of maintenance and replacement of a failed item apply to a dealer or Defender authorized service center. While receiving the product make sure that it is unbroken and there are no freely moving objects inside the product.

3. Keep away from children under the age of 3. May contain small parts.

4. Keep away from humidity. Never immerse the product in liquids.

5. Keep away from vibrations and mechanical stresses, which can cause mechanical damaging of the product.
   In case of mechanical damage no warranties are provided.

6. Do not use in the presence of visual damage. Do not use when the product is obviously defective.

7. Do not use the product at temperatures below and above recommended temperatures (-30°C – +50°C), under the conditions of humidity evaporation, as well as in hostile environment.

8. Do not put into the mouth.

9. Do not use the product for industrial, medical or manufacturing purposes.

10. In case when shipment of the product was conducted in subzero temperatures, then before operating, the product should be kept in a warm placement (+16-25°C or 60-77°F) within 3 hours.

11. Do not use the device while driving the vehicle, if it is diverted attention, and in other cases when the law obliges you to turn off the device

Features

• Reliable fixation on the dashboard
• Metal plates to hold a smartphone are included

Specification

• Rotation: 360°
• Material: metal
• Color: black

IMPORTER: Defender Technology OÜ, Betooni str 11, 11415, Tallinn, Estonia.
Manufacturer: China Electronics Shenzhen Company. Address: 35/F, Block A, Electronics Science & Technology
Building, Shennan Zhonglu, Shenzhen, China.
Date of manufacture: see on the package
Manufacturer keeps the right to change package contents and specifications indicated in this manual. The latest and detailed operation manual is available at www.defender-global.com
Made in China.

References

• Defender

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>