OAKYWOOD QI Compatible Dual Wireless Charger User Manual
- June 4, 2024
- OAKYWOOD
Table of Contents
- OAKYWOOD QI Compatible Dual Wireless Charger
- USE INSTRUCTION
- NOTICE
- PRODUCT SPECIFICATION
- CARE INSTRUCTION
- OAKYWOOD • POLAND, EU
- DECLARATION OF CONFORMITY
- SIMPLIFIED EU DECLARATION OF CONFORMITY
- EXCLUSION OF LIABILITY
- WARRANTY
- FCC WARNING
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
OAKYWOOD QI Compatible Dual Wireless Charger
USE INSTRUCTION
- Insert one end of USB-C charging cable into power adapter
- Insert another end of USB-C charging cable into USB-C port of the wireless charger.
- Place your phone on one of the charging spots of the wireless charger. Make sure that the phone is well located at the charging area of wireless charger (phone charging notification)
NOTICE
- Do not keep your magnetic cards, keys or any metal objects on the charger
PRODUCT SPECIFICATION
- Model: OW-DWC01
- Input: 12V-3A, 15V-3A
- Output: 2 x 5W, 2 x 7.5W, 2 x 10W, 2 x 15W
- Product standard: WPC V1.2.4
- Conversion rate: 80%-85%
- Transmission distance: 3-8mm
CARE INSTRUCTION
- Keep the charger away from water or other liquids!
- Clean when needed with a soft cloth following the grain pattern, after removing the possible abrasive dust particles, clean it with a moist cloth. Dry immediately with soft cloth following wood grains.
OAKYWOOD • POLAND, EU
At Oakywood, we pride ourselves on crafting innovative products made of solid wood. We are a small batch woodworking workshop, really just a bunch of guys and wood. We are passionate about making high-qualityproducts that make our lives easier. Hope you will enjoy it!
DECLARATION OF CONFORMITY
The CE marking says that this product meets the requirements of all EU Directives applicable for this product
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby OAKYWOOD Sp. z o.o. declares that the radio installation type Slim Wireless Charging Pad complies with the Directive 2014/53/EU. The complete text of the EU Declaraion of Conformity is available at the following Internet address www.oakywood.shop.
EXCLUSION OF LIABILITY
The firmware and/or hardware may be changed at any time without prior notice. For this reason it is possible that parts of these instructions, technical data and images in this documentation differ slightly from the product in your posession. All points described in these instructions only serve the purpose of clarification and must not inevitably correspond to a certain situation. Legal claims cannot be made on the basis of these instructions.
WARRANTY
Information about the warranty and the warranty conditions can be found at www.oakywood.shop.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance between 20cm the radiator your body.
- The crossed out wheeled bin placed on: a product label, a battery, a product or a packaging means that all waste electrical and electronic equipment and batteries should not be disposed of in the communal waste bin with other waste. Waste electrical and electronic equipment and batteries must be handed over to specialised collection points established pursuant to local regulations.
- Incorrect handling of electrical and electronic equipment, including mismanagement of waste from used equipment may result in multiple environmental and health hazards due to the presence of possibly dangerous substances, mixtures and components in the equipment.
- The customer is responsible for the correct handling of waste, since households play an important role in the reuse and recovery (including recycling) of waste equipment. An owner of waste equipment originating from a household is required, in accordance with the waste electric and electronic equipment regulations in force, to hand it over to a collector of waste equipment or to entities which provide non-professional collection of waste electric or electronic equipment. Such entities include wholesale and retail sellers (distributors), who have an obligation to accept waste equipment free of charge in accordance with the principles below:
- a distributor is required to accept waste household appliances at the point of sale, free of charge, on the condition that the waste appliance is of the same type and fulfilled the same functions as the appliance being sold;
- a distributor is required to accept waste household appliances at the place of delivery when delivering household appliances to a purchaser, free of charge, on the condition that the waste appliance is of the same type and fulfilled the same functions as the appliance being supplied;
- a distributor operating a retail store with a sales area of at least 400 m2 devoted to the sale of household appliances is required to accept at the store or in its direct vicinity, free of charge, waste household appliances with external dimensions not exceeding 25 cm in any direction without requiring the purchase of new household appliance.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>